Availability
Showing In Stock Items. Show All 26 Items.
Remflex exhaust header gasket sets feature 100 percent flexible graphite construction that's effective up to 3,000 degrees F, far exceeding any vehicle's exhaust system temperature. They will rebound 30 percent when tightened, creating an optimum seal that eliminates the need for re-torquing. The unique Remflex material has been proven for over three decades in industrial applications, where temperatures routinely exceed 2,000 degrees F. They're designed to crush up to 50 percent, filling uneven header flanges for maximum sealing and eliminating the potential for exhaust leaks. Choose the gasket style and dimensions for your specific exhaust headers.
( 840 )
$30.62
—
$36.55
When installing new headers, or putting them back on after working on your vehicle, it's important to use a new set of gaskets. Edelbrock exhaust gaskets are made of EnCore HTX-900--a high-density, non-asbestos, fiber/metal core composite material consisting of two graphite coated, heat-resistant, fiber-blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention, and unmatched sealing performance on exhaust manifolds and headers. A 50 percent recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Edelbrock exhaust gaskets are the perfect choice.
( 44 )
$29.95
—
$33.95
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 173 )
$43.00
—
$43.24
BBK reinforced header gaskets are made from the highest quality materials available. They feature a durable steel wire core to eliminate heat cracking and exhaust leaks, and provide a great seal. They're designed for use with your BBK headers, so you can depend on these gaskets to go the extra mile.
( 42 )
$49.99
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$37.33
—
$49.12
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 14 )
$33.87
On Sale
Mr. Gasket aluminum layered exhaust gaskets are reusable header or manifold seals that conform to surface irregularities and warped flanges. They will not shrink, deteriorate, or blow out. They're available for a wide variety of port styles and sizes. Features include: * Manufactured from 0.125 in. "dead soft" aluminum layers * Compresses to .060 in. to create a tight, leak-proof seal * Can withstand intense exhaust heat * Resists deterioration * Easy removal * For high performance street, drag race, road racing, and oval track use
( 60 )
$42.73
$27.77
Clean, flat surfaces are essential to a good seal. However, that type is surface is rarely available. The best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These replacements feature an embossed O-ring around the exhaust port to increase sealing pressure for tight, leak-proof performance, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gaskets, available for a wide range of port styles and sizes.
( 102 )
$30.59
—
$51.44
Fel-Pro Performance gaskets are an ideal choice for the vast majority of racing and street performance engines. They're available in a broad array of bore sizes, thicknesses, and material options to meet any need for virtually every popular performance engine design. Whether you've got a professional racing engine or a Saturday evening cruiser—Fel-Pro Performance gaskets deliver reliable sealing of combustion pressure, coolant, and oil under the toughest conditions! Order the gaskets designed to fit your application. Product features: * High-density fiber facing material attached to both sides of a perforated steel core * Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets * Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service * Meets or exceeds all original equipment specifications * Application-specific design to ensure a perfect fit
( 496 )
$39.99
—
$41.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$33.99
Hooker Super Competition exhaust header gaskets are precision-machined to provide a sure fit and unmatched exhaust sealing. These OEM-quality gaskets feature a thick (.060 in.), synthetic, high-temperature gasket material with a perforated steel core for superior grip and adhesion. This construction also promotes a precise fit between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions. Don't take chances with your repair or restoration--order the Hooker Super Competition exhaust header gaskets designed to fit your application.
( 44 )
$25.84
Doug's premium header flange gaskets are made extra-thick from specially formulated gasket material. These gaskets are rated up to 1,100 degrees F and handle exhaust pressures of up to 3,700 psi. Each gasket is designed for an exact port match with Doug's headers.
( 29 )
$48.25
—
$50.35
On Sale
Mr. Gasket has three types of exhaust gaskets--standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
( 20 )
$41.64
$22.90
—
$33.87
On Sale
Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.
( 42 )
$67.99
$44.19
SCE offers AccuSeal Pro exhaust gaskets for countless year/make and engine applications, from the 1950s and up. These premium seals are available in steel/graphite and composite materials—for nearly 20 port styles, in different heights, widths, and quantities. Order the gaskets recommended for your vehicle. Additional product details: * Designed for extreme exhaust header/manifold high-temperature and pressure usage * Perforated steel core provides superior strength, durability, and fastener torque retention to eliminate gasket failure * Graphite facing applied to both sides of core provides extreme heat resistance to prevent blowout and burnout * Good adaptability to seal header/manifold flange irregularities * Will not impede exhaust flow * Permits easy removal of gasket for engine service * Available for most OE and aftermarket cylinder heads
( 22 )
$23.01
—
$27.67
SCE Graph-Form premium header gaskets feature an extra-thick design so they can conform to warped or pitted header and exhaust system sealing surfaces as much as 1/16 in. out of tolerance. Proprietary Graph-Form material outperforms all competing brands for high-temperature sealing. These premium header gaskets are made of an exclusive high-density, super hi-temp graphite—and require only basic port shape similarity. They seal as well as copper, but offer easier fitment. Choose the style and configuration designed for fitment on your vehicle.
( 14 )
$36.83
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 193 )
$21.99
Beck/Arnley high-quality exhaust manifold gaskets are designed to meet or exceed OEM standards for ultimate form, fit, and performance. They're available in a wide range of materials and configurations for fitment on countless vehicles from the 1950s and up. Order the replacement model recommended for your application.
( 1 )
$24.99
JBA Performance Exhaust offers exhaust header gaskets to aid in the fitment of your JBA exhaust product to fix an exhaust manifold gasket leak—or prevent it from happening in the first place. These premium header flange gaskets feature a steel core laminate construction to ensure a good seal and are available in a variety of gasket applications to be an exact port match with JBA Performance Exhaust headers.
( 16 )
$40.20
—
$45.60
Cometic Armor Clad exhaust gaskets use an Armor-400 high-temperature, high performance fiber core. The core is laminated on both sides with an ETP steel cover and mechanically bonded without the use of adhesives. This innovative process allows the material to withstand temperatures of up to 2,000 degrees and is compressible to seal those less-than-perfect surfaces.
( 3 )
$36.77
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
