Availability
Showing In Stock Items. Show All 59 Items.
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$66.99
—
$108.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$67.99
—
$85.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$88.31
—
$112.40
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 965 )
$97.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 317 )
$61.99
—
$109.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 67 )
$82.99
—
$109.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$76.99
—
$92.99
Edelbrock's Signature series chrome valve covers are engineered for function and styled for good looks. They're triple chrome plated for long lasting good looks and have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 157 )
$87.95
Hayden oil filter relocation kits allow you to relocate your oil filter to a more accessible location, such as in the engine compartment. Hayden manufactures these oil filter relocation kits out of quality materials to ensure performance and durability. Additional oil capacity helps cool internal engine parts providing maximum engine protection.
( 20 )
$82.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 311 )
$88.99
—
$106.99
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 171 )
$102.95
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 97 )
$71.99
—
$113.99
Aeroquip quick-drain oil pan couplings are great for street rides, hot rods, race cars, or anything else that you need to cleanly drain fluid from efficiently. They eliminate the potential for spillage by draining directly into a waste container and make changing your oil quick, clean, and fun.
( 11 )
$72.99
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$102.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 229 )
$69.99
—
$99.99
King CP-Series rod bearings are premium OEM replacement bearings designed from copper-lead on steel with a .001 in. copper-lead tin over-plate. These quality OEM rod bearings are temperature-resistant with a high-load capacity to provide dependable engine performance. From quick repairs to full engine rebuilds, you can count on King Engine Bearings.
( 3 )
$52.99
—
$75.99
OER offers timing covers for a variety of applications, including many Chevy, Cadillac, Oldsmobile, and Pontiac cars from the 1960s, '70s, '80s, and '90s. These reproduction front crankcase or timing covers are designed for a variety of 1964-79 GM models equipped with Olds 307, 330, 350, 403, 400, 425, or 455 V8 engines—including the popular 1977-80 Firebird and Trans Am 403 cu. in. equipped models and the 1986-90 Cadillac Brougham, Chevy Caprice Classic, Pontiac Parisienne, and Safari with the 307 cu. in. Olds engine. These stock-style replacement front timing cover plates replace the original GM units which tend to rust out where the water pump bolts are located. This part should be replaced whenever corrosion is present.
( 1 )
$67.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$59.99
—
$86.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$62.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$94.99
Melling oil pump rebuild kits include everything that you need for a quality rebuild to keep your Melling oil pump properly operating. When it comes time to service your oil pump, you can count on Melling having the correct components for a job done right.
( 38 )
$50.99
—
$66.99
Single and dual remote Perma-Cool oil filter relocation kits enable you to position your oil filter where you want it for more convenient oil changes and increased engine oil capacity. The complete kits include everything needed for an easy installation: A spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded, Ford-type spin-on oil filters (not included), and come with an assortment of adapters to attach the oil filter bracket to almost any engine. Relocation kits are available in universal and application-specific models.
( 60 )
$70.41
—
$92.43
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$68.99
—
$89.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
