Availability
Summit Bucks
ACDelco air conditioning compressors are an ideal choice for a custom hot rod project or standard OEM replacement. They're available in new or cost-alternative remanufactured units for fitment on a wide range of applications. The heart of any air conditioning system is the compressor—their primary function is to compress and transfer refrigerant gas. The intake side draws in refrigerant gas from the outlet of the evaporator. Once condensed to a gas, it's then discharged to the condenser, where it can transfer the heat that is absorbed from the inside of the vehicle.
( 91 )
$117.99
—
$237.99
On Sale
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$135.23
—
$177.43
$121.71
—
$159.69
FlowKooler Hi-Flow mechanical water pumps resolve low-speed heating problems by doubling flow rates at low rpm and idle. CNC precision-machined impellers feature larger diameters, increased vane count, tighter clearances, shrouding, and porting. These unique design features help drop engine temperatures by up to 30 degrees, increase the block pressure to prevent hot spots on cylinder walls, and stop the formation of steam pockets in the block, all while delaying the onset of cavitation at higher rpm. FlowKooler Hi-Flow mechanical water pump impellers are protected from electrolysis and corrosion with a military-grade Type II Class II anodized surface coating.
( 753 )
$158.99
—
$168.99
Need better temperature control? Summit Racing™ Classic OEM heater cores will get your heater and defroster functioning properly once again. Designed to perform and built to last, our heater cores feature either aluminum or copper/brass construction and high-strength alloys to resist corrosion to serve you longer. They also offer an OE fit to make your installation easier. Keep your vehicle cabin warm with Summit Racing™ Classic OEM heater cores.
( 253 )
$126.99
—
$151.99
These Proform high-flow mechanical aluminum water pumps feature a stamped steel impeller spinning on heavy-duty ball bearings. The result is up to 40 percent more coolant flow, giving you real performance value for your dollar. They are available in a natural or polished finish.
( 149 )
$121.99
Proform electric water pumps eliminate unnecessary weight, as well as the impeller-induced drag experienced with mechanical pumps at high rpm. Proform pumps crank out up to 35+ gpm and deliver the cooling that can mean the difference between a win and second place! Made of durable, lightweight diecast aluminum, they're epoxy coated for corrosion resistance, and can be used for competition or street applications. The replacement pumps are available in several size and color options for vehicles from the 1950s and up.
( 103 )
$177.99
—
$240.99
Body Parts radiator supports are aftermarket replacement products for your old or damaged factory units. Keep your radiator secure and your cooling system in tip-top shape with their steel supports parts. An affordable solution for your replacement needs.
( 77 )
$104.99
—
$169.99
Four Seasons air conditioning compressors are made using state-of-the-art technology and quality assurance processes. Their compressors are carefully assembled and then undergo a battery of stringent quality tests, including noise, function, leak, and pressure testing. You can feel confident that you're purchasing a high-quality product from Four Seasons.
( 164 )
$166.99
—
$266.99
Tuff Stuff Performance offers standard-volume mechanical water pumps for a thousands of popular vehicle-specific applications. They're offered in a variety of styles, rotations, materials, finishes, and pilot diameters. Order the replacement model recommended for your vehicle application.
( 18 )
$108.99
—
$161.99
On Sale
Maradyne Mach One series electric fans feature a quiet, reversible 225 W motor, so they can be used as a puller or pusher, depending on your space constraints. They have a glass-filled nylon shroud and blade and are high-temperature and impact-resistant for harsh underhood temperatures and greater resistance to flying road debris.
( 1 )
$285.53
$256.98
Universal Air Conditioner offers a comprehensive line of mobile climate-control products, including A/C condensers. Quality-built to OEM specifications for accurate fit and high-efficiency function as your factory component, these air conditioning condenser units will help you restore your vehicle's A/C system back to its proper operation. And, with UAC's extensive quality control procedures and affordable pricing, you can be rest assured that you are getting the best product when you decide to purchase the UAC condenser model that is designed for your application. Additional features and benefits: * Helps maintain a desired temperature inside your car * Made of durable materials * Ensures reliable performance * Guarantees high-efficiency * Provides long-lasting service life
( 30 )
$102.99
—
$145.99
RESTOPARTS® Manufactured cooling fans offer an original fit, factory-correct features, and maximum cooling. Built to original specifications, these fans are made from quality materials for many applications. Choose the one designed to fit your project and cool your classic with RESTOPARTS® Manufactured cooling fans!
