Availability
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 17 )
$157.00
$141.30
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
—
$272.10
$112.64
—
$244.89
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 366 )
$169.95
—
$184.95
$152.95
—
$166.45
On Sale
Mickey Thompson Sportsman S/T radial tires are designed for musclecar owners who demand performance, quality, and style. These M&S-rated all-season performance tires will give your musclecar a wide, low-profile look, along with the great performance, handling, and wear that your car deserves.
( 362 )
$174.79
—
$181.99
$157.29
—
$163.79
On Sale
Ever find yourself wishing someone made a Smoothie-style wheel in midnight black so you didn't have to paint it yourself? Wish granted! U.S. Wheel 510 Series Smoothie midnight black wheels feature all steel construction and a midnight black powdercoated finish. Grab some baby moons or other center hubcaps to pair with these for a knockout nostalgic look. U.S. Wheel 510 Series Smoothie midnight black wheels are available in a variety of sizes and bolt patterns. Order the style recommended for your vehicle.
( 21 )
$124.99
—
$132.99
$112.49
—
$119.69
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
—
$223.85
$167.08
—
$201.46
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$234.99
$144.89
—
$211.49
On Sale
U.S. Wheel's 75 Series wheels are made from heavy-gauge steel for strength and durability and feature a high-luster chrome finish for show-quality looks. They have a familiar 8-spoke design that is available in a large range of sizes and bolt patterns, in both standard and reverse offset models, to fit nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations. Center caps are sold separately.
( 57 )
$180.99
—
$236.99
$162.89
—
$213.29
On Sale
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 32 )
$167.99
—
$189.99
$151.19
—
$170.99
On Sale
Replace your cracked and worn body mount bushings with Crown Automotive body mounting kits. They come complete with bushings, tubes, and retainers. These are natural rubber bushings that will not give a harsh ride like polyurethane bushings do.
( 23 )
$120.99
—
$223.99
$108.89
—
$201.59
On Sale
The all-terrain prodigy is here! Mickey Thompson Baja Boss A/T 3-ply all-terrain tires layer aggressive, in-your-face styling with serious trail performance in an ultra-premium package. Features and benefits: * Soft-asymmetric tread pattern design reduces noise, improves all-weather performance, off-road traction and on-road handling * 50,000-mile tread wear warranty instills confidence that the Baja Boss A/T is built to last * All new silica reinforced compound provides long-wear, all-weather performance and cut-and-chip resistance * Extreme sidebiters for a bold look, extreme off-road traction, and protection * 3PMS symbol certifies that all sizes 12.5 (315) and narrower are Severe Snow Service rated * Powerply XD construction provides puncture resistance, quicker steering input reaction, and greater stability
( 19 )
$188.89
—
$293.19
$169.99
—
$263.89
On Sale
If any of the buttons on your steering wheel don't work or you have an airbag warning light, look to Crown Automotive steering column clock springs for the solution. These rotary electrical connectors allow your vehicle's steering wheel to turn 360 degrees without breaking the electrical connection between the airbag, horn, radio, and cruise control buttons, and your electrical systems. Crown replacement parts will restore your steering wheel's electrical connections.
( 78 )
$128.99
—
$163.99
$116.09
—
$147.59
On Sale
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 12 )
$175.95
—
$182.95
$158.35
—
$164.65
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$177.95
—
$249.95
$123.95
—
$224.95
On Sale
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 2 )
$139.99
—
$146.99
$125.99
—
$132.29
On Sale
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 95 )
$111.99
—
$294.99
$100.79
—
$265.49
On Sale
Manufacturer Rebate
Bestop TrailMax Classic II seats provide the maximum in seating comfort, durability and safety. The feature premium vinyl or fabric that maintains its shape in any temperature and is mildew resistant. The specially designed Atlas frame assembly is sturdy and resists corrosion. The Bestop TrailMax Classic II seats contain variable rate of resistance springs, designed for comfort on the road and support on the trail. Internally, the high density closed cell foam is used to minimize fatigue and to maintain the seat shape.
( 17 )
$209.99
$199.49
On Sale
Crown Automotive fuel pump modules are great OE replacements for your rig. These quality units will restore the filtering, pumping, and data-sending characteristics to keep your fuel system working efficiently. When you want a good fit and proper function, choose Crown Automotive modules.
( 15 )
$125.99
—
$242.99
$113.39
—
$218.69
On Sale
Have you ever been ready to replace your Jeep windshield, only to discover that the frame is rusted out? Crown Automotive offers replacement steel frames coated with EDP primer and prepped for finish paint. Defroster ports and wiper pivot holes are already cut out for you. Whether you're repairing or restoring your Jeep, Crown replacement frames sure beat doing all of that rust repair.
( 19 )
$195.99
—
$282.99
$176.39
—
$254.69
On Sale
BTR Beehive valve springs, with their conical shape, can deliver enhanced performance. They may also provide lower seat pressures, so your valvetrain components are less stressed. BTR springs are produced from quality materials, and their beehive design will support more RPMs than stock cylindrical springs. Valve springs are the fastest moving components in your engine. Choose BTR Beehive valve springs for better durability, higher RPM potential, and performance. They're available in a variety of size, pressure, and lift options for countless applications from 2001 and up.
( 9 )
$149.99
$134.99
On Sale
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$244.99
$220.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
