Availability
Showing In Stock Items. Show All 142 Items.
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
—
$22.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$27.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$23.99
—
$43.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$45.99
Built for passenger cars and light-duty trucks, Dayco Poly Rib serpentine belts are engineered for the high-mileage, demanding drives found in today's vehicles. Dayco's W Profile serpentine belts are the most innovative advancement in serpentine belt design in years. Developed through extensive laboratory and actual road testing, these unique rib profile EPDM belts have been engineered to conform to high-mileage, worn, or misaligned drives and to help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds that resist cracking and perform better in extreme temperature ranges, Dayco Poly Rib serpentine belts deliver more than just OE-required quality. They deliver the solution to troublesome drive problems.
( 181 )
$20.99
—
$39.99
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$22.99
—
$27.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$44.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$28.99
—
$47.99
Continental replacement tensioner pulleys are direct replacements for the stock tensioners and are available for a variety of applications. All Continental replacement tensioner pulleys meet or exceed OEM specifications for all major car manufacturers.
( 9 )
$21.99
—
$40.99
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 325 )
$20.99
—
$46.99
ACDelco Gold idler pulleys are built to offer reliable operation under severe conditions. They're dependable in any weather or climate offering, you year-round performance. Mounting hardware is included on some popular applications. These pulleys are manufactured to meet or exceed your expectations for fit, form and function. Order the model recommended for your vehicle.
( 13 )
$21.99
—
$24.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$43.99
ACDelco Gold tensioner pulleys are high-quality aftermarket replacements for many vehicles on the road today. These components are built from premium materials and will exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 1 )
$21.99
ACDelco V-ribbed serpentine belts resist the penetration of water, acids, and ozone--plus, they provide broad temperature tolerances. Their patented advanced technology design incorporates EPDM rubber, which stays soft and pliable longer than traditional belt materials. Neoprene and certain grades of rubber can harden, causing unwanted squealing and a shorter belt life. The flexible construction of these serpentines allows each belt to withstand many topside and backside bends. ACDelco offers their V-ribbed replacement belts in various lengths, widths, and rib quantities for a wide range of fitments.
( 37 )
$22.99
—
$23.99
Moroso sport compact oil pan stud kits are designed to simplify pan installation and extend gasket life. They screw into the block and stay there, allowing repeated removal and reinstallation of the pan without stripping aluminum block threads. They have an Allen head socket at one end to facilitate installation. The lock nuts feature attached washers with serrated faces to provide positive grip on the pan rail, and the studs are cadmium and zinc plated to resist corrosion.
( 3 )
$46.99
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$27.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$20.99
—
$42.99
Dorman power steering pulleys are designed to fit your OEM pulley setup. They are manufactured from quality materials and meet factory specifications to ensure a precise fit. Available for V-belt or serpentine-style belt systems, Dorman power steering pulleys will give your belt the correct alignment for optimum reliability.
( 36 )
$31.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$20.99
—
$32.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$22.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$42.99
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 331 )
$23.99
ACDelco V-ribbed accessory belts are excellent OE-style replacements. These belts use top-quality materials chosen to ensure outstanding resistance to heat and oil—as well as the superior performance that drivers demand. Each ACDelco V-belt is built to provide unparalleled strength and reliability. Choose the size that matches the specs for your car, truck, or van, then notice the improvement in torque just by installing a new V-belt!
( 13 )
$20.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$24.99
—
$54.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
