Availability
Showing In Stock Items. Show All 81 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$38.99
—
$49.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$63.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$11.99
—
$22.99
Make your stops shorter with new flex brake lines from The Right Stuff. Their flex lines are quality-made hoses featuring single-crimp/swage fittings. They come available in several front and rear applications, so choose the lines that will get the job done right the first time--flex brake hoses from The Right Stuff.
( 111 )
$16.99
—
$46.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$35.99
—
$66.99
The Stop Shop PCV valve hoses are the correct molded pieces to restore and repair your classic. They have the proper bends and include hose clamps to provide the fit and function that matches that of the originals they are replacing.
( 2 )
$32.79
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 162 )
$13.99
—
$25.99
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$36.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$14.99
—
$35.99
These Global West Suspension brake line kits are made from durable braided stainless steel hose and are produced for many popular musclecars. Kits are available for both stock and aftermarket caliper combinations.
( 13 )
$81.94
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 657 )
$33.99
—
$196.99
When, it's time to move brake maintenance to the "do" list, Centric brake hoses will help keep you riding safely. The very last thing you want in your "wait till it breaks" project list is your brake lines. If your brakes are feeling even the slightest bit spongy or it's just time to replace them, find your make and model match with Centric brake hoses.
( 45 )
$9.99
—
$44.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 54 )
$14.99
—
$42.99
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 34 )
$118.99
—
$148.99
RESTOPARTS® windshield washer hoses will put your little squirts to work! Perfect for all restorations, these kits include reproduction hoses, a filter, and straps for installation. The hoses run from the jar to the pump on your setup. Keep the fluid flowing for a clear view—choose RESTOPARTS® windshield washer hoses for your classic vehicle.
( 9 )
$26.79
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 288 )
$9.99
—
$18.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$19.99
—
$41.99
The Stop Shop offers CNC-bent front brake lines that are exact factory replacements on specific vehicles, which uses the original proportioning valve and bracket. Simply remove all original rusty lines and put the new tubes in place. The brake lines are available in 304 stainless and Galfan coated steel tubing. Tube nuts are made from steel, plated for corrosion resistance; and the fittings and tube size will match factory tubes. Spring guards to protect the tubing will be in factory positions (if stock tubes had spring guards). Order the front brake lines recommended for your vehicle.
( 6 )
$54.99
—
$64.99
Raybestos Element3 hydraulic brake hoses meet federal standards to ensure performance and safety in your vehicles. These replacement lines provide exceptional durability and a longer life over competitors' hoses. Element3 hydraulic brake hoses utilize premium fittings to ensure a good seal and ease of installation. Over 1,400 models are available to service vehicles from the 1940s and up. Order the hoses recommended for your application.
( 28 )
$11.99
—
$45.99
RESTOPARTS® Supplied overflow radiator hoses are original-style replacements for your classic. Featuring authentic factory markings, the thin-wall black rubber hoses have a 3/8 in. inside diameter and are ready for installation in your engine compartment. They're designed for over a thousand applications from the 1950s and up.
( 4 )
$24.99
ACDelco Gold brake hydraulic hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each hose contains double crimped fittings to provide longer service life and durability. These Gold brake hydraulic hoses are high-quality replacement components for your vehicle's braking system. Order the model recommended for your application.
( 27 )
$8.99
—
$32.99
Are you tired of having leaks in your transmission lines? The Right Stuff transmission cooler lines are manufactured from quality materials to ensure performance and dependability.
( 347 )
$60.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 56 )
$6.99
—
$45.99
Edelmann power steering lines follow OE design to ensure you easy installation. These end fittings are available in various sizes and angles to complete most repairs. For power steering maintenance or upgrades, choose the fit and function backed by years of experience—Edelmann.
( 7 )
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
