Availability
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 1 )
$799.91
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$849.95
$763.95
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$849.95
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$774.01
—
$838.95
Granatelli Motor Sports Pro Series coil packs exceed your OEM expectations with increased performance. Pro Series 60,000 V coils provide more volts than factory and are intended for those running high compression engines and small nitrous kits. These coil packs increase horsepower and improve mileage and throttle response; plus, they are OBD-II computer safe. Thanks to Granatelli patent protected isolator rings, there's no RFI/EMI interference and 0 ohm resistance. Get incredible output with a set of Granatelli Motor Sports Pro Series coil packs.
( 5 )
$814.85
One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control distance sensors for fitment on a variety of vehicles. These precisely engineered sensors undergo rigorous testing to meet or exceed OE specs. Standard Motor cruise control distance sensors make long drives comfortable and safe.
Not Yet Reviewed
$949.99
Dead speed sensor? Swap it out for new Motorcraft replacement speed control sensors--an affordable solution. They are crafted to stringent OE standards to provide exact vehicle-specific fit and functionality. Motorcraft--their name says quality, dependability, and performance parts.
( 2 )
$788.99
Banks Power offers iDash Pro and PedalMonster throttle response enhancers for a wide range of applications, including many Chevrolet, GMC, Cadillac, Dodge, Ford, Ram, Lexus, Scion, Subaru, and Toyota cars, trucks, and vans from 2005 and up. PedalMonster is the only OBD-connected throttle sensitivity controller for gas and diesel vehicles. It's tuned to eliminate factory throttle delay, instantly making your vehicle more fun to drive—and actually fixes dangerous flaws found in every other throttle controller. Additional details: * Total Throttle Control: Unlike conventional cable throttles, where your pedal is directly attached to the engine's butterfly valve, electronic accelerator pedals are not mapped linearly. Part throttle drivability is often dampened as a means to stretch fuel economy, giving a mushy and unresponsive feel when on the road. Banks Power spent months engineering smooth pedal contours that are a pleasure to drive. * Tune Your Sensitivity: Select from PedalMonster's 3 driving environments with a total of 150 unique throttle contours and tune out your pedal's dead spot: -- City: Provides a smooth driving experience with a linear throttle feel and is tuned for daily driving -- Sport: Adds more sensitivity in the throttle's midrange for a sportier throttle contour feel -- Track: Lets you get into your power sooner with less throttle input, helping push through turbo spool lag or delay * Choose Your Control: PedalMonster can be used as a stand-alone device, controled by Banks' free mobile app for a stealthy install. Or, pair the PedalMonster with an iDash Pro or Data Pro to be able to adjust pedal settings on-the-fly and open up a whole world of data not available on your vehicle's dashboard. See what data iDash Pro can display for your vehicle. With Bluetooth connectivity built in, new features and support for other vehicles can be added over-the air. No computer required. * OBD-II Connectivity Brings Safety: PedalMonster is the ONLY throttle sensitivity controller connected via the vehicle's +12 V OBD-II port to read vehicle data. This reliable power connection and vehicle information is used to provide smooth pedal response and enhanced safety features. Key features: * 150 selectable smooth throttle contours * Smartest, safest, throttle sensitivity controller available * Tip-in control gradually adds sensitivity below 10 mph * Reverse Safety returns pedal to stock in reverse * ActiveSafety failsafe system * Powered by fused +12 V via OBD, not +5 V pedal reference circuit like others * Control and view activity in real-time via mobile app or iDash * Simple plug-and-play installation
Not Yet Reviewed
$779.00
Motorcraft alternators will meet your needs, and your budget, with new and remanufactured models. Both versions are performance and insulation-tested to 600 V to offer reliable operation and long-term durability, while their OE-design and tolerances provide the perfect fit for a hassle-free install.
( 3 )
$761.99
—
$1,098.99
Motorcraft direct-fit battery cables provide exceptional quality and fit. The preferred choice of Ford Motor Company, these cables will provide the dependability and performance you have come to expect for your Ford, Lincoln, and Mercury vehicles. They're available in a variety of styles for different applications. The assembled cables feature corrosion-resistant terminal ends that are factory-crimped and shrink-wrapped to help provide protection from extreme underhood conditions.
( 1 )
$1,015.99
FAST XDi Pro Race Circle Track distributors highlight machined billet housings. Available for several applications, the GM models have adjustable slip collars and most are approved for use in NASCAR competition. FAST XDi Pro Race Circle Track distributors typically feature: * Dual optical triggers synchronized within .2 degrees * Precision, stainless steel, photochemically etched trigger disc * Electronically synthesized magnetic trigger output * Ground and polished steel shaft * Wire retainer cap for secure fit * Individual cylinder timing capability * Double lip seal on shaft for oil and vacuum control * Status LED light for quick diagnostic check on optical triggers * Timing light tuning within .5 degree of optimum timing point * Distributor equipped with two optical triggers for redundancy
Not Yet Reviewed
$919.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
