Availability
Showing In Stock Items. Show All 111 Items.
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$329.95
—
$549.95
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.62
—
$163.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$399.95
—
$949.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 369 )
$130.95
—
$299.95
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$899.95
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.
( 463 )
$76.95
—
$166.95
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$155.99
—
$172.99
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 229 )
$365.00
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 373 )
$134.99
—
$140.99
Lokar Midnight Series stainless steel Hi-Tech kickdown kits have PTFE-lined cables, which are made with an extruded liner for extended life. They feature black anodized aluminum fittings and ferrules to eliminate frayed ends and a black stainless steel braided cable jacket. The kits are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the model recommended for your transmission application.
( 37 )
$142.95
—
$161.95
Summit Racing™ adjustable clutch fork pivot balls allow for additional adjustment of the clutch fork height when the clutch assembly is changed. By utilizing a select combination of base metals and heat treat processes, they provide twice the surface hardness, twice the surface lubricity, and several times the corrosion resistance of OEM and similar aftermarket pivot balls. Available for passenger cars, trucks and SUVs, Summit Racing™ adjustable clutch fork pivot balls provide the proper adjustment for your clutch fork geometry. Designed for use with aftermarket clutch bellhousings only.
( 33 )
$19.99
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$475.95
—
$570.95
Zoom 30000 Series clutches are designed for 60s and 70s American muscle cars. These sets include higher clamp load Zoom assemblies and organic clutch discs (except where noted) with high burst strength organic facings. They also come complete with release bearing, pilot bearing/bushing, and alignment tool. Features include: * 20 to 60 percent increase in torque capacity over a stock clutch * Complete 5 piece sets include everything needed to do the job right * Premium, high burst strength organic facings * Higher clamp load cover assemblies with Zoom anti-rust finish * Specifically for '60s and '70s American muscle cars with mechanical linkages
( 51 )
$166.99
—
$223.99
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 88 )
$87.15
—
$132.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$251.95
Pioneer offers transmission fluid dipsticks for a wide range of applications. These replacements are OE-style equipment for precise fit, form, and function.
( 7 )
$93.99
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
PRW billet steel flywheels are CAD-engineered, and precision CNC-machined from 1045 billet steel. Purpose built to handle extreme-duty applications and the punishment of high-horsepower engines, they are balanced and carefully inspected throughout the manufacturing process to ensure you receive the quality you expect from PRW. These billet steel flywheels feature removable counterweights for versatility and are SFI-certified.
( 7 )
$338.38
TCI steel transmission pans are the perfect replacement for performance and appearance beneath your vehicle. These steel reservoirs are thicker than stock for longevity, and some models are beautifully chrome plated to further prevent rust—in addition to including a drain plug to facilitate fluid maintenance. Over time, many transmission pans develop a warped, leaky gasket flange, or become damaged by road debris. Protect your transmission by bolting on one of these economical replacement upgrades from TCI.
( 67 )
$83.95
On Sale
Lakewood clutch fork pivot balls allow for additional adjustment of the clutch fork height when the clutch assembly is changed. Lakewood recommends these for all of their bellhousings.
( 19 )
$52.75
Replacing your clutch? Pioneer clutch pilot bushings will help you complete the task properly. Their broad selection of OEM replacement bushings are manufactured of 60 percent bronze and 40 percent cast iron to meet OE specifications for size and physical properties. Each bushing is oil-impregnated for long life (applicable models). Heavy-duty pilot bushings and bearings are recommended for performance applications. Pioneer performance pilot bushings are manufactured from 100 percent bronze material to reduce problems caused by heat build-up. Pioneer roller pilot bearings are direct replacements for OEM bronze bushings and use needle bearing sleeves to reduce friction and heat, providing quicker and smoother shifts. They may be small but they play a big role in maintaining your transmission and clutch operation. Guide your clutch to smooth shifts and efficient performance with Pioneer clutch pilot bushings.
( 13 )
$13.99
—
$18.99
Replace your old flywheel/torque converter inspection cover with Mr. Gasket inspection covers. They are designed to fit most Chevrolet applications, these covers are made from beautifully chrome plated heavy-gauge steel. These covers are corrosion resistant and facilitate easy installation.
( 7 )
$69.35
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$699.95
—
$1,049.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
