Availability
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 314 )
$38.99
—
$54.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 309 )
$39.99
—
$45.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
—
$22.99
Clearance
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$20.99
—
$31.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 179 )
$22.99
—
$50.99
Sealed Power cast piston rings are part of the comprehensive line of Sealed Power engine components that provide innovative designs, use leading edge materials, and utilize ISO and QS certified manufacturing to deliver top-quality products that meet the rigorous demands of both classic and today's modern engines. Features of and benefits of Sealed Power cast piston rings include: * Variety of top ring and top ring facing materials * Decreased friction * Very resistant to scuffing * Exacting tolerances * Meets or exceeds OEM specifications
( 81 )
$27.99
—
$54.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 116 )
$21.99
—
$55.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 169 )
$41.99
—
$43.99
ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 174 )
$49.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 114 )
$29.99
—
$69.99
Howards Cams double roller timing sets are hand-matched for quality and reliability. These 3-piece timing sets feature a premium double roller chain for extended life with cast iron cam sprockets. The 3-keyway crank sprockets offer a +4, 0, -4 cam adjustment.
( 10 )
$44.99
—
$52.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 96 )
$28.99
—
$66.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$25.99
—
$29.99
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 20 )
$21.99
—
$27.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$21.99
—
$48.79
Ensure proper alignment with Summit Racing™ bellhousing dowel pins. Our pins are a must for easier alignment when installing the bellhousing on your engine block. They contribute to fewer shifter problems and maximum life for your bearings and transmission. The dowel pins are available in a variety of sizes and offsets. Order the pair recommended for your vehicle application.
( 86 )
$25.99
—
$29.99
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$31.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 93 )
$20.99
—
$34.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable finish for good corrosion protection and long life. Get yours today.
( 179 )
$27.99
—
$30.99
Melling oil pump screen assemblies are designed for use with your Melling oil pump. These replacement pickups have a built-in filter screen and are engineered to fit the stock pan and specs—and, in some cases, Street/Strip and Circle Track applications. Various installation methods are available, including bolt-in, press fit, and screw-in. Melling offers nearly 200 models; select the assembly tailored for fitment with your specific vehicle or engine.
( 368 )
$20.99
—
$53.99
ACDelco V-ribbed serpentine belts resist the penetration of water, acids, and ozone--plus, they provide broad temperature tolerances. Their patented advanced technology design incorporates EPDM rubber, which stays soft and pliable longer than traditional belt materials. Neoprene and certain grades of rubber can harden, causing unwanted squealing and a shorter belt life. The flexible construction of these serpentines allows each belt to withstand many topside and backside bends. ACDelco offers their V-ribbed replacement belts in various lengths, widths, and rib quantities for a wide range of fitments.
( 37 )
$20.99
—
$53.99
Finish your engine dress up the easy way with Ford Performance Parts engine oil dipsticks and tubes. They are made from triple chrome plated steel, and are available with your choice of a standard, curved, or blue anodized knurled handle. Some of these oil dipsticks and tubes are similar in design to OEM units. Either way, they'll not only increase the beauty of your engine, but will add a new dimension to your entire vehicle.
( 47 )
$39.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$32.99
—
$54.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$23.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
