Availability
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 26 )
$37.99
—
$49.99
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$286.95
$136.53
—
$258.26
On Sale
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$17.99
—
$176.99
$16.19
—
$159.29
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
$190.94
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$145.85
$131.26
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$17.99
—
$149.99
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$159.65
—
$246.10
$143.68
—
$221.49
Clearance
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$33.99
—
$121.99
Bosch ignition coils are designed to provide your ignition system adequate spark to start it and keep it operating smoothly. They are manufactured from quality materials and are available in different styles to fit your specific vehicle application. All Bosch ignition coils are direct fit, so no modifications should be required.
( 3 )
$27.99
—
$61.99
On Sale
Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.
( 16 )
$14.99
—
$20.99
$13.49
—
$18.89
On Sale
Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.
Not Yet Reviewed
$7.99
$7.19
From raw materials to the final product assembly, each Spectra Premium ignition coil goes through rigorous test requirements to ensure they meet or exceed OE specifications for fit, form, function, and proper installation. Order the model designed for your vehicle and engine application. Features and benefits of all Spectra Premium ignition coils: * Each unit is durability tested at 100 cycles of thermal shock (-50 to 300 degrees F) to ensure reliability against extreme vibration * Each coil is road tested to ensure real world performance and to verify that each design meets Spectra's quality standards * 100 percent copper in both primary and secondary windings * Windings insulated by high-voltage enamel coating
( 1 )
$12.99
—
$18.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$189.99
—
$359.99
NGK coil on plug boots are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. Each coil over plug boot is constructed from durable materials that are resistant to corrosion and abrasion. These coil on plug boots are easily installed, ensuring longevity and durability of your spark plug energy. Fitments are available for dozens of makes and models.
( 3 )
$4.99
—
$18.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 111 )
$11.99
—
$103.99
Is it time for a tuneup? Replace your distributor's worn-out rotor with a new one from Standard Motor Products. Don't take chances with old, questionable, or faulty ignition components that can leave you stranded. Standard Motor Products replacement distributor rotors are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 46 )
$7.99
—
$172.99
Is it time for a tuneup? Replace your distributor's worn-out breaker points with new ones from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement breaker points are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These inexpensive units are available for use in a wide variety of makes and models. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 20 )
$6.99
—
$14.99
MotoRad ignition coils are engineered to maximize spark voltage duration for optimal engine performance. They're designed to perform under severe operating conditions and protect against extreme heat. All coils meet or exceed OEM specifications. Order the replacement ignition coils recommended for your vehicle. Additional product details: * Heat-resistant magnet produces max voltage output at all engine speeds * Graphite-infused platinum connections resist corrosion and offer superior conductivity and durability * Primary and secondary windings made with ETP-grade copper provide superior temperature protection and voltage conductivity * Pre-applied dielectric grease for easy installation
Not Yet Reviewed
$19.99
—
$48.79
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor rotors are made of durable phenolic plastic or high-grade polyester with a stainless steel spring and designed for dependable service. When it's time for a tuneup choose the value and quality of Standard's T-Series components to service your vehicle.
( 2 )
$2.99
—
$4.99
Don't take chances with an old, questionable, or malfunctioning condenser that can leave you stranded. Standard Motor Products replacement ignition condensers are designed to exceed OEM specifications for reliable, maintenance-free operation. Trust your vehicle's ignition and electrical system needs to Standard Motor Performance.
( 18 )
$5.99
—
$10.99
Clearance
URO Parts is becoming increasingly known for their quality and selection of OE replacement electrical components. They offer a broad range of relays, switches, sensors, power antenna masts, ignition components, and more for most European models from the 1960s through the present. They even source some electrical components directly from the OE suppliers. All URO manufacturing facilities are ISO 9000 certified; plus, URO Parts ignition coils are subjected to rigorous testing and extensive quality checks to ensure excellent performance and durability. Some of their electrical parts cost less than half of other European brands, meeting the growing demand for an alternative to costly factory pieces.
( 1 )
$30.99
$16.50
Clearance
Replace your cracked or worn factory coil-on-plug boots with these from Beck/Arnley! Beck/Arnley COP boots are direct replacements for the factory pieces. These coil-on-plug boots are specifically designed for your application, so you can be confident of a correct fit. Beck/Arnley coil-on-plug boots keep moisture away from your coil wells to prevent corrosion.
Not Yet Reviewed
$16.99
—
$25.99
Any time that your spark plugs or coils are serviced or become contaminated with oil, water, or coolant, the boots should be replaced. Standard Motor coil-on-plug boots are manufactured from high-temperature silicone rubber to provide great protection from thermal overload. The boots' one-piece molded design helps to protect plugs against moisture and other undesirable contaminants. When OE fails, you know you can trust Standard!
( 7 )
$4.99
—
$71.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
