Availability
Showing In Stock Items. Show All 106 Items.
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 163 )
$255.00
—
$415.00
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$389.95
—
$449.95
$350.95
—
$403.95
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
$493.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$340.95
$306.85
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$325.00
—
$395.00
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
$449.95
—
$515.95
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$531.95
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$439.99
—
$490.99
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$543.95
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 135 )
$309.00
—
$359.00
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 135 )
$386.40
—
$483.93
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$346.95
—
$650.95
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$388.95
—
$397.95
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$325.95
—
$335.95
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 61 )
$346.95
—
$493.95
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$293.95
—
$377.95
The Wheel precision-machined flexplates from J.W. Performance feature double-welded, high-quality ring gear and the highest quality steel centers. They are designed to take the punishment of today's high-horsepower revving motors from street to ProMod applications. All of J.W.'s flexplates are SFI-certified and have a replaceable ring gear. They're available in a heavyweight style for quicker launches and more rpm during the shift, or in a lightweight style for faster turbo spool time and improved engine response in street, Circle Track, and road race applications.
( 33 )
$395.12
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$577.95
Pacific Performance Engineering heavy-duty transmission pans do more than hold oil--they cool and protect! They have thick cast construction from high-grade aluminum alloy. Thanks to internal and/or external cooling fins and robust side ribs, PPE transmission pans are much stronger and they allow fluid to run much cooler. Lastly, they feature an insanely strong Neodymium magnet-equipped stainless steel drain plug that attracts and holds harmful metal particles floating in your oil. Really, your pan just holds the oil? It's time for a change--upgrade to cooler Pacific Performance Engineering heavy-duty transmission pans.
( 36 )
$305.99
—
$323.99
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$371.52
—
$449.50
Reid Racing bellhousings are cast from high-strength 6061 T-6 aluminum and are heat-treated for additional toughness. These bellhousings pass stringent SFI 30.1 certification and are approved with no external shields required. The bellhousings feature an open bottom for easy converter access, a reduced diameter for better floorboard clearance, and a contoured mounting flange to properly match the rear of the engine block. No special flexplate is required. They are available for the Reid Racing Superglide and Super Hydra 400 transmissions.
( 8 )
$499.00
PRW billet steel flywheels are CAD-engineered, and precision CNC-machined from 1045 billet steel. Purpose built to handle extreme-duty applications and the punishment of high-horsepower engines, they are balanced and carefully inspected throughout the manufacturing process to ensure you receive the quality you expect from PRW. These billet steel flywheels feature removable counterweights for versatility and are SFI-certified.
( 7 )
$353.13
—
$430.53
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$399.00
—
$425.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
