MITSUBISHI ECLIPSE - Free Shipping on Orders Over $109 at Summit Racing

Injector Dynamics ID2600x Fuel Injectors

Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.

Not Yet Reviewed

$1,449.00

The Driveshaft Shop Driveshafts

Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.

4.6 out of 5 stars ( 5 )

$1,024.98

South Bend Clutch Stage 3 Daily Driver Clutch Kits

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.

Not Yet Reviewed

$1,078.49

—

$1,171.91

South Bend Clutch Stage 4 X-Series Clutch Kits

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$1,273.80

—

$1,295.62

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$1,143.60

—

$1,256.55

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$1,013.38

—

$1,295.62

South Bend Clutch Stage 2 Drag Race Clutch Kits

South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$1,026.40

—

$1,422.94

South Bend Clutch Stage 2 Endurance Clutch Kits

South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings

3.0 out of 5 stars ( 3 )

$1,045.94

MagnaFlow Direct-Fit Catalytic Converters

MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.

4.07 out of 5 stars ( 425 )

$1,019.00

—

$1,250.00

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converters

MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty

2.67 out of 5 stars ( 3 )

$1,018.00

Nitrous Express InstaBOOST EFI Nitrous Systems

For drag racing applications, you need a big turbo to make big power, but along with the big power comes a big problem--turbo lag. These Nitrous Express InstaBOOST EFI nitrous systems have the cure for turbo lag woes. They are uniquely configured to come on strong to eliminate that dreaded turbo lag, but then ramp out the nitrous smoothly to let the mighty turbo do its thing. The end result is monster power with zero lag, even with a huge turbo. The Nitrous Express InstaBOOST EFI nitrous systems feature an adjustable 1-8 psi pressure switch to control the nitrous flow--it's sure to have you out of the hole faster than ever.

Not Yet Reviewed

$1,144.59

—

$1,285.16

Manley Pro Series I-Beam Connecting Rods

Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.

Not Yet Reviewed

$1,028.90

Weld Racing RT-S S71 Forged Aluminum Black Anodized Wheels

Weld Racing RT-S S71 forged aluminum black anodized wheels feature 3-piece forgings that are assembled by welding, for application flexibility. They are manufactured using primary forging-grade aluminum alloys to create maximum strength and durability. Weld Racing RT-S forged wheels are available in 15 in. to 18 in. diameters and are tested with F.E.A. and in-house destructive testing to ensure safety.

4.5 out of 5 stars ( 102 )

$1,025.00

—

$1,109.00

Weld Racing RT-S S71 Forged Aluminum Polished Wheels

Weld Racing RT-S forged aluminum polished wheels feature 3-piece forgings that are assembled by welding, for application flexibility. They are manufactured using primary forging-grade aluminum alloys to create maximum strength and durability. Weld Racing RT-S forged aluminum polished wheels are available in 15 in. to 18 in. diameters and are tested with F.E.A. and in-house destructive testing to ensure safety.

4.35 out of 5 stars ( 17 )

$1,025.00

—

$1,109.00

Wilwood DynaPro Radial Big Brake Front Hat Kits

Wilwood's DynaPro radial Big Brake front hat kits offer the stopping power you want and a look you'll love. They are based around the DynaPro 4-piston caliper that eliminates stresses and interruptions to the internal grain structure, combined with the low noise, low dust, and high performance of Wilwood Smart Pad brake pads and their high performance rotors. Optional rotor designs and finishes like E-coat corrosion inhibitor provide you with choices to optimize upgrades for your daily driver, competition car, or show car. Enjoy high-tech looks and improved stopping response with the addition of Wilwood DynaPro radial Big Brake front kits.

5.0 out of 5 stars ( 1 )

$1,222.09

—

$1,359.59

Injen Super SES Stainless Exhaust Systems

Injen Technology's Super SES exhaust systems are dyno-tuned to complement their performance intake systems. In doing so, the Super SES systems provide maximum horsepower and torque across the power band. The Super SES exhaust systems are manufactured from 100 percent 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC-machined flanges, and robotic TIG welding. They also feature a straight-through muffler and Injen's unique flared tip design.

