Availability
Showing In Stock Items. Show All 21 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$155.95
$126.85
—
$140.35
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$133.95
—
$285.95
$120.55
—
$257.35
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$155.95
—
$182.95
$140.35
—
$164.65
On Sale
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 100 Classic Series polished wheels. They'll amp up your ride's aesthetics with some old-school charm in a classic 5-spoke design that is sure to look great on both old and new muscle cars! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series polished rims designed to fit your application!
( 10 )
$181.95
$163.75
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$126.95
—
$132.95
$114.25
—
$119.65
On Sale
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
$166.49
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$249.95
$224.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$199.95
—
$212.95
$179.95
—
$191.65
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$199.95
$179.95
On Sale
Create a solid, luxury car feel and take the guesswork out of sound deadening with Dynamat Xtreme Custom Cut kits! They isolate vibrations, reduce heat, and stop noise for a cool, quiet, and comfortable ride. Custom Cut kits are made specifically for your application, precut to the exact sizes that you'll need for your vehicle's interior sheet metal or fiberglass. Dynamat Xtreme with Vector Chemistry is a patented sound deadener with a .060 in. layer of butyl and a .004 in. aluminum face. They provide the highest efficiency of sound deadening properties available. You'll experience better sound and bass from your music and eliminate annoying road noises. Simply peel and stick these self-adhesive Dynamat Xtreme kits to your interior surfaces for amazing results. Use them on doors, floors, hoods, trunks, and roofs for the ultimate in driving comfort! Dynamat Xtreme Custom Cut kits are offered for a variety of applications in a choice of coverage areas.
( 72 )
$133.95
—
$166.95
$120.56
—
$150.26
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$199.95
—
$216.95
$119.95
—
$179.95
On Sale
Koni offers classic shocks for a half-century of applications, from the 1940s and up. They deliver upgraded performance in handling and ride quality to cars and trucks driven on paved roads. Order the model recommended for your vehicle.
( 51 )
$153.54
—
$172.37
$144.33
—
$162.03
On Sale
Do you have a street rod, muscle car, or sport truck? Whatever your choice, Vision American Muscle 141 Legend 5 Series wheels are sure to add the styling that you desire. A classic design, coupled with one-piece cast construction and a sparkling chrome finish, make Vision Wheel Legends an all-around great wheel choice. These wheels are designed to be used with 3/4 hex head lugs or smaller. Add a set to your next project or current ride and you're sure to be pleased.
( 24 )
$260.99
$260.10
On Sale
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 100 Classic Series chrome wheels. They'll amp up your ride's aesthetics with some old-school charm in a classic 5-spoke design that is sure to look great on both old and new muscle cars! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series chrome rims designed to fit your application!
( 2 )
$263.95
—
$269.95
$237.55
—
$242.95
On Sale
Vision American Muscle 54 Cheyenne Series wheels feature a recessed center hub designed for exposed lugs—surrounded by soft trapezium windows. The one-piece cast aluminum rims have a matte silver finish with machined lip, and are available in a variety of widths, diameters, bolt patterns and other fitment options.
( 3 )
$152.33
$137.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
