PLYMOUTH VALIANT | Summit Racing

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.13 out of 5 stars ( 32 )

$1,299.95

—

$1,399.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.36 out of 5 stars ( 11 )

$1,399.95

—

$1,499.95

Holley Sniper 2 EFI Fuel Injection Upgrade Kits

Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.82 out of 5 stars ( 22 )

$1,024.95

—

$1,449.95

American Autowire Classic Update Series Wiring Harness Kits

American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location

4.7 out of 5 stars ( 571 )

$1,165.72

McLeod RXT Street Twin Clutch Kits

McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.69 out of 5 stars ( 48 )

$1,050.00

Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems

Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning

4.09 out of 5 stars ( 56 )

$1,229.95

Quick Fuel Q-Series 4-Barrel Carburetors

Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!

4.72 out of 5 stars ( 47 )

$1,126.95

—

$1,499.95

Holley Sniper EFI Stealth 4150 Fuel Injection Systems

Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.

4.27 out of 5 stars ( 41 )

$1,499.95

Borgeson Power Steering Conversion Kits

Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.

4.33 out of 5 stars ( 138 )

$1,084.45

Quick Fuel SS-Series Carburetors

These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.

4.35 out of 5 stars ( 48 )

$1,024.95

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.2 out of 5 stars ( 173 )

$1,022.50

—

$1,041.50

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.62 out of 5 stars ( 135 )

$1,100.60

—

$1,290.08

Doug's Headers Stainless Steel Headers

Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included

4.21 out of 5 stars ( 34 )

$1,015.18

Wilwood Forged DynaPro 6 Big Brake Front Brake Kits

Wilwood Forged DynaPro 6 Big Brake front brake kits offer enhanced street performance and stopping power for your American muscle and vintage hot rods. Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads. Wilwood Forged DynaPro 6 Big Brake front brake kits will complement your street/strip ride with improved braking capacity, performance, and looks.

4.67 out of 5 stars ( 89 )

$1,440.23

McLeod RXT 1200 Clutch Kits

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

5.0 out of 5 stars ( 12 )

$1,295.00

Doug's Headers

Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 726 )

$1,020.15

—

$1,409.41

Manufacturer Rebate

AutoMeter InVision Digital Gauges

Looking for a sleek, modern alternative to traditional data instruments? AutoMeter InVision digital gauges are the answer. Winner of Best New Interior Product at SEMA, these panels are available as a direct-fit digital dash system or as a universal all-in-one dash for most vehicles. Features include: * 12.3 in. LCD display * Four user selectable displays * High beam and turn signal indicators as well as user selectable warning lights * Adjustable RPM range (8,000 or 10,000) * Odometer with two trip meters * Remote mount joystick for easy programming * 12 or 24 hour clock format * Selectable imperial or metric measurements * Speedometer compatible with OEM, square wave or sine wave sending units * Tachometer compatible with single-cylinder to 12-cylinder engines * Adjustable brightness

4.48 out of 5 stars ( 23 )

$1,126.99

On Sale

Flowmaster Stainless Steel American Thunder Exhaust Systems

Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.

4.4 out of 5 stars ( 307 )

$1,229.95

Wilwood Forged Dynalite Pro Series Front Disc Brake Kits

Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.

4.58 out of 5 stars ( 201 )

$1,057.29

—

$1,225.11

Wilwood Dynalite Pro Series Front Disc Brake Kits with SRP Rotors

Wilwood's Dynalite Pro series front disc brake kits with SRP rotors are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite forged-billet, 4-piston calipers with the added performance and cooling capacity of competition-style, vented, iron-alloy rotors. Other features include aluminum-alloy brake hats where applicable, Polymatrix brake pads, aluminum caliper brackets, Grade 8 mounting hardware, and detailed installation instructions for an easy bolt-on installation. In addition to all this, these kits can also cut as much as 35 lbs. off of your front-end.

5.0 out of 5 stars ( 4 )

$1,194.79

Wilwood Forged Dynalite Pro Series Rear Disc Brake Kits

Wilwood Forged Dynalite Pro Series rear brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. FDL Pro Series rear kits package Wilwood's Forged billet Dynalite 4-piston calipers, 2-piece hat and rotor assemblies, and high-friction pads for optimized and balanced braking for all types of off-road, competition, and other customized applications. The Dynalite calipers can be optioned with a full range of finishes to reflect your personalized style, and the rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high-heat competition.

4.63 out of 5 stars ( 19 )

$1,083.63

Flaming River Tilt Floor Shift Steering Columns

Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.

3.95 out of 5 stars ( 111 )

$1,147.99

—

$1,284.99

Wilwood D154 Rear Parking Brake Kits

Wilwood D154 rear parking brake kits provide high performance stopping power for musclecars with rear axles that require a parking brake! Featuring forged D154 dual-piston calipers, 12.19 in. one-piece drum and rotors, and high-friction pads, these kits nicely complement your D52 or D154 calipers on OE spindles. Their neatly hidden internal shoe system allows for a clean installation and superior static holding power for parking. Optional caliper finishes and rotor designs let you customize the look and performance of your brakes. Wilwood D154 rear parking brake kits offer balanced, optimized braking for all types of custom performance street/strip and show machines!

4.27 out of 5 stars ( 11 )

$1,124.94

Griffin Exact Fit Radiator Combos

Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.

4.02 out of 5 stars ( 95 )

$1,376.00

PLYMOUTH VALIANT Parts and Accessories