Availability
Showing In Stock Items. Show All 325 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 57 )
$204.99
$199.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$140.95
—
$199.95
$126.85
—
$179.95
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$282.95
$254.65
On Sale
Ever find yourself wishing someone made a Smoothie-style wheel in midnight black so you didn't have to paint it yourself? Wish granted! U.S. Wheel 510 Series Smoothie midnight black wheels feature all steel construction and a midnight black powdercoated finish. Grab some baby moons or other center hubcaps to pair with these for a knockout nostalgic look. U.S. Wheel 510 Series Smoothie midnight black wheels are available in a variety of sizes and bolt patterns. Order the style recommended for your vehicle.
( 21 )
$124.99
—
$132.99
$112.49
—
$119.69
On Sale
Coker Classic Star Series Whitewall tires are modern radials with best-in-class speed, load and traction ratings. They feature stylish whitewalls, which are built into the tires from Day One—delivering the perfect look for your classic car. The whitewalls fit many American and European classic cars from the 1960 and earlier. Star Series tire ratings help them to provide excellent treadwear, traction, and temperature control. Another best-in-class rating is the T speed rating (118 mph), as well as XL load rating, thanks to a reinforced sidewall. The low-noise tread looks and performs nicely; and these tires are DOT approved and E-marked for the European market. You won't find a better whitewall radial tire on the market! * Best-in-class traction: Star Series tires feature Grade-A traction and temperature ratings, meaning you can expect excellent handling and traction on wet and dry roads. They're engineered to outperform all other whitewall tires, and feature a 480 AA UTQG rating for long-lasting tread life and unbeatable traction. This makes your classic car safer to drive in all weather conditions and improves your driving experience. * Star Series tires are engineered with a reinforced sidewall to better support the weight of classic cars. This reinforcement gives the tire Extra Load (XL) rating, meaning added safety and a long-lasting sidewall that won't break down over time. * Star Series tires feature a genuine wide whitewall sidewall style. This means that the bright white rubber is added directly to the tire sidewall during initial construction of the carcass, resulting in a truly integrated, high-quality product after vulcanization. Wide whitewall tires were a very popular choice from the 1930s through the end of the 1950s, and were eventually phased out of mainstream production by 1962. Originally, wide whitewall tires featured a bias ply construction, but now Coker Tire offers them in original style bias ply and modern radial construction. * T Speed rated: Up to 118 mph (190 km/h). Often required OE for higher performance trim level classic automobiles. * Available in a wide range of sizes
( 35 )
$178.00
—
$278.00
$160.20
—
$250.20
On Sale
Silver Sport manual transmission bellhousings offer aluminum construction and an ideal match for your street or strip tranny. SST bellhousings are available for popular GM, Ford, and Mopar applications, and are perfect for powertrain builds, restorations, and swaps.
( 8 )
$255.00
—
$279.95
$229.50
—
$251.96
On Sale
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$155.95
$128.65
—
$140.35
On Sale
Mickey Thompson Sportsman S/T radial tires are designed for musclecar owners who demand performance, quality, and style. These M&S-rated all-season performance tires will give your musclecar a wide, low-profile look, along with the great performance, handling, and wear that your car deserves.
( 362 )
$168.89
—
$181.99
$151.99
—
$163.79
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
—
$326.95
$103.45
—
$196.15
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 356 )
$136.95
—
$249.95
$123.25
—
$224.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$157.95
—
$222.95
$142.15
—
$200.65
On Sale
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$166.99
—
$319.99
$141.94
—
$271.99
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$131.95
$118.75
On Sale
Do you have a street rod, muscle car, or sport truck? Whatever your choice, Vision American Muscle 141 Legend 5 series wheels are sure to add the styling that you desire. A classic design, coupled with one-piece cast construction and a beautiful gunmetal finish, makes Vision Wheel 141 Legend 5 an all-around great wheel choice. These wheels are designed to be used with 3/4 hex head lugs or smaller. Add a set to your next project or current ride and you're sure to be pleased.
( 110 )
$160.99
$132.48
On Sale
Clearance
U.S. Wheel 51 Series paint-ready Smoothie wheels are available in a variety of diameters, widths, bolt patterns, backspacing, offsets, center bores, and load ratings. They feature smooth, seamless 2-piece steel construction in silver or bare finish which you can paint or powdercoat to accent or match your ride.
( 20 )
$124.99
—
$242.99
$112.49
—
$218.69
On Sale
Functional and attractive, Morimoto Sealed4 Bi-LED headlight conversions are designed to replace all 4 in. x 6 in. rectangular headlights and offers full low and high beam functionality. Built with powdercoated cast aluminum housings and UV-treated polycarbonate lenses, the heart of these headlights is powered with high-quality Nichia LEDs. In low beam, the LEDs are paired with Morimoto's advanced Kuria Optic projector lens array to efficiently distribute 2,400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed4 illuminates an extra set of optics, upping the overall output to 4,300 mosquito-melting lumens. Morimoto Sealed4 Bi-LED headlights come standard with H4 3-pin male inputs and should be plug-and-play on most classic cars/trucks.
( 2 )
$286.00
$228.80
On Sale
These 57 Series Chrome Rallye wheels are the perfect choice for your classic ride. They feature a 5-hole design and have a chrome finish.
( 26 )
$169.99
—
$233.99
$152.99
—
$210.59
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$194.96
$175.46
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$276.95
$249.25
On Sale
U.S. Wheel 658 Series OE Chrysler black wheels are retro reproductions that'll enhance the look of any Mopar vehicle. Each rim is manufactured in-house using state-of-the-art equipment—then thoroughly tested for quality, performance, and DOT compliance. The 658 Series 2-piece wheels have an all-steel construction with matte black powdercoat finish, and. they're available in a variety of size options. Want to take things up a notch? Just add the classic chrome center cap, sold separately here at Summit Racing™.
( 8 )
$176.99
—
$219.99
$159.29
—
$197.99
On Sale
SCT Performance blank dropship-only computer modules are shipped to you blank, so that your custom tuning provider can install the programming you need for your engine.
( 2 )
$220.00
$169.99
On Sale
Vision American Muscle 141 Legend 5 Series black wheels are the perfect look for your hot rod. These wheels fit everything you've got. Old-school looks in new-school technology are yours for the taking. Go ahead and show off! You know you want to.
( 23 )
$148.99
$132.48
On Sale
U.S. Wheel's 26 Series Chrome Blades are durable steel wheels based on the blade design. They have a twisted, 5-spoke center and a high-luster chrome finish. They're available in many sizes and bolt patterns; a center cap is sold separately.
( 56 )
$174.99
—
$194.99
$157.49
—
$175.49
On Sale
U.S. Wheel's 52 Series wheels are the original Smoothies. The wheels have a durable mirror-chrome finish on stout steel construction. They're available in a variety of sizes and bolt patterns, in both standard and reverse offset models, to fit a large range of vehicles in nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations.
( 6 )
$198.99
—
$310.99
$179.09
—
$279.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
