Availability
Showing In Stock Items. Show All 54 Items.
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
$112.64
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
$167.08
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 353 )
$161.95
$121.95
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$144.25
$129.82
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$199.95
—
$210.95
$129.95
—
$158.95
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$179.30
$161.37
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$190.95
$171.86
On Sale
Maradyne Mach One series electric fans feature a quiet, reversible 225 W motor, so they can be used as a puller or pusher, depending on your space constraints. They have a glass-filled nylon shroud and blade and are high-temperature and impact-resistant for harsh underhood temperatures and greater resistance to flying road debris.
( 1 )
$285.53
$256.98
On Sale
Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter
( 25 )
$299.95
$164.95
On Sale
PRW High Performance Sportsman harmonic dampers are cast from nodular iron, and are suitable for engines generating up to 400 hp. Unlike most OEM dampers, the hub and ring are splined to prevent radial movement of the outer ring. These dampers are 30 percent stronger than OEM dampers made from gray iron. With the combination of top-quality and affordability, these PWR dampers really raise the bar in the high performance industry. Features and specs include: * Ideal for street rebuilds * Accurate crank bore for a proper pressed-fit * Externally balanced dampers include removable counterweights * Available in black with laser-etched timing marks * Not SFI-certified
( 37 )
$135.14
$114.87
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
PRW SFI-rated racing dampers are perfect for the weekend warrior or the all-out racer! Many features have been added to broaden the spectrum of fitment and adaptability. The inner hub and outer ring are manufactured from high-quality billet steel forgings, with heated elastomer injected between the two components parts. Their inner and outer grooved ridgelines further secure the inner hubs to the outer rings. PRW dampers are available in a black epoxy or polished steel with an epoxy clearcoat, and meet SFI 18.1 specifications. Features and specs include: * Manufactured from high-grade billet carbon steel forgings * Accurate crank bore for proper pressed-fit * Easy-to-read laser engraved timing marks * Externally balanced dampers include removable counterweights
( 15 )
$208.51
—
$245.06
$177.23
—
$208.30
On Sale
Voxx B/G Rod Works Old School chrome wheels are designed with clean, traditional hot rod style, perfect for resto-mod applications. The timeless 5-spoke look finished with bright, shiny chrome fits most modern brake upgrades, while accommodating original equipment backspacing. Voxx one-piece cast aluminum construction offers better durability and weight savings over traditional steel alternatives.
( 13 )
$252.99
$227.99
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$207.95
—
$259.95
$155.95
—
$171.95
On Sale
Shiftworks shifter conversion kits offer shifter solutions for a variety of make/model vehicles. If you've tried to use your factory-installed console or automatic floor shifter when swapping out your old transmission, you soon realize that it doesn't fit. But, with Shiftworks kits, they will. These assemblies have what you need to keep your classic ride looking original and shifting with modern performance. Whether you're replacing your Powerglide or upgrading to an overdrive transmission, your favorite factory shifter will still be there—and working great—thanks to Shiftworks shifter conversion kits.
( 72 )
$257.99
$232.19
On Sale
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 100 Classic Series chrome wheels. They'll amp up your ride's aesthetics with some old-school charm in a classic 5-spoke design that is sure to look great on both old and new muscle cars! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series chrome rims designed to fit your application!
( 2 )
$299.95
$164.95
On Sale
Add some aluminum to your engine compartment with these Mr. Gasket diecast aluminum valve covers. They feature precision diecast aluminum construction for an exact fit. Their extended sealing lips positively locate and secure the gasket and prevent it from moving under pressure, eliminating oil leaks. The covers have a high-luster polished finish, and include a 1 1/4 in. breather hole, unless otherwise noted. They come in ball-milled or plain top models; the plain tops are a full .125 in. thick to enable custom milling or engraving.
( 2 )
$195.75
$107.95
On Sale
Taking a fresh approach to the classic mesh design, Raceline Wheels 147B Intake gloss black wheels offer a Rally-inspired multi-spoke design constructed of heavy-duty A356 aluminum. Available in different diameters and fitment specs, the Intake features a concave bowl design finished in black and fitted with a snap-in cap with debossed Raceline logo. These wheels pass or exceed all DOT standard load ratings. Choose a set for your ride.
Not Yet Reviewed
$165.00
$148.50
On Sale
These factory muscle camshafts are reproduced from the factory specs and made to COMP Camps' strict tolerances. Available in several styles, these cams keep that stock fit and great sound and combine it with COMPS Cams' incredible performance.
( 16 )
$258.95
$207.16
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
$108.95
On Sale
Agility Auto Parts offers a complete line of automotive condensers covering most of North American vehicle applications. These certified components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every APDI air conditioning condenser is 100 percent leak-tested for trouble-free operation!
( 8 )
$145.99
—
$155.99
$131.39
—
$140.39
On Sale
The Touren TR22 embodies all the principles that Touren seeks to imbue in their wheels, including top tier quality, construction, performance, and aesthetics. Glossy, sleek, and upfront, the TR22 Hypersilver wheels feature an elegant split spoke design—each spoke extends to the outer lip to exaggerate the rims overall size. A Touren branded center cap is also included with each wheel to complete the look. With a one-piece cast aluminum alloy construction for strength and weight savings, these wheels will perfectly convey your discriminating taste and sense of style. Elevate the look of your vehicle's build with the TR22 Hypersilver wheels from Touren.
Not Yet Reviewed
$167.99
$155.99
On Sale
Voxx B/G Rod Works Rally silver machined wheels are clean, traditional, and perfect for your restoration hot rod. The ageless 5-slot design is featured in one-piece cast aluminum construction, and finished in silver with a contrasting machined lip. B/G Rod Works Rally wheels fit most modern brake upgrades, while accommodating original equipment backspacing, and offers better durability and weight savings over traditional steel alternatives. Voxx wheels are available in a selection of sizes to fit many applications.
( 5 )
$200.99
—
$214.99
$175.99
—
$189.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