( 1 )
$142.99
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 169 )
$139.99
—
$172.99
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 218 )
$149.95
Few things get your attention as quickly as seeing white smoke billowing out from under the hood—and once stopped, precious anti-freeze all over the ground. OSC Automotive radiators are designed to fit into place as easily as the stock model came out; OEM models are used as a baseline, so their radiators meet or exceed the originals. To ensure great products, OSC starts with the highest grade of raw components, then follows factory construction standards to maintain longevity of the engine and transmission. Transmission and oil coolers are tested before installation on needed units, and radiator cores are qualified before and after assembly using state-of-the-art cycle, vibration, burst, and environment testing. OSC prides itself on solving OE design failures in order to provide radiators with better life expectancies than the originals. Over a thousand models are available for fitment on specific makes and models. Choose the style designed for your engine type and vehicle application.
( 290 )
$108.99
—
$222.99
Designed for high performance racing or driving applications, these Derale Performance stacked plate engine oil coolers offer maximum heat extraction. They are designed to keep the oil in the correct temperature range and extend the life of the engine.
Not Yet Reviewed
$245.41
RESTOPARTS® Supplied offers expansion valve upgrade kits to help convert your existing P.O.A. valve to a more modern and reliable cycling clutch system for added efficiency. The kits are all-inclusive, and come with the valve, seals, switch and wiring to provide a straightforward installation. RESTOPARTS® upgrade kits are available for R-12 or R-134-A refrigerant applications. Order the model recommended for your vehicle.
( 2 )
$103.99
—
$146.99
Keep your compressor in its place with support from Vintage Air compressor brackets. Manufactured from steel plate with smooth finished edges to fit properly, these brackets are available in several styles--low mount, side mount, top mount, and universal--to fit most applications of Chevy, Ford, Mopar, and more. Vintage Air also offers Steel-eez brackets made from laser-cut, jig-welded steel to mount your popular Sanden 508. These brackets include mounting hardware. For brackets that you know will fit and last, check out Vintage Air compressor brackets.
( 89 )
$126.99
Four Seasons offers a comprehensive line of replacement mobile climate-control products, including these high-quality remanufactured air conditioning compressors. Each unit is designed to fit and perform exactly like the authentic part and exceeds OEM parts technical specifications—so you can be confident of their efficiency to deliver cool air when you need it the most! These A/C compressors are available in nearly 200 factory-style types—for fitment on thousands of vehicle applications. Stay cool and enjoy the value of a Four Seasons remanufactured air conditioning compressor.
( 50 )
$108.99
—
$276.99
Clearance
Dorman climate control modules feature temperature controls that match original equipment fit and function. They've been designed as factory reproductions with easy plug-and-play installation—no programming required. These economical panels are available for various locations, such as in-dash, front, and rear auxiliary. Order the climate control module designed for your specific vehicle application.
( 27 )
$234.99
A Summit Racing™ plastic/aluminum radiator gives your engine bay the current cooling update it needs. These units are designed for premium performance, while fitting your vehicle's original mounts, so your ride can have a new radiator without modifications to the brackets and fittings. The radiators are available in various sizes and styles to fit your application. Efficient and economical, Summit Racing™ replacement radiators are an excellent option to restore the cooling performance your vehicle requires.
( 81 )
$169.99
—
$173.99
OER heater cores are direct-fit replacement parts you can count on to supply the OE-fit and function you're expecting. These heater cores replace your leaking, missing, or non-working core and fit directly into original heater box assembly. They are built to original equipment specifications using the correct factory materials. When it's time to replace your heater core, look to OER for durable performance.
( 19 )
$104.99
—
$138.99
PRW Competition+ mechanical water pumps are engineered to deliver a volumetrically increased water flow that will significantly improve cooling system demands for street, high performance, circle track, and endurance racing applications. They are offered in several finishes, including ceramic coated to block excessive heat radiation, and provide superior corrosion resistance and rust protection. Benefits and characteristics of the PRW Competition+ water pumps: * Auxiliary outlets for custom plumbing * Aluminum alloy pump bodies * Precision cast iron impellers * Pressure-balance water passages * Designed to equalize flow and minimize engine hot spots at any speed * Steel hubs and heavy-duty, shielded sealed roller ball bearings * Thicker rear cover for circle track application
( 1 )
$149.95
—
$266.52
Keep the track clean and your fluid where you need it most--in your car--with Canton Racing expansion tanks. These model-specific coolant expansion and recovery tanks are designed to fit in the same location as your stock tank. They're built from strong .100 in. aluminum that can be polished or anodized for a custom look. Canton Racing expansion tanks provide increased strength and a more reliable performance than stock plastic to prevent fluids from venting onto the ground--and lost completely from your cooling system. Keep your coolants flowing efficiently with Canton Racing expansion and recovery tanks.
( 63 )
$215.00
—
$253.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
