Availability
Borgeson Mopar power steering conversion boxes provide modern steering power with Borgeson precision. Their conversion boxes bolt to the stock mounting location and connect to the original pitman arm. Easily convert your manual steering, or upgrade your present steering, with no bump steer or loss of turning radius. Make your classic Mopar drive like it should with Borgeson Mopar power steering conversion boxes.
( 54 )
$594.41
Upgrade from stamped steel and rubber bushings with QA1 Mopar control arms. QA1 arms are stronger and lighter than the stock control arms. They are constructed of powdercoated steel and fitted with stiffer bushings for better handling and response. Improve the performance of your performance car with QA1 control arms.
( 99 )
$625.91
Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers
( 27 )
$599.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$699.95
$557.95
—
$678.95
They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.
( 421 )
$507.99
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$826.95
$695.95
—
$743.95
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 192 )
$641.54
—
$691.54
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 115 )
$517.99
Classic Performance 1963-74 Mopar disc brake kits will give your muscle Mopar better stopping power you need. These kits include everything you need to give your classic Mopar the stopping power of a modern car, making every cruise or pass down the strip more fun. Classic Performance assembled top quality parts into each kit, making installation as simple as possible. Bring your braking into modern times with Classic Performance 1963-74 Mopar disc brake kits.
( 30 )
$718.99
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$599.84
—
$742.49
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$525.95
—
$579.95
Rusted-out floor pans aren't just unsightly--they are unsafe! Auto Metal Direct offers top-quality replacement floor pans for many classic applications. These quality steel front floor pans are meticulously crafted just like the originals, with the correct dimensions for accurate coverage and fit and then EDP coated for durability and rust resistance. Auto Metal Direct front floor pans are available in full and patch styles. Necessary fasteners and brackets are included, depending on the application.
( 53 )
$544.50
On Sale
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$799.95
$628.95
—
$718.95
Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.
( 44 )
$614.46
—
$619.95
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$727.30
—
$733.65
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 366 )
$519.89
—
$696.91
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$592.95
—
$716.95
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$537.93
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 44 )
$500.17
—
$636.13
Auto Metal Direct makes heavy-gauge steel rails designed to fit perfect and weld-in easily since they are superior reproductions of the factory original. Frame rails can become weakened by rust, attempts at pushing or towing, or damaged due to an accident, which can adversely affect other chassis components and make your vehicle unsafe to drive. Don't compromise your vehicle—or safety—with cheap replacement parts. For quality parts and components that you need for your classic vehicle, trust the pros at AMD.
( 3 )
$582.99
—
$593.99
Auto Metal Direct upper cowl panels are high-quality replacements for your rusty or damaged original. Made from premium, heavy-gauge stamped steel with a black EDP coating, they're designed to resist corrosion and provide your ride with durability for the long haul. Order the model tailored for fitment on your vehicle application.
( 9 )
$582.99
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2465 )
$519.99
—
$734.99
Milodon Gen III Hemi Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your specific application.
( 4 )
$579.95
—
$649.95
Summit Racing™ Performance Fit combos feature a quality aluminum radiator and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. These combos also include an electric fan, fan shroud, and mounting hardware. Modifications may be required when installing Summit Racing™ Performance Fit radiators.
( 76 )
$541.96
—
$684.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
