Availability
All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.
( 10 )
$257.74
—
$334.98
Off-roaders know that dust is a leading culprit for clogging air cleaners, robbing horsepower, and, when left unchecked, major engine damage. S&B Filters particle separators remove 94 percent of dust before reaching the stock filter. Air is spun as it enters one of 19 vortexes, throwing dust to the outer side of the air tubes. A scavenge fan, rated for 50,000 hours in rough conditions, ejects the dust through the exhaust and pulls clean air to the filter. The S&B particle separator and stock filter reach capacity after 2,536 grams of dust, versus a mere 74 grams with the stock system and filter. The included billet clamps allow these separators to be mounted to most UTV roofs or cages. Play in the sand all day when you're equipped with an S&B Filters particle separator. Order the model designed to fit your machine.
( 3 )
$399.00
—
$499.99
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$419.99
—
$524.99
$369.99
—
$474.99
Mororo intercooler tanks are direct bolt-in replacements for the factory tanks. They feature increased capacity and are manufactured from fabricated aluminum for maximum strength. The tanks also include a billet aluminum filler neck, Moroso racing cap in the stock pressure range, and integral billet aluminum hose fittings.
( 6 )
$444.99
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$419.99
—
$524.99
$369.99
—
$474.99
Keep your UTV's air filter clean and engine protected with S&B Filters Powersports Particle Separators. A UTV's filter can clog quickly, robbing the engine of power. The S&B Powersports Particle Separators are a game changer—allowing UTV owners to maintain horsepower and torque by keeping their air filters cleaner for a much longer period of time. S&B designed this system large enough so that there is no loss in power when used with the factory filter system. By using the same technology military helicopters use to maintain power in extremely dusty conditions, S&B's Powersports Particle Separators remove 94 percent of dust from the airflow before it even reaches the stock filter. This dramatically extends the lifespan of your UTV's air filter, so you can maintain horsepower and torque for a much longer period of time. Don't let the elements get you down. Maintain power throughout you ride ... go further and go faster with the Powersports Particle Separators from S&B Filters! Product features and benefits: * Running the S&B Particle Separator is less restrictive than running without one—there is no loss of horsepower because your filter is not getting bogged down with dirt and debris, resulting in less restriction and maximum airflow * S&B Particle Separator removes 94 percent of dust from the airflow before it reaches your air filter to dramatically extend the life of your filter—this saves you time and money from constantly having to replace your air filter * Clean air is directed to your air filter while the scavenge fan ejects dust through exhaust * Centrifugal force spins the dust against the outer wall—clean air continues forward * S&B Powersports Particle Separator is designed to protect from water, snow, sand and fine dust to maintain power throughout your ride—just what a race-tuned UTV needs to finish faster with more power * Whisper quiet fan technology—when you're at idle or the vehicle's rpm is low, the fan speed is lower allowing you to talk and listen to music without hearing the fan; once you hit the gas, the scavenge fan instantaneously accelerates to provide maximum protection for your filter—it's the best of both worlds! * The Particle Separator's versatile billet clamps allow it to be installed in many positions on either the upper or lower roll bars of your UTV and accommodates most roof configurations * The Particle Separator integrates into the body of UTV Pro XP models for a factory fit and finish while allowing clearance for up to 40 in. tires, so you can say yes to all those other cool accessories while still protecting your engine * When installed on the upper roll bar, the Particle Separator allows your UTV to engulf more air—with this additional airflow, your engine will maintain its highest level of performance in horsepower and fuel economy
Not Yet Reviewed
$499.99
No more changing out your air filter daily, weekly or even monthly, when driving in extreme dusty conditions. By ejecting the dust in the air before it reaches the filter, the S&B Filters Particle Separator allows your air filter to last longer. As you drive, the dusty air enters the fixed vortex tubes that spins the air around and pushes the heavier dust to the outer walls. The S&B Filters Particle Separator replaces the entire stock intake box, tube & air filter. Most installs can be completed in less than 2 hours with no drilling required. It uses the stock filter minder, so you can quickly and accurately determine when your filter needs to be serviced. The quick access latches allow the air filter to be changed in less than 60 seconds without needing any tools.
Not Yet Reviewed
$499.99
Wiseco offers carburetor jet kits for Keihin and Mikuni carburetors to allow tuning after an exhaust or other type of engine modification. These tuning kits will help improve mid-range throttle response and add additional fuel to wide-open throttle running conditions. The kits have multiple jets per size, a wide jet range, and separate kits for either main or pilot jets to provide you with endless tuning capabilities. Whether you're planning to play with your low-end or high-end by jetting your carburetor, Wiseco has the jet kit for you!