4.67 out of 5 stars ( 3 )

$1,219.75

Nitrous Express Piranha Nozzle Nitrous Systems

Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.

3.0 out of 5 stars ( 1 )

$1,452.37

XClutch Stage 3 Clutch Kits

XClutch Stage 3 clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Used by rally and time attack racers around the world, the XClutch single disc carbon clutch provides exceptional heat capacity and ultra-low inertia for synchromesh transmissions. These Stage 3 clutch kits are recommended for motorsport only. Select the XClutch Stage 3 kit for your application needs.

Not Yet Reviewed

$1,059.90

SPEC Stage 2 Clutch Kits

SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)

3.65 out of 5 stars ( 17 )

$1,012.50

SPEC Stage 3 Plus Clutch Kits

SPEC Stage 3+ clutch kits are primarily intended for street use, drag racing, pulling, and autocrossing. As the flagship stage for a high-powered street or race car that requires a manageable and friendly engagement, Stage 3+ clutch kits feature carbon-graphite full-faced material that offers unparalleled life, friction co-efficient, and drivability in one package. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3+ clutch kits: * High-clamp pressure plate * Carbon semi-metallic friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting

3.0 out of 5 stars ( 4 )

$1,061.10

SPEC Mini Twin Multi-Disc Clutch and Flywheel Kits

SPEC Mini Twin multi-disc clutch and flywheel kits are intended for limited street, drag race, and road race applications. The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations, and diameters depending on the particular application and on the planned use the of vehicle. SPEC manufactures Mini Twin multi-disc clutch and flywheel assemblies to industry-leading .001 in. tolerances for perfect rotational properties and concentric actuation to optimize balance, drivability, and clutch life. Additional features of SPEC Mini Twin multi-disc clutch and flywheel kits: * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Also excellent for drift, time attack, pulling, and rally

5.0 out of 5 stars ( 2 )

$1,349.10

SPEC Stage 2 Plus Clutch Kits

SPEC Stage 2 Plus clutch kits are designed for street, drag race, pulling, and autocross use. They feature a multi-friction disc in a full-faced configuration with carbon semi-metallic material on one side and Kevlar® on the other. Bridging the gap between SPEC Stage 2 and Stage 3 clutch kits, the 2+ offers drivability and engagement quality characteristics of the Stage 2, but with a 15 to 20 percent higher torque capacity. Hubs are double-sprung with spring cover reliefs for flexibility—and heat-treated components for strength and durability. More than 700 models are available for vehicle-specific applications. Additional features of SPEC Stage 2 Plus clutch kits: * High-clamp pressure plate * Hybrid carbon-graphite and Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting

3.43 out of 5 stars ( 7 )

$1,043.10

Weld Racing RT-S S77 Forged Aluminum Black Anodized Wheels

Weld Racing has fitments for popular modern musclecars, each created uniquely for each car to maximize their stance, including these RT-S S77 forged aluminum black anodized wheels. Built from 3-piece modular construction, the RT-S S77 series wheels feature a unique, multi-spoke design. They continue the Weld Racing tradition of utilizing a forged billet center and cold-forged rim shells for proven strength and durability. These Weld RT-S S77 series wheels are offered in several mounting pad heights to clear specific drum and multi-piston opposed calipers. The Weld RT-S S77s include a matching center cap.

4.5 out of 5 stars ( 8 )

$1,025.00

—

$1,109.00

NOS Sport Compact Nitrous Oxide Systems

There's no reason why you can't give your sport compact a major power boost using the same sort of technology that the V-8 crowd has been for years. NOS has taken care of that with their Sport Compact nitrous-oxide systems. They can turn your mild-mannered ride into a fire-breather with a quick shot of 40-75 extra horsepower, with a dry system, or an even wilder 50-150 extra ponies with a wet system. The latter types are especially helpful to supercharged and turbocharged engines, which generate heavy doses of unwanted heat in the intake system. Kits come complete with the mounting brackets, nozzle, stainless-braided hose, fittings, jets, wiring, switches, and mounting hardware. Available with and without nitrous bottles.

Not Yet Reviewed

$1,349.95

MITSUBISHI ECLIPSE Parts and Accessories