Availability
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.
( 10 )
$5,959.74
—
$8,286.95
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
Detroit Speed hydroformed subframes are bolt-in replacements for the original stock subframe. They're designed to improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the only subframes in the aftermarket industry with hydroformed frame rails—which offer strength and stiffness, precise quality, and repeatability. Hydroforming preserves the steel's integrity because it's crafted at low temperatures, unlike traditional high-temperature processes which decrease material strength. Dozens of models are available for vehicles from the 1960s, '70s, and '80s. Order the package recommended for your application. Detroit Speed hydroformed subframes also include: * Stamped crossmembers * Tubular upper and lower control arms * Coilover shocks with "Detroit Tuned" valving * Coilover spring * Power rack and pinion steering * Splined sway bar * C6 steering knuckles and bearing packs
Not Yet Reviewed
$9,389.95
—
$11,490.95
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.
Not Yet Reviewed
$8,247.08
—
$10,706.95
RideTech 1968-72 GM X-body coilover suspension systems include everything you need to completely upgrade your existing suspension. They contain front upper and lower control arms, tall spindles, front MuscleBar, a rear 4-Link, and four HQ Series coilovers for every corner of your vehicle. The RideTech tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop, which allows for the use of longer shocks—creating more suspension travel. The bolt-on 4-link vastly improves traction, handling, and ride quality. Installation doesn't require any major modifications to the floor pan and requires only minimal welding to the axle tube (works with mini tubs). The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1968-72 GM X-body coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, parts, and specs: * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joints have been moved back to allow for additional caster setting (improves high-speed stability and steering feel; offset slugs also available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Lower shock mount dropped to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink end links that provide immediate engagement between chassis and control arms)
Not Yet Reviewed
$5,875.00
RideTech 1973-74 GM X-Body coilover suspension systema include everything you need to upgrade your existing suspension completely. Each package contains front upper and lower control arms, tall spindles, front sway bar, a rear 4-Link, and four HQ or TQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all of the guesswork. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Order the system recommended for your specific application. Additional product features: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop which allows for the use of longer shocks, creating more suspension travel * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings * Bolt-on 4-link greatly improves traction, handling, and ride quality. Installation does not require any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini tubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack (NOTE: Some 1973-74 cars have a different shape frame rail and require kit number 11260202. See the instruction manual for identification details.)
Not Yet Reviewed
$5,875.00
—
$8,015.00
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$5,100.00
RideTech 1968-74 Nova air suspension systems provide the components to achieve an ultra-low stance, while improving the suspension geometry for added drivability. All you need to add to these kits is one of RideTech's compressor systems. RideTech 1968-74 Nova air suspension kits include: * RideTech tall spindles induce more negative camber gain to maximize tire contact patch during cornering * Upper and lower front StrongArms * HQ Series Shockaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling * Front MuscleBar helps reduce body roll, crates room for wider tires, and includes PosiLink endlinks * Bolt-on 4-link greatly improves traction, handling, and ride quality
Not Yet Reviewed
$6,065.00
Transform your vehicle's handling with one of these Hotchkis Sport Suspension Stage 2 TVS systems. They provide completely tuned suspension handling, improved driver safety and control, and an easy bolt-on installation. The systems have been designed and rigorously tested on the track, and yet are comfortable enough for your local cruise-in. Every aspect of the suspension has been reengineered for maximum performance, providing your vehicle with the ultimate suspension system.
( 5 )
$5,440.91
—
$5,626.18
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
QA1's 4-link conversion and narrowed Ford 9 in. axle kits are an all-in-one solution that gives you everything you need to get your First-Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom narrowed 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. These QA1 upgrade kits have been engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to outsource each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your car as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Key Features: * Narrowed housing to accommodate wide wheel and tire packages in mini tubbed cars * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$5,525.95
Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.
Not Yet Reviewed
$6,331.95
QA1's 4-link conversion and standard Ford 9 in. axle kits give you everything you need to get your 2nd Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. Each kit is engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to source each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your vehicle as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Performance housing features: * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$5,525.95
RideTech 1973-74 air suspension systems fit a variety of vehicles—including Chevy Nova, Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models. These packages allow you to achieve that ultra-low show stance and feature several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Each system includes front and rear HQ or TQ Series ShockWaves, upper and lower StrongArms, tall spindles, bolt-on 4-Link and front MuscleBar. Order the model recommended for your application. Additional product details: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop which allows for the use of longer shocks, creating more suspension travel * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Shockwaves utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for under-hood access * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings * Bolt-on 4-Link greatly improves traction, handling, and ride quality. Installation does not require any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the race track (Noe: Some 1973-1974 cars have a different shape frame rail and require kit number 11260297. See instruction manual for identification details.)
Not Yet Reviewed
$6,065.00
—
$8,385.00
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
Not Yet Reviewed
$5,344.95
Wilwood SX6R front brake kits deliver an extreme performance upgrade—featuring WCCB carbon-ceramic dynamic mount rotors with the exclusive Bobbin Mounting System. They're engineered to maximize braking capacity inside custom wheels. These Big Brake kits offer a simple bolt-on installation, with minor modifications required to the front spindle only, and are fully compatible with ABS and OE master cylinder output. SX6R calipers were designed specifically to provide high-capacity braking with large diameter rotors for extreme-duty and race vehicles. It's the largest dual-purpose caliper Wilwood has produced, assuring big brake performance for street and track vehicles. Kits are available with caliper color options; check fitment on the Application tab.
Not Yet Reviewed
$9,121.83
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$5,081.03
QA1 Level 3 Drag Racing suspension kits furnish your vehicle with the ability for a better launch, straight-line stability, and consistent performance. These kits utilize high-quality parts engineered together as a system to take the guesswork out of choosing the right pieces to support your performance goals. Many feature QA1's MOD Series front drag suspension kit or MOD Series front or front and rear Pro Coil system matched with Drag Race control arms and additional components to equip your vehicle with race-winning performance. Choose the kit designed for your vehicle.
Not Yet Reviewed
$8,556.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
