Availability
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
$112.64
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
$167.08
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 28 )
$619.79
—
$913.79
$579.79
—
$873.79
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$144.25
$129.82
On Sale
Maradyne Mach Two series truck electric fans feature dual 225 W high performance IP68 sealed motors attached to dual 11 in. diameter 5-blade fans to put out over 2,500 cfm of airflow. They have all glass-filled nylon construction and include dual harnesses for an easier installation. The fans are available with different mounting bracket positions, so you can match up with your radiator mounting style.
( 16 )
$372.01
—
$372.93
$334.81
—
$335.64
On Sale
Shiftworks automatic transmission shifter cables are the next best thing after the originals. They are flexible, adjustable, and feature stainless with a non-booted modern dry sweep design. They also offer well over 2 in. of travel for proper shifting into all gears and are available in a choice of lengths. Costing less than the originals, but just as good, Shiftworks automatic transmission shifter cables get you in gear for performance at the right price.
( 54 )
$104.99
$94.49
On Sale
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$188.00
$169.20
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 22 )
$500.79
—
$827.79
$460.79
—
$787.79
On Sale
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
Not Yet Reviewed
$699.89
$499.95
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$79.55
$71.60
On Sale
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 235 )
$29.11
$21.83
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 703 )
$622.25
—
$1,131.55
$560.02
—
$1,018.40
On Sale
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 23 )
$1,044.55
$940.10
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 648 )
$101.85
$91.66
On Sale
Fluidyne high performance radiators feature aluminum end tanks and 100 percent NOCOLOK brazed aluminum cores, rather than the epoxy-bonded types used by others. These cores are built using high-efficiency cooling fins that deliver maximum performance and durability. The radiators are offered in universal sizes, as well as exact fit, with all brackets, fittings, and hoses set up to match the original equipment layout for easy installation—and they meet ISO 9001 standards for quality. Fluidyne radiators are available in crossflow and downflow styles, and a range of sizes for vehicle-specific applications; some models also include a transmission cooler. Keep your ride cool on the hottest days or at the track with a Fluidyne radiator.
( 31 )
$437.88
—
$468.18
$350.30
—
$374.54
On Sale
PerTronix's Flame-Thrower Street/Strip HEI distributors will produce 67 percent more energy in the coil, and deliver twice the energy across the spark gap. Plus, they deliver misfire-free performance up to a minimum of 7,500 rpm, a 3,000 rpm improvement over most original HEIs. Each distributor uses a new aluminum housing, cast and machined from a strong but lightweight A384 alloy. High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use. Features include an adjustable vacuum advance, a high-performance mechanical curve kit, aluminum housing, a high dielectric strength cap with solid brass terminals, a balanced rotor, and a centerless-ground shaft.
( 49 )
$355.95
$320.36
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
—
$65.89
$34.49
—
$49.42
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$190.95
$171.86
On Sale
Patriot cast iron manifolds designed for GM LS engines offer a wide variety of fitment applications maximizing engine bay clearance. They also incorporate a sealing dome and ships with a pair of 304 series stainless steel reducers to help route your exhaust system with more adjustment options than the competition--no more expensive GM gaskets needed to get you on the road. Patriot cast iron manifolds will fit many of their LS engine swaps. Finishes offered for Patriot cast iron manifolds: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw cast is available for individual customizing
( 15 )
$348.50
—
$492.80
$313.65
—
$443.52
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 133 )
$68.99
$51.74
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 444 )
$62.90
$56.61
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.
( 22 )
$355.95
—
$383.00
$320.36
—
$344.70
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
