Availability
Showing In Stock Items. Show All 34 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
These great looking three and four-speed automatic floor shifters feature an 11 in. chrome plated solid steel stick with knob and stop bolts for positive shifting. They include the shifter boot with bezel, linkage, and mounting hardware.
( 41 )
$170.95
$128.95
On Sale
B&M Z-Gate automatic shifters operate just like those high-dollar, gate-type racing shifters, yet cost much less. Made for street and mild competition, the Z-Gate shifters have an NHRA/IHRA-accepted reverse lockout, a neutral safety switch, a backup light switch, and a universal plastic console. Their patented "Z" shaped architecture totally eliminates the possibility of overshifting and missing a gear.
( 41 )
$318.95
$239.95
On Sale
SCT Performance blank dropship-only computer modules are shipped to you blank, so that your custom tuning provider can install the programming you need for your engine.
( 2 )
$220.00
$178.99
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 457 )
$218.95
$120.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$230.95
$150.95
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 799 )
$217.95
—
$326.95
$137.95
—
$163.95
On Sale
Method Race Wheels MR301 The Standard matte black wheels combine cutting-edge looks with excellent performance. The 10 spokes provide uniform strength between the inner and outer rim, while the stainless steel imitation beadlock bolts add rugged style. These one-piece cast aluminum wheels have a black finish with matte clearcoat for corrosion protection—and push-through branded hub covers. Method Race MR301 The Standard matte black wheels provide a wild look while guiding your ride through streets and trails.
( 3 )
$239.00
—
$299.00
$203.15
—
$254.15
On Sale
Control your vehicle emissions with Flowmaster direct-fit catalytic converters. With designs available for hundreds of vehicles from the 1980s and up, these cats meet or exceed USEPA 49-state requirements. They feature stainless steel construction with compression-bent tubing and are ready to bolt-on. Select the replacement model and options recommended for your application.
( 106 )
$199.99
$179.99
On Sale
Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.
( 78 )
$224.95
—
$238.95
$123.95
—
$131.95
On Sale
Hurst Billet/Plus shifters are the next generation of competition transmission controls. Designed with a high-pivot mechanism for reduced shifter throw and a patented design for ease of operation, they feature an anodized gold base, polymide pivot cup for reduced vibration, high-strength steel stick, and a heat-treated billet steel gear selector for the ultimate in strength and reliability. The shifters are available for more than a dozen types of transmissions. Order the model tailored to your vehicle application.
( 126 )
$309.95
$201.95
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 40 )
$278.99
$228.99
On Sale
An update of a retro style, Mickey Thompson Classic III wheels are designed for your rig, trailer, and toy hauler. These beautifully polished wheels offer a high load rating and a greater number of fitments to dress up your ride. Classic III wheels feature a concave profile, 8-hole design with a smooth outer lip, and a non-corrosive, screw-on center cap. They're finished with a deeply embossed Mickey Thompson logo for added appeal. More style, more sizes, more load—Classic III wheels are oldies but goodies made better by Mickey Thompson.
( 52 )
$295.99
$275.99
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$349.95
$192.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1948 )
$199.95
$109.95
On Sale
Summit Bucks
Mickey Thompson Canyon wheels combine vintage Medallion-inspired design with modern engineering in a new truck and SUV rim. They feature a mild concave profile, classic 5-hole oblong cutouts, stepped lip, and highly polished finish. The one-piece cast aluminum wheels are a reimagined 1960s Mickey Thompson style for modern rigs. Canyons are available in a variety of widths, diameters, bolt patterns and other fitment options to help you achieve optimal stance enhancement.
( 1 )
$249.99
$229.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$326.95
$212.95
On Sale
Some wheels are born purely for style, while others will know greatness. Method Race Wheels worked in conjunction with Subaru Rally Team USA to develop these MR502 Rally matte bronze wheels for their 2014 Rally America Open Class cars. They feature large center sections with 10 stubby spokes for uniform strength, I-beam inner lip geometry for greater impact resistance, and pockets in low-stress areas that add style while reducing weight. These wheels have a bronze powdercoated finish covered in a matte clearcoat, screw-on branded center caps, and will clear STI Brembo brakes. When the finish line is your bottom line, make sure you're using Method Race Wheels MR502 Rally matte bronze wheels.
Not Yet Reviewed
$314.00
$266.90
On Sale
The ability to safely run lower pressures without having to worry about the tire de-beading is undoubtedly a bonus for off-road enthusiasts. Method Race Wheels' MR414 UTV graphite wheels feature their patented Bead Grip technology for extreme grip at low pressure. The MR414s are designed with proprietary grooves, inner and outer bead seats, and an oversized safety hump, allowing you to go further with confidence into the unknown. And with their solid A356 aluminum construction, modern spoke pattern, and satin gray finish, Method's MR414 UTV wheels deliver standout style, as well as performance. Choose the size, bolt pattern, and offset to fit your off-road rig.
Not Yet Reviewed
$261.00
$221.85
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
$108.95
On Sale
Some wheels are born purely for style, while others will know greatness. Method Race Wheels worked in conjunction with Subaru Rally Team USA to develop these MR502 Rally matte black wheels for their 2014 Rally America Open Class cars. They feature large center sections with 10 stubby spokes for uniform strength, I-beam inner lip geometry for greater impact resistance, and pockets in low-stress areas that add style while reducing weight. These wheels have a black powdercoat finish covered in a matte clearcoat, screw-on branded center caps, and will clear STI Brembo brakes. When the finish line is your bottom line, make sure you're running Method Race MR502 Rally wheels.
Not Yet Reviewed
$314.00
$266.90
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$172.95
$112.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$412.95
$227.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
