Availability
Our Summit Racing™ complete front drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. The kits are available in standard and ultra versions (ultra versions include cross-drilled, slotted rotors and braided brake lines). Order the model recommended for your vehicle. Summit Racing™ complete brake conversion kits include: * Power brake booster * Master cylinder * Proportioning valve kit (where applicable) * Rotors * Calipers * Backing plates (where applicable) * Spindles or brackets to convert existing spindles (depending on application) * Brake hoses and banjo bolts (where applicable) * Bearings * Seals * Dust caps * Spindle nuts and washers * Installation hardware
( 39 )
$907.95
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$815.95
—
$854.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$819.00
—
$1,075.20
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 69 )
$979.99
Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.
( 108 )
$753.99
—
$1,044.99
QA1 Pro coilover systems are engineered from the ground up to offer unmatched performance over stock suspension setups. Pro coilover systems utilize adjustable and non-adjustable coilover shocks and springs designed specifically for replacing the factory shocks and springs. This combination offers ride height adjustment and variable position valving adjustment (where applicable) for performance not found in other kits. Choose QA1 Pro coilover systems for your next suspension upgrade.
( 343 )
$809.96
—
$964.95
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 104 )
$759.56
—
$1,049.95
Summit Racing™ Pro LS Swap aluminum radiator and fan combo kits are available for most popular LS swap applications. The kits include a quality-constructed aluminum radiator to provide exceptional weight savings over stock equipment, fan shroud, and a radiator cap. The radiators come in a variety of configurations, each possessing their own unique combination of features, to work for the specific make and model vehicle that they're intended. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. Select the Pro LS Swap radiator and fan shroud combo designed for your application.
( 1 )
$859.99
—
$989.99
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 192 )
$768.54
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$771.00
—
$1,025.00
Ringbrothers helps you customize your ride with their billet hood hinges. Making your ride show-quality means thinking about the little things--the details--and these beautiful hood hinges open up top-show possibilities! Ringbrothers invented the first billet hood hinges. They have a superior product line because of years of perfecting the machining process. For example, their special cutting fluid is mixed to a specific concentration and the water is treated to the proper ph levels before machining begins. Additionally, all of the cutters are put into a sequence during machining to eliminate as many unwanted scratches as possible. These billet hood hinges are precision-machined from 6061-T6 aluminum and include your mounting hardware. Rest assured that their quality components and materials will provide you with years of hassle-free operation. It's time to upgrade those stock hinges with quality-driven Ringbrothers billet hood hinges! Features include: * Machined from 6061-T6 billet aluminum * Direct replacement fitment * No modifications necessary * Hinges place your hood in the same position every time * Installation hardware and instructions included * Available for fiberglass or steel hoods * Available in two styles and three finishes
( 8 )
$800.00
—
$850.00
BMR A-arms stabilize your vehicle. A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. BMR Suspension A-arms are fabricated from heavy-duty 0.095 in. wall DOM tubing with laser-cut, CNC-formed plate steel for extra strength and to eliminate deflection. BMR A-arms are fitted with heavy-duty ball joints and 95-durometer polyurethane bushings for a solid, more responsive feel over the stock rubber bushings. Polyurethane adds strength and reduces deflection over the stock rubber bushings, while still absorbing much of the NVH, providing you with a great blend of performance and comfort. Designed for street performance, drag race, handling, and pro-touring applications, BMR A-arms give you improved geometry and increased lateral grip during cornering situations.
( 110 )
$809.95
—
$1,029.95
Classic Performance Street Beast hydraulic brake assist kits will upgrade your manual or vacuum-assisted brakes. They're designed to work off your standard power steering pump. The Street Beast kits include an aluminum master cylinder, firewall mounting bracket, side-mounted proportioning valve and stop block kit, rubber pressure and return hoses, and all necessary fittings and mounting hardware. CPP also offers the hydraulic brake assist unit separately. Get the stopping power you've always needed with a Classic Performance Street Beast hydraulic brake assist kit, available for hundreds of applications from the 1950s and up.
( 34 )
$978.99
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 37 )
$1,049.95
$781.95
—
$943.95
RideTech HQ Series 4-Link coilovers feature a monotube gas pressure design that offers fade-free performance. Their springs are made of high-tensile premium steel that's CNC cold-wound. They weigh less, are more resistant to bowing, and have increased travel with a durable powdercoated finish. Machined from impact-forged aluminum for superior strength, these shocks feature a large piston that provides outstanding ride quality, a double-sealed rod guide with a dust cover that eliminates oil leakage, and an anodized finish that protects against corrosion. RideTech HQ Series 4-Link coilovers give hot rodders the ultimate in ride quality, handling, and performance. Order the kit designed for fitment on your vehicle application.
( 7 )
$756.00
—
$840.00
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 366 )
$850.95
—
$1,003.95
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 104 )
$750.99
—
$857.99
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 82 )
$1,005.02
The Right Stuff disc brake conversion kits are specially designed to fit any factory 14 in. wheel, but also work well with larger wheels. This includes the OEM steel wheels found on many vehicles that came equipped with drum brakes. These conversion kits mount to your stock drum brake spindles, streamlining installation compared to kits that require a spindle change. Order the assembly options designed for your vehicle. Additional features include: * Proprietary 10.5 in. rotors to clear 14 in. wheels * Less wheel offset compared to traditional disc brake conversion kits (amount varies by application) * 1967-72 GM A-body, 1967-69 F-body, and 1968-74 Novas bolt to OEM drum spindles with no modifications * 1964-66 GM A-body applications require the two lower holes in the drum spindle and steering arm to be drilled out to 1/2 in. * No backing plates are included or required
( 129 )
$859.05
—
$940.65
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$831.00
—
$997.00
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,115.95
—
$1,149.95
$1,003.95
—
$1,033.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
