Availability
Showing In Stock Items. Show All 24 Items.
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$82.45
$41.99
—
$76.45
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 24 )
$49.95
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 260 )
$15.95
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 5 )
$20.00
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
The Right Stuff brake line tees are OE replacements made from brass. Plumb your brake lines with the "right stuff"--The Right Stuff brake line tees.
( 7 )
$16.99
Mcleod offers a variety of adapter fittings to ease in transmission installation. These adapters allow the use of factory disconnect fittings when performing a transmission swap.
( 19 )
$13.75
Summit Bucks
ACDelco automatic transmission oil cooler end fittings are used in the transmission cooling circuit to connect components and lines. They're manufactured to original equipment specifications for accurate fit and performance. The fittings are available in a variety of materials, styles, and sizes. Enjoy the quality, reliability, and durability of factory replacement parts; order the fittings recommended for your vehicle.
( 5 )
$20.99
Dorman offers a line of brake banjo bolts in a range of thread sizes and lengths for various applications. All of their brake hydraulic hose to caliper bolts are constructed from high-quality materials for long-lasting durability. They're conveniently packaged in a variety of piece counts to assist with both small and large projects. Order the Dorman brake banjo bolts designed to fit your application.
( 29 )
$5.99
—
$6.99
These Dorman radiator drain petcocks are designed to empty the coolant from your OEM radiator. They are made of quality materials to ensure reliability and fit. Dorman radiator drain petcocks come in different thread sizes and styles to fit your specific radiator application.
( 29 )
$4.99
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$11.99
On Sale
Earl's Performance adjustable coolant crossover tubes simplify the plumbing of a remote mounted electric water pump by eliminating Ts, Ys, and extra hose ends. The design of these special crossover tubes allows for adjustable length—and for use as a coolant inlet or outlet on your engine. They're constructed from billet aluminum with a black anodized finish.
( 1 )
$279.95
$153.95
Bleed your brake system with these Dorman brake bleeder screws. They're designed to mount into your OEM caliper and will clear all stock components. Available for passenger cars, trucks, and SUVs, the Dorman brake bleeder screws allow for the fast, easy bleeding of your brake system.
( 12 )
$3.99
—
$4.99
Brake bleeding has always been an inconvenient and messy job--until now. Earl's Solo-Bleed bleeder screws will solve both problems. As direct replacements for the OEM bleeder screws, Solo-Bleeds allow you to safely bleed your brakes by yourself without the mess, and without the chance of air inclusion. They come available in many different sizes to fit virtually any vehicle.
( 22 )
$39.22
Earl's Performance remote electric water pump plumbing kits simplify the installation of a remote-mounted electric water pump on your LS Series engine. The special adjustable coolant crossover tubes eliminate tees, Y-blocks, and extra hose ends normally used to make all your connections. The block adapters feature -12 AN O-ring ports for easy maintenance and a leak-free seal. You'll appreciate the simple, clean remote electric water pump plumbing these Earl's Performance kits provide for your LS engine. Kit features, items, and specs include: * Billet aluminum construction with black anodized finish for a great look and corrosion protection * 2 adjustable crossover tubes (fitting centers 6.8 to 10.5 in.) * Block adapters with 1/8 in. NPT ports for connection of the steam tube hose * 2 port fittings * Hardware * Inlet/outlet size: -16 AN male flares * Flexible--inlet/outlets can be on either side of the engine * Overall length 9.8 to 13.5 in. (depending on application)
Not Yet Reviewed
$649.95
Dorman brake hose washers are precision-made replacement washers that ensure a proper fit and seal. Every time you remove your brake hose from your brake caliper, it's recommended that you replace your brake washer. Dorman brake hose washers are rust and corrosion-resistant and provide the best way to prevent leaks through the harshest of road conditions. Dorman offers a comprehensive line of durable brake hose washers in various sizes to meet your needs.
( 3 )
$3.99
—
$10.99
Universal Air Conditioner is a leading supplier of top-quality air conditioning system replacement components for automotive, truck and off-road heavy duty applications. All UAC products are made of high-quality materials to ensure reliable performance and long service life. From compressors to evaporators, thermostatic switches to hose, valve caps, and more, whatever your air conditioning parts and component needs, UAC has got you covered.
( 3 )
$5.99
The Right Stuff brake banjo bolts assist you with brake system maintenance and repairs. These fasteners are made from high-quality materials for long-lasting durability.
( 1 )
$4.99
Derale Performance transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable aluminum, these fittings are corrosion-resistant for a lifetime of good use.
( 44 )
$17.16
Earl's Performance electric water pump block adapters provide options for mounting a pump on a GM LS engine. The three choices available will either mate a big block Chevy pump to the LS engine or provide easy installation of a remote mounted pump. They're made from black anodized billet aluminum and feature -12 AN O-ring female ports and a 1/8 in. NPT port for easy connection of steam tube plumbing. Earl's electric water pump block adapters include a pair of adapters, gaskets, and mounting bolts. Order the kit recommended for your application.
( 1 )
$173.95
—
$199.95
Sunsong offers power steering fittings for thousands of vehicles from the 1950s and up. They're available in a variety of sizes, angles, and configurations. The return line end fittings are designed to OE specs for a factory-style fit. Whether you're repairing a leaky line or updating your power steering, these fittings are effective partners with both high- and low-pressure hoses. Order the model recommended for your application.
( 3 )
$6.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
