Availability
Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.
Not Yet Reviewed
$6,039.00
Carefully tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a big block Mopar 440, these PowerPort top-end engine kits save you cash and take the guesswork out of designing a winning engine combo. Each kit is built around a set of dyno-proven PowerPort 240 cylinder heads and includes a Track Max® hydraulic roller camshaft, a Track Heat® intake manifold, 1.6 ratio roller rocker arms with shafts and hold-down bolts, MLS head gaskets, a cylinder head bolt kit, and an intake gasket set with valley pan.
Not Yet Reviewed
$5,377.90
BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a carbureted Chrysler small block-compatible 408 c.i.d. engine with a 727 automatic transmission enabling the production of 465 hp and 494 lb.-ft. of torque with a compression ratio of 10:1. They are offered with a polished or black pulley kit. Select the one you like best. Block: * Hand-picked seasoned Magnum block * Square and parallel decked * Align honed main bearing bore * Cylinders honed within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Mechanical fuel pump provision * 4.040 in. bore * 2-bolt main * 2-piece rear main seal Rotating assembly: * Cast crankshaft * Stroke: 4.000 in. * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Externally balanced front and rear Cylinder heads: * BluePrint Engines assembled and machined Edelbrock casting * Aluminum Magnum-pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners Camshaft: * Roller * .544 in. intake/.541 in. exhaust valve lift * 236 intake/242 exhaust duration at .050 in. of lift * 110 degrees lobe separation angle (LSA) Ignition timing: * 34degrees total at 4,000 rpm 727 transmission: * 10 in. torque converter * 2,200 to 2,600 stall Also included: * Holley 750cfm classic carburetor * Distributor * Thermostat and thermostat housing * Fuel pump and fuel lines * Spark plugs and wires * Harmonic balancer * Valve covers * Timing cover * Air cleaner * Starter * Oil pan * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$16,049.00
—
$16,149.00
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$6,391.95
On Sale
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,504.09
—
$19,504.09
$17,481.07
—
$19,481.07
On Sale
Our Summit Racing™ 1970-74 Challenger and Barracuda Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap headers, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Challenger or Barracuda. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,755.24
—
$19,755.24
$17,689.42
—
$19,689.42
On Sale
Our Summit Racing™ 1966-72 Mopar B-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, and polyurethane transmission mounts, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Mopar B-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,417.29
—
$19,417.29
$17,367.67
—
$19,367.67
Crankshafts are the most critical part of your engine's performance. Crower Standard Series crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. Made of forged 4340 steel for superior performance, they are available with internal and external balance. These crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing but the best, these Crower Standard Series crankshafts are your answer.
Not Yet Reviewed
$6,363.99
Callies Ultra billet crankshafts are intended for use in cutting edge applications where durability and innovation are a must. They are machined from premium grade (Para-Pure) Timken alloy steel formulated to create a level of toughness that is unmatched in the crankshaft industry. Each Ultra billet crankshaft is uniquely machined with Callies' Ultra-Shed counterweight profiles. The Ultra-Shed leading edge profile gently moves oil away from the oncoming counterweight while the directional trailing edge directs oil away from the oncoming rod journal. Callies' Aero-Shed super finish will give you a crankshaft that is totally stress-riser free and incredibly aero efficient. When these processes are combined, the result is a crankshaft with the lowest coefficient of drag in the industry. Callies has developed a wide range of part numbers for a variety of popular engines. Choose the Ultra billet crankshaft created for your engine.
Not Yet Reviewed
$7,543.00
Mopar Performance A-4 aluminum midget race engine blocks are designed to take midget racing to an all-new level. They are manufactured from quality aluminum and include cast iron sleeves, billet steel or billet aluminum main caps, a main cap stud kit, and mounting hardware. The Mopar Performance A-4 aluminum midget race blocks feature an unfinished 4.130 in. bore and are available in 8.40 in. or 9.00 in. deck heights for your specific engine's needs. The engine blocks accept the W9 raised-port aluminum cylinder heads manufactured specifically for sprint or Midget racing. If you're building a midget racing engine, try one of these Mopar Performance A-4 aluminum midget race blocks for a bulletproof combination.
Not Yet Reviewed
$7,139.99
On Sale
Our Summit Racing™ 1973-76 Mopar A-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker components and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Mopar A-Body Gen III Hemi swap headers. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your A-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$18,243.06
—
$20,243.06
$17,832.74
—
$19,832.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
