Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
MERCURY Parts and Accessories
Showing In Stock Items. Show All Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 31 )
$1,299.95
—
$1,549.95
$1,168.95
—
$1,393.95
HP Tuners VCM Suite MPVI4 Credit Pro Packages
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 6 )
$399.99
—
$799.91
Optima RedTop Starting 12-Volt Batteries
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1536 )
$269.99
—
$309.99
On Sale
Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,699.95
—
$1,949.95
$1,528.95
—
$1,753.95
Summit Racing™ Direct-Fit LED Headlight Assemblies and Components
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 100 )
$79.99
—
$99.99
Summit Racing™ Premium EFI Intake Manifolds
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 86 )
$199.99
—
$242.99
Optima YellowTop Deep-Cycle 12-Volt Batteries
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 422 )
$299.99
—
$329.99
On Sale
Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$1,799.95
—
$2,049.95
$1,618.95
—
$1,843.95
SCT X4 Power Flash Programmers
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 99 )
$399.00
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 2003 )
$204.95
$119.95
—
$204.95
On Sale
MSD Blaster 2 Ignition Coils
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 446 )
$55.85
—
$66.99
$50.27
—
$60.29
Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L
Trick Flow® Track Max® hydraulic roller camshafts for small block Ford and Ford 5.0L engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium billet steel blanks that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 64 )
$374.99
—
$424.99
Flex-A-Lite Flex-Wave Electric Fans
Flex-A-Lite Flex-Wave electric fans are the revolutionary way to move more air! These patent-pending electric fans not only produce greater airflow, but are also more efficient, and quieter than traditional S-blade and straight-blade designs. Designed using advance software and tested in a wind tunnel to verify increased airflow and improved efficiency, Flex-Wave fans move up to 20 percent more airflow than Flex-A-Lite Trimline fans, and up to 25 percent more airflow than the comparable electric fans on the market. With a new look, a selection of sizes available, and several aerodynamic advantages, Flex-A-Lite Flex-Wave electric fans are ready to cool your high-horsepower applications. Advantages include: * The leading edge of the fan blade is no longer a single, solid line. The sine-wave design creates leading edges that cut through the air first. This starts movement in the air around the blade with greater efficiency. * The wave surface of the blades creates channels for the air to move along, producing more airflow and reducing energy losses. * The wave surface forms a winglet at the tip of the blade, further increasing efficiency by reducing air vortices. * The trailing edge of the fan blade also has variations, which reduces wind noise.
( 162 )
$193.99
On Sale
Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,229.95
—
$1,599.95
$1,105.95
—
$1,438.95
Edge Insight CTS3 Monitors
Edge Insight CTS3 monitors are the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. This third generation design is faster and more capable than ever. A simple installation that just plugs into an OBDII port and works on most domestic gas and diesel vehicles. They are the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle--or for those who already have significant performance upgrades and want to safely monitor their vehicle's performance. Edge Insight CTS3 features include: * 5 in. full color, 720P high-resolution, swipe screen * 1 GB of on-board Ram * High-speed data logging export * Test and track performance runs such as 0 to 60 mph and 1/4 mile * Log, graph, and export parameters to track for improved performance * Set audible and visual alert notifications when certain parameters or temperatures are met * Multiple shift-on-the-fly performance tuning settings with EAS * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge screen layouts * Fully customizable backgrounds * One-touch easy menu navigation * Notification center * Switch between US or metric units of measure * Displays dozens of parameters * Light sensitivity meter to dim screen as ambient light decreases * Wi-Fi update-able * Backup camera adaptable
( 24 )
$511.95
ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 4 )
$4,210.99
Summit Bucks
Eaton Detroit Truetrac Differentials
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 513 )
$675.99
—
$814.99
Powermaster Mastertorque Starters
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 632 )
$191.99
—
$214.99
Coker Classic Star Series Whitewall Tires
Coker Classic Star Series Whitewall tires are modern radials with best-in-class speed, load and traction ratings. They feature stylish whitewalls, which are built into the tires from Day One—delivering the perfect look for your classic car. The whitewalls fit many American and European classic cars from the 1960 and earlier. Star Series tire ratings help them to provide excellent treadwear, traction, and temperature control. Another best-in-class rating is the T speed rating (118 mph), as well as XL load rating, thanks to a reinforced sidewall. The low-noise tread looks and performs nicely; and these tires are DOT approved and E-marked for the European market. You won't find a better whitewall radial tire on the market! * Best-in-class traction: Star Series tires feature Grade-A traction and temperature ratings, meaning you can expect excellent handling and traction on wet and dry roads. They're engineered to outperform all other whitewall tires, and feature a 480 AA UTQG rating for long-lasting tread life and unbeatable traction. This makes your classic car safer to drive in all weather conditions and improves your driving experience. * Star Series tires are engineered with a reinforced sidewall to better support the weight of classic cars. This reinforcement gives the tire Extra Load (XL) rating, meaning added safety and a long-lasting sidewall that won't break down over time. * Star Series tires feature a genuine wide whitewall sidewall style. This means that the bright white rubber is added directly to the tire sidewall during initial construction of the carcass, resulting in a truly integrated, high-quality product after vulcanization. Wide whitewall tires were a very popular choice from the 1930s through the end of the 1950s, and were eventually phased out of mainstream production by 1962. Originally, wide whitewall tires featured a bias ply construction, but now Coker Tire offers them in original style bias ply and modern radial construction. * T Speed rated: Up to 118 mph (190 km/h). Often required OE for higher performance trim level classic automobiles. * Available in a wide range of sizes
( 43 )
$178.00
—
$436.00
Ford Performance Parts Hydraulic Roller Lifters
Ford Performance Parts hydraulic roller lifters are offered as direct replacements for 302-351W production small block hydraulic roller lifters; and as high performance versions for higher rpm and severe-duty applications. The high performance hydraulic roller tappets were developed specifically for racing conditions and are recommended for performance and racing applications. Both standard and high performance hydraulic roller lifters use the production dog-bone type tie bars and retainer plate components included in M-6253-A50 hydraulic roller lifter installation kits.
( 95 )
$314.99
Edelbrock Performer RPM Cylinder Heads
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 173 )
$701.50
—
$1,441.50
Lares New Power Steering Pumps
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 162 )
$99.99
—
$186.99
Derale Electra-Cool Remote Fluid Coolers
Derale Electra-Cool remote fluid coolers combine a high-capacity oil cooler core with a Tornado 10 in. electric fan for maximum cooling in any environment. This superior combination will give you the peace of mind of knowing that your fluids will be at their prime operating temperatures. These coolers feature a core with 1/2 in. copper tubes and 3/4 in. aluminum fins with plastic edge-guard protectors, all with a durable black powdercoated finish. Each fan is solidly mounted to the cooler core with clear anodized billet aluminum brackets to ensure a stable attachment. Derale Performance coolers come in 8 or 16-pass models with your choice of AN-type inlets and outlets.
( 148 )
$305.67
On Sale
Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 10 )
$1,399.95
—
$1,649.95
$1,258.95
—
$1,483.95
