Availability
Showing In Stock Items. Show All 17 Items.
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 327 )
$620.95
—
$749.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$549.95
—
$622.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$549.95
—
$699.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$549.95
On Sale
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$549.95
—
$699.95
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 16 )
$679.06
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$530.97
Having a huge blower mounted on top of your engine is cool, but it can lead to limited choices for a distributor. The same goes for tri-power carburetor setups and big air cleaner assemblies, so MSD decided to morph their crab cap crank trigger distributor with a standard Chevy model to come up with a flat-top model! These MSD Flat-Top Pro-Billet distributors sit low in the engine block, and are topped with MSD's special crab cap that positions the spark plug terminals horizontally to give you plenty of clearance. These distributors incorporate a mechanical advance assembly that you can easily tune with the supplied springs and stop bushings. For trigger accuracy, a maintenance-free magnetic pickup is used. This pickup plugs directly into an MSD ignition control. The Flat-Top Pro-Billet distributors are supplied with a Dupont Rynite-molded distributor cap and rotor, along with a heavy-duty gear for long life in your engine.
( 9 )
$632.95
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 83 )
$526.95
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$526.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$599.95
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$501.95
—
$533.95
A Tuff Stuff Performance high-amp output alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available. The alternators are available in a variety of amperages, case and pulley styles, finishes, and with internal or external regulator. Order the model designed for your specific vehicle application.
( 285 )
$531.99
FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.
Not Yet Reviewed
$612.95
—
$662.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
