Availability
Showing In Stock Items. Show All 45 Items.
On Sale
Yukon Gear & Axle C-clips keep a secure hold on your axle. These little steel C-clips are mighty important, so they're precision-crafted to stay in the groove and prevent your shaft from sliding out. The replacement clips are available for fitment on more than a dozen axle models. Trust Yukon C-clips for differential maintenance.
( 48 )
$11.89
—
$15.99
$10.11
—
$12.99
On Sale
Question: Can you run regular gear and axle oil with a limited-slip? You could answer "No" and be correct—or you could say, "Yes, but you'll need to add Yukon Gear & Axle friction modifiers." Clutch-type limited-slips can be as chatty as a room full of lawyers, and just as dangerous. When added to gear oil, this modifier helps the clutches and improves differential noise while extending life. Limited-slips have a lot of moving parts; keep them in shape with Yukon Gear & Axle friction modifiers.
( 20 )
$20.89
$17.76
On Sale
These magnetic oil drain plugs from Mr. Gasket accumulate metal particles found in the oil, preventing possible damage to the engine. Best of all, they're not only quality-made, they're totally affordable protection for your investment!
( 26 )
$17.60
$15.84
On Sale
Shafer's Classic Reproductions inner dipstick tubes are direct replacement parts for your classic ride. Constructed to match original design and finish, these inner dipstick tubes will keep your classic ride on the road. Add that finishing restoration touch with Shafer's Classic Reproductions inner dipstick tubes.
( 3 )
$14.99
$13.49
On Sale
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.05
$18.95
On Sale
These fuel pump mounting plates mount behind your mechanical fuel pump for carbureted small block Chevy V8 and 90 degree V6 engines. They add a touch of shine to the area behind your fuel pump, and even come with a gasket.
( 10 )
$18.31
$16.48
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$11.44
$10.30
On Sale
Mr. Gasket transmission dipsticks complement your engine compartment with beautiful chrome. These steel dipsticks are available in one-piece designs with attached mounting tab, and in 2-piece designs with separate bellhousing mounts. Choose the model designed for your transmission application. Your Mr. Gasket dipstick may include: * Dipstick * Chrome plated steel tube * O-ring * Separate bellhousing mounting tab
( 6 )
$32.04
$20.83
On Sale
ACCEL C-Cut Performance spark plugs ignite a better path to high performance for both street and strip applications. Their ground strap aligns with the centerline of the electrode to create a much-improved electrical pathway. This design reduces quenching, shrouding, and obstruction, allowing a hotter, larger flame, better firing energy, and a complete burn. Unshroud the spark to ignite your vehicle's performance; order the ACCEL C-Cut Performance spark plugs designed to fit your engine. More product features include: * Greater fuel efficiency, reduced emissions, increased performance, and better throttle response * Helps eliminate misfiring, rough idle, and overall poor performance * Copper core outperforms iridium and platinum * Machine-rolled threads protect your valuable cylinder heads * Sizes and sets available for thousands of applications
( 396 )
$23.65
$21.29
On Sale
Yukon Gear & Axle Mighty axle seals use the latest designs and manufacturing technologies to produce a precision fit, tight seal, and long life. Maybe your old seals are starting to wear or maybe you're replacing axles—both are a good time for new seals. Whatever the reason, order the Mighty seals from Yukon Gear & Axle designed to fit your application.
( 36 )
$11.89
—
$16.99
$10.11
—
$14.44
On Sale
Yukon Gear & Axle offers pinion seals for a variety of specific axles, including Ford, GM, and Dana applications. These replacements are constructed from durable steel with inner rubber, ensuring a precision fit and tight seal. For differential components used on the track, the street, or the hills—drivers depend on the expertise of Team Yukon! Order the pinion seals designed to fit your application.
( 24 )
$11.89
—
$13.99
$10.11
—
$10.99
On Sale
Yukon Gear & Axle differential cover gaskets are economical cork replacements that ensure a leak-proof seal. These rear-end gaskets have application-specific designs to service a variety of axle models and differential case designs. The right fit for unsurpassed performance.
( 21 )
$12.99
—
$16.89
$11.04
—
$14.36
On Sale
The zinc plated smaller-than-standard hex heads on Mr. Gasket self-locking oil pan bolt kits are ideal for tight spaces. The flange head designs keep the bolt from falling into the socket. Special serrations prevent loosening, and the flange gives uniform clamping pressure.
( 5 )
$20.11
$18.10
On Sale
Even the smallest parts are important. Yukon Gear & Axle differential pinion nuts are quality steel fasteners that are ready to help you set the proper preload. They're offered in a variety of styles, sizes, and finishes to fit dozens of axle models.
( 20 )
$11.99
$10.19
On Sale
PerTronix vacuum advance lockouts are designed to eliminate the vacuum advance and remove the vacuum advance chamber from PerTronix distributors. Made of steel, they're available for both clockwise and counterclockwise rotation distributors. Installation is simple; no other modifications are required.
( 3 )
$11.85
$10.66
On Sale
Installing headers can sometimes be a real pain, due to the tight spaces and the location and shape of the tubes. Mr. Gasket can help make installation a little easier and also help prevent annoying exhaust leaks from under-tightened header bolts. They have both the socket-head and hex-head styles of header bolts available. Hex types are heat-treated Grade 5 steel and have smaller-than-standard heads to ease access in tight spaces. Socket-head bolts are made from stronger Grade 8 steel for added ruggedness and they're great for those really difficult-to-reach spots. Both styles have a protective black oxide finish.
( 45 )
$18.86
$16.97
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$18.34
$16.51
On Sale
Shafer's Classic fuel filter assemblies feature glass bowls just like the originals. Some of these replacements even have the AC stamped on the glass. Repair and restore your classic's fuel system with the authentic appeal and performance of Shafer's Classic Reproductions fuel filter assemblies. Order the model designed for fitment with your vehicle application.
( 11 )
$14.99
$13.49
On Sale
Yukon Gear & Axle Super carrier shims come in handy when setting up your new ring and pinion or carrier. A variety of steel shims is included in the kits. Order the kit designed for fitment with your axle model—then set just the right amount of play between your gears.
( 58 )
$18.89
$16.06
On Sale
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$27.99
$23.79
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 15 )
$17.25
$15.52
On Sale
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 43 )
$16.40
$10.66
On Sale
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$14.99
—
$17.99
$11.99
—
$15.29
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$17.60
$15.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
