Availability
Showing In Stock Items. Show All 23 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$199.95
$126.85
—
$179.95
On Sale
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$155.95
$128.65
—
$140.35
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$136.95
—
$249.95
$123.25
—
$224.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$157.95
—
$199.95
$142.15
—
$179.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 992 )
$275.95
—
$287.95
$248.35
—
$259.15
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$157.95
—
$177.95
$142.15
—
$160.15
On Sale
Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.
( 79 )
$215.95
—
$238.95
$123.95
—
$194.35
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Scott Drake offers Street/Strip HEI distributors for a wide range of applications, including many Ford and Mercury cars, trucks, and vans from the 1960s, '70s, and '80s. These units are designed for the enthusiast looking to replace outdated points or a stock distributor with a dependable high-energy ignition distributor. Converting to an HEI system makes installation and set-up easy. Just drop it in and connect two wires—it's that simple! This high performance distributor features a 50,000 V coil that delivers 2x the energy across the spark gap compared to a stock HEI distributor. It will fit all 1964-84 Ford 302 motors (will not fit 1985 and later 5.0L/302 roller engines, and will not clear stock air cleaners).
Not Yet Reviewed
$149.95
$134.95
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$349.95
$192.95
On Sale
These Mallory E-Spark conversion kits are just what you needed to replace those old points and update your ignition system. They eliminate the pesky problem of constantly having to change and adjust points. These kits include all parts that fit inside the stock distributor cap, so everything is self-contained and looks original from the outside.
( 27 )
$160.95
$144.85
On Sale
Raceline Wheels 944B Outlander trailer wheels feature a modern mesh design with outer lip treatment to aid in overall weight savings. These are the trailer version of Raceline's popular 944 Outlander wheels for trucks. They include a bolt-on cap with contrasting embossed logo. The satin black wheels are available in a variety of widths, diameters, bolt patterns, and other fitment options. Additional details: • Debossed Raceline logo feature on lip adds contrast • Accommodates "Bearing Buddy" system • Constructed from heavy-duty A356 aluminum • Available in 13" to 16" diameters • Works with GM OEM TPMS sensors for trailer wheels • Passes or exceeds all DOT standard load ratings
Not Yet Reviewed
$195.00
$175.50
On Sale
Raceline 860M Mamba trailer matte black machined wheels dress your trailer for the long haul. They feature lightweight aluminum construction with an 8-spoke design coated a glossy black. The 860M Mamba wheels are finished with machined spoke edges and accents. Raceline trailer wheels are available in a choice of sizes and bolt patterns.
( 6 )
$189.00
$170.10
On Sale
Winter road salt can ruin a nice set of wheels, but Vision HD 375 Warrior wheels are prepared! Available in several sizes and bolt patterns, these great looking wheels feature a salt-resistant finish. Vision HD 375 Warrior Series silver salt-resistant winter paint wheels have a one-piece cast aluminum construction with a robust, split 8-spoke design, and a silvery paint that will look great on many vehicles—even when sloshing through salted winter roads.
( 1 )
$138.99
$124.20
On Sale
Raceline 451MC Ryno machine trailer wheels are latest addition to the Ryno family—every bit of the legendary Ryno with its rugged mesh design and added clean retro-style lip. Constructed from one-piece heavy-duty A356 cast aluminum, they're engineered to be one of the strongest wheels on the market. Additional notes: * Includes a finished matched push-thru cap with embossed Raceline logo * Available in 15 in. and 16 in. diameters in 5-, 6- and 8-lug trailer bolt patterns * Works with GM OEM TPMS sensors for trailer wheels
Not Yet Reviewed
$195.00
$175.50
On Sale
Raceline 953BM Krank trailer satin black wheels feature a split V-spoke design with a machined ring that's undercut to allow water and debris drainage. The one-piece heavy-duty A356 cast aluminum rims are engineered to be one of the strongest available. They're offered in multiple widths, diameters, bolt patterns, and other fitment options. * Includes a satin black push-through cap with embossed chrome Raceline logo * Works with GM OEM TPMS sensors for trailer wheels
Not Yet Reviewed
$195.00
$175.50
On Sale
Raceline Wheels 881MC Mod machined trailer wheels feature heavy-duty A356 aluminum construction with a timeless 10-hole modular design. The wheels are highlighted by a beautifully machined finish. Select the ideal size for your trailer. Features: * Accommodates "Bearing Buddy" system * Push-through cap with contrasting embossed Raceline logo * Works with GM OEM TPMS sensors for trailer wheels * Passes or exceeds all DOT standard load ratings
Not Yet Reviewed
$199.00
$179.10
On Sale
Raceline 451B Ryno satin black trailer wheels are latest addition to the Ryno family—every bit of the legendary Ryno with its rugged mesh design and added clean retro-style lip. Constructed from one-piece heavy-duty A356 cast aluminum, they're engineered to be one of the strongest wheels on the market. Additional notes: * Includes a finished matched push-thru cap with embossed Raceline logo * Available in 15 in. and 16 in. diameters in 5-, 6- and 8-lug trailer bolt patterns * Works with GM OEM TPMS sensors for trailer wheels
Not Yet Reviewed
$195.00
$175.50
On Sale
Raceline Wheels 935B Defender matte black trailer wheels feature a classic off-road inspired 8-spoke design constructed from heavy-duty A356 aluminum. The trailer version of Raceline's legendary 935 Defender for trucks, these trailer wheels feature a simulated beadlock lip with stainless steel bolts. Available in several sizes, select the ideal fit for your trailer. Features: * Accommodates "Bearing Buddy" system * Push-through cap with contrasting embossed Raceline logo * Works with GM OEM TPMS sensors for trailer wheels. * Passes or exceeds all DOT standard load ratings
Not Yet Reviewed
$229.00
$206.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
