Availability
Bosch Motorsport electronic throttle bodies (ETBs) are designed to control the fresh air delivery of spark ignition engines in combination with an electronic throttle control (ETC) system. ETB applications with flex-fuel, CNG and LPG are permissible if injected in the air flow after the throttle body. A typical ETC system includes the following components: electronic throttle body, accelerator pedal module, and electronic control unit. Additional features of Bosch Motorsport electronic throttle bodies include: * Many bore diameters available * Opening direction: most are counterclockwise; select ETBs are clockwise * Two redundant sensors control the throttle position * All ETBs have an idle air position * Temperature range: -40 to 284 degrees F (-40 to 140 degrees C) * ETBs can be connected directly to control units with ETC functionality * Supply voltage: 6 to 16 V * Supply voltage sensor: 5 ± 0.2 V * Output signal I: 0 to 5 V for 0 to 90 degrees * Output signal II: 5 to 0 V for 0 to 90 degrees
( 23 )
$199.99
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$154.95
$139.45
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 374 )
$111.99
All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.
( 10 )
$181.74
—
$257.74
On Sale
Go Fast Bits SXV blow-off valves are designed to ensure the ultimate reliability, performance, and boost holding. Featuring a 25mm inlet and outlet, the SXV is the perfect valve to replace the plastic OEM bypass/diverter valve or integrate into a turbo system that didn't previously have a valve. Plastic hose-mounted OEM bypass valves are very common, as are the reliability issues they suffer from cracked plastic and diaphragm failures that result in significant boost loss and poor performance. A significantly leaking OEM valve can also accelerate wear or even damage the turbo from over speeding. These SXV blow-off valves utilizes an uncompromising approach to their design and materials to ensure all your hard-earned boost gets to the engine, so the turbo doesn't work harder than it needs to. Deliver your turbos' full potential with the use of these SXV blow-off valves featured from Go Fast Bits! Product Overview: * Precision CNC-machined components for rugged reliability * Viton piston seal for the ultimate boost holding * The operation of the SXV is designed to offer the best possible throttle * An OEM bypass/diverter valve is open until it needs to close—increases turbo lag * An SXV is closed until it needs to open—minimizes turbo lag * By venting only, when necessary, the SXV eliminates the additional lag imposed by the OEM valve, resulting in the best throttle response your turbo system is capable of delivering. * Switch out your OEM valve for an SXV for the ultimate reliability and throttle response, with the peace of mind of Go Fast Bits lifetime warranty!
Not Yet Reviewed
$171.00
$153.90
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 68 )
$149.00
These Twin Air ATV and motorcycle Power Flow kits are designed to give increased airflow and a positive leak-proof seal at your airbox. These kits have everything you need including a filter cage, air filter element and all necessary hardware.
( 1 )
$106.99
—
$115.99
Wiseco offers carburetor jet kits for Keihin and Mikuni carburetors to allow tuning after an exhaust or other type of engine modification. These tuning kits will help improve mid-range throttle response and add additional fuel to wide-open throttle running conditions. The kits have multiple jets per size, a wide jet range, and separate kits for either main or pilot jets to provide you with endless tuning capabilities. Whether you're planning to play with your low-end or high-end by jetting your carburetor, Wiseco has the jet kit for you!
Not Yet Reviewed
$233.99
—
$282.99
These V-Force3 reed valve assemblies by Moto Tassinari are the reed valve systems of choice for anyone who's serious about 2-stroke engine performance. The simple premise of the V-Force3 reed valve assemblies is increasing throttle response and engine power throughout the band by increasing surface area, thus improving efficiency. Because the reed petals only need to travel half the distance of those on a conventional reed valve design, there is a greater chance of them being fully opened, as well as a better chance of sealing when they are "closed." Also, the V-Force3 reed valve assemblies generally last longer, as they receive less wear than the reed petals on a conventional reed valve design. You will receive improved performance from an improved design with Moto Tassinari V-Force3 reed valve assemblies.
( 1 )
$238.50
On Sale
XDR Performance air intakes contain high-quality components with a custom look, and offer an easy install without any cutting, drilling, or special tuning necessary. Available in two different kits, one features a crosslinked polyethylene (XLPE) tube and the other a silicone tube. Both deliver high-flow, maximum performance, and great style for your Side x Side. Both kits also include a serviceable, high-flow, 8-panel cotton gauze filter for long life and increase airflow, plus a pre-filter wrap to keep the filter clean when used in dusty environments, stainless steel hardware, and black anodized aluminum fittings. And, of course, XDR's Performance air intakes are backed by their Lifetime Limited Warranty.
Not Yet Reviewed
$269.95
$148.95
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 308 )
$125.99
$100.79
Turbosmart internal wastegate actuators provide better turbo response and sensitivity, while managing boost pressure. They're packed with features that make them more convenient and reliable than other wastegate actuators. The Nomex-reinforced silicone diaphragm can withstand high temperatures associated with turbochargers without fear of failure. Their aluminum construction is strong and lightweight, while their stainless steel rod and clevis prevent corrosion under harsh elements. To top off these great little packages, Turbosmart designed a locking collar that allows for quick spring changes. Combine these internal wastegate actuators with Turbosmart's boost controller to really fine-tune your car's potential. Order the universal or application-specific model that best suits your vehicle.
( 6 )
$230.95
Revive your ride with All Balls Racing carburetor rebuild kits. Available for most any motorcycle, dirt bike, ATV, UTV, or snowmobile, their huge selection of kits will contain the components necessary to service your carburetor, restoring performance and reliability. Choose the kit designed for your motorcycle or off-road machine. Important features: * Intended for Closed Course Racing Only * NBR ethanol-resistant rubber material is used on all O-rings and rubber gaskets * High performance interface gasket material is used for all paper gasket applications
( 7 )
$115.80
—
$145.03
Don't settle for anything less than the best. Boyesen Carbon Tech reeds are made from aerospace-grade, 100 percent carbon fiber--meaning they're long lasting and give better performance. They bolt directly to your stock reed cage without modifying anything else on your intake system and are available in different reed petal tensions to suit the track and your riding style. Reed petal tensions: * Low Tensions (LT) improve power delivery in the lower rpm ranges and are best suited for increasing response and initial acceleration * Mid Tensions (MT) improve power delivery in the mid-range and are ideal for increasing the overall power delivery of your engine * High Tensions (HT) improve power delivery in the upper rpm range and increase maximum output.
Not Yet Reviewed
$188.99
These Twin Air Backfire air filters have the same great characteristics as the regular off-road air filters such as improved airflow but also feature a laminated layer of backfire-retardant foam on the inside to help keep the element from being destroyed by a backfire. The choice of more world champions than all other filters combined!
Not Yet Reviewed
$115.99
ZZPerformance air intake kits are a great addition to any build. By removing your stock airbox and installing one of ZZP's air intake kits not only will increase flow but also looks and sounds great. Each kit comes with the necessary components, such as a custom fabricated airbox with intake piping and a ZZP high flow air filter. The air filters are oiled and should be cleaned regularly to maintain performance. Depending on the kit application selected, some air intake kits may also include additional component parts. Select the ZZPerformance air intake kit designed for your application needs.
Not Yet Reviewed
$239.99
On Sale
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$262.99
$212.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