Not Yet Reviewed
$282.99
On Sale
Injen SP Series Speed Pro Short Ram intake systems are designed for enthusiasts who demand the very best! These intakes reach down below your front bumper for colder, denser, fresher air—causing stronger, more efficient combustion. They're more than just a cold air conduit; the Speed Pro is a high-tech, fine-tuned oxygen delivery system. The intakes are perfectly designed to fit inside your exact year, make, and model with their TIG-welded brackets and high-quality aluminum tubing, making for a longer lifespan. Injen SP Series systems have unique rubber vibra-mounts, stainless steel clamps, and silicone hoses for a secure, hassle-free installation. Enjoy more horsepower and better acceleration with the value-packed intake fitted for your application.
( 9 )
$377.66
—
$422.60
$302.13
—
$338.08
These V-Force3 reed valve assemblies by Moto Tassinari are the reed valve systems of choice for anyone who's serious about 2-stroke engine performance. The simple premise of the V-Force3 reed valve assemblies is increasing throttle response and engine power throughout the band by increasing surface area, thus improving efficiency. Because the reed petals only need to travel half the distance of those on a conventional reed valve design, there is a greater chance of them being fully opened, as well as a better chance of sealing when they are "closed." Also, the V-Force3 reed valve assemblies generally last longer, as they receive less wear than the reed petals on a conventional reed valve design. You will receive improved performance from an improved design with Moto Tassinari V-Force3 reed valve assemblies.
( 1 )
$319.50
On Sale
The aFe Aries Stage 1 air intake systems are designed to be the most complete intake systems for your UTV. These systems include a one-piece powdercoated housing with a clear coat anodized scoop that increases airflow to your engine. Also included are a scoop filter, crankcase breather filter, and they are available with aFe's Pro Dry S or Pro Guard 7 filters for maximum clean airflow and filtration. The aFe Aries Stage 1 air intake systems will help keep you riding for the long haul!
Not Yet Reviewed
$323.00
$290.70
DeatschWerks powersports fuel injectors combine precision, drop-in fitment, dynamic data, and value to maximize your performance outcome. These high-flow fuel injectors are just one of the many high-quality replacement components that will keep your ride moving forward. DeatschWerks specializes in high-performance EFI fuel system solutions for the automotive aftermarket, as well as powersports applications such as motorcycles and snowmobiles. Order the model recommended for your application needs.
Not Yet Reviewed
$289.00
Boyesen Rage Cages are designed to optimize airflow intake and fuel delivery. They offer instant acceleration and unequaled increases in horsepower and torque through the entire rpm range. Features include: * HP gains arrive sooner, peak higher, and carry longer * No power drop when exhaust valves open * Cast aluminum valve body won't fail or tear like plastic or rubber parts * Dual-stage carbon reeds improve performance and extend reed petal life * Maximum streamlined airflow eliminates turbulence and generates velocity
( 2 )
$274.99
On Sale
Quadboss complete fuel pump modules include all the necessary parts to replace your failed original with the same fit and function. They draw less current than OEM units while maintaining the same flow rate at working pressure to reduce operating temperature and extend the life of the unit.
Not Yet Reviewed
$388.96
$350.06
On Sale
K&N Powersports high-flow cold air intake kits are guaranteed to increase horsepower and come with a million mile limited warranty. These systems replace your vehicle's restrictive factory air filter and air intake housing. They're designed to dramatically reduce intake restriction as they smooth and straighten airflow, which allows your Powersports engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's rpm range. The filters on these kits are washable and reusable.
Not Yet Reviewed
$419.99
—
$524.99
$369.99
—
$474.99
With a goal of changing the marketplace, Excess Injectors intends to create the best tested, matched, and most accurate performance fuel injectors in the world and become the new standard for performance injectors. When you purchase a set of Excess injectors, you also gain access to the Exact Match Data app. This app allows you to unlock the full potential of your injectors by providing access to comprehensive testing and matching data, including data downloads for HP Tuners and more. With over 20 years of experience, they continue to help you build better, faster, more powerful and fuel efficient vehicles. Take your ride's performance to the next level with the Excess Injectors fuel injectors best suited for your application. Product features, items, and specifications include: * Tracking app features over 6,500 measured flow points on each injector * Measurement of flow slope done with 1,200 recorded flow samples * High flow slopes matched within one percent in every set * Dead times matched within two percent in every set * Cloud server access allows you to see how tightly matched your specific set is, flow profiles, and each injector's testing parameters for full disclosure
Not Yet Reviewed
$360.00
—
$420.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
