Availability
Showing In Stock Items. Show All 27 Items.
Clearance
There's a big difference between generic, mass-merchandised oil filters and top-quality filters built to strict original equipment standards. The generic filter has a pretty paint job and attractive packaging, but it may not even meet manufacturer warranty requirements. Denso oil filters with First Time Fit design feature a heavy-duty steel case to resist distortion, dual-layer filtration media for maximum engine protection, a molded, pre-lubricated O-ring to prevent leakage, and a silicone anti-drainback valve to protect the engine against damaging wear on cold start-up. As an added bonus, Denso filters also employ an innovative Torque Stopper case design that prevents over-tightening and simplifies installation, a great feature for do-it-yourselfers. Generic oil filters are no bargain. Denso First Time Fit oil filters protect your precious vehicle investment. Features and benefits of Denso oil filters include: * One of the world's premier OE oil filter suppliers * Each oil filter is put through Denso's rigorous manufacturing and testing process * Efficient paper media protects engines against contaminants * Silicon anti-drainback valve prevents rough starts caused by oil draining out of the engine while turned off * Pre-lubricated molded O-ring seals better than gaskets used by other brands
( 11 )
$6.99
$4.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 136 )
$29.99
—
$156.99
$23.50
—
$75.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$27.99
—
$45.99
$17.50
—
$18.50
Clearance
Mopar Replacement accessory belt tensioners are genuine OE-replacements offering the right fit, function, and peace of mind. Most everyone understands that belts wear out and need replaced. When installing new belts you should replace the tensioners, as well, because they wear out, too. Avoid future problems by choosing from the plentiful selection of quality Mopar Replacement accessory belt tensioners, and keep your Chrysler, Dodge, or Jeep running smoothly.
( 5 )
$102.99
$47.50
Clearance
Mopar Replacement oil filter adapters units are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep—and some VWs—will receive the perfect part to repair and/or restore performance and safety, just as it should be. These Mopar Replacement parts are made from quality materials to provide reliable, long service with the right fit, function, and value. Select the engine oil filter adapter designed to fit your application.
( 2 )
$287.99
$211.50
Clearance
When you need quality crankshaft main bearings, Crown Automotive has direct replacement parts for a wide array of Jeep, Chrysler, Plymouth, and Dodge applications. Your engine bearings do many things—supporting moving parts from being damaged. Improper bearing selection can result in problems ranging from poor oil consumption to engine failure. Ensure that you're getting the proper bearings for your vehicle; choose Crown.
( 1 )
$77.99
$59.50
Clearance
A prerequisite for modern combustion engines to deliver top performance is first-class lubrication. That means not only using a quality lubricant, but also a high performing oil filter. Hengst oil filters clean the oil circuit of contaminants efficiently and are particularly robust, durable, and service-friendly. A lot of oil is pumped through your engine and system to reduce friction on moving parts and prevent premature wear of pistons, connecting rod bearings, etc. Hengst oil filters ensure optimal filtration, maximum flow, and longevity—even under the most demanding conditions. And they can be changed easily, quickly, and cleanly. Choose the oil filter designed for your vehicle.
( 3 )
$9.99
$4.50
Clearance
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 11 )
$43.99
—
$44.99
$21.50
Clearance
Dorman power steering pulleys are designed to fit your OEM pulley setup. They are manufactured from quality materials and meet factory specifications to ensure a precise fit. Available for V-belt or serpentine-style belt systems, Dorman power steering pulleys will give your belt the correct alignment for optimum reliability.
( 36 )
$14.99
$13.50
Clearance
Mopar Replacement idler pulleys are genuine OE-replacements. That means your Chrysler, Dodge, Ram, or Jeep will receive the perfect part to repair and/or restore performance and safety, just as it should be. The pulleys are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Mopar idler pulleys effectively guide with the proper tension for your engine drive belts. Order the model designed for your vehicle application.
( 2 )
$51.99
—
$84.99
$30.50
—
$39.50
Summit Bucks
Clearance
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 178 )
$4.99
$4.50
Clearance
Crown Automotive offers oil pump drive gears for a variety of applications, including many Chrysler, Dodge, Jeep, and Ram models from 2011 and up. These aftermarket replacement parts are a re-engineered version of the original part, intended to fix a common design flaw in the factory unit that can cause premature bearing failure and engine damage. Crown's design relocates a seal and adds an oil groove to properly lubricate the upper and lower bearings. Additional details: * Function: These gears are a critical part of the oil pump assembly, which is responsible for pressurizing and circulating engine oil throughout the vehicle. * Improvement over OEM: The original equipment manufacturer design had a seal placed in a position that prevented oil from reaching the upper bearing, leading to premature wear and failure. * Design changes: Crown's re-engineered assembly addresses this by moving the seal to a location above the upper bearing and adding an oil groove to the shaft to bring oil to both bearings. * Benefit: By correcting the lubrication issue, Crown's gears help prevent catastrophic engine failure caused by an oil pump failure, which can be an expensive repair.
Not Yet Reviewed
$49.99
$33.50
Clearance
Continental OE Technology Series timing belts are designed to deliver precise, non-slip timing. Engineered with OE Solutions Technology and made to last, these belts are constructed with enhanced rubber compounds, reinforced with fiberglass and aramid cords. They resist shrinkage and stretching; plus, the premium polymers offer exceptional heat and abrasion resistance. The molded teeth resist deformity and offer improved rigidity to ensure a long, dependable life. Hundreds of replacement belts are available for applications from the 1970s and up.
( 5 )
$37.99
$29.50
Clearance
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 82 )
$42.99
$22.50
Clearance
OMIX-ADA accessory belts will deliver continuous performance. They offer a selection of stock replacements to service many years and models of vehicles.
( 1 )
$28.99
$18.50
Clearance
Crown Automotive connecting rod bearings will provide reliable value and performance in your engine. Because of the force involved between the piston and crankshaft, bearings are susceptible to wear. These OE-fit replacements are made from quality materials and are available individually or in sets for numerous models. Choose Crown connecting rod bearings to assist you in servicing your engine for lasting efficiency.
( 1 )
$11.99
$7.50
Clearance
For over 100 years, professional technicians have trusted Standard Motor to replace failed OE parts. Standard manufacturers the highest quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensure Standard parts don't just fit, they perform and they last. These replacement engine oil filter housings come complete and fully assembled—ready for installation, saving time with every repair. They include the correct oil filter, cap, bypass valve, heat exchanger (cooler), oil pressure sensor, oil temperature sensor, gaskets, and bolts. They do not require reusing any of the old components. Standard Motor's high-strength, glass-filled nylon plastic housing is less prone to cracking and helps cool the oil. Aftermarket housings made with different materials than OE may retain more heat than the factory intended. The housings use the correct, vehicle-specific oil filter for a perfect match, eliminating problems for future oil changes. Detailed, illustrated instructions with torque specs are included to help make installation easier. Order the housing designed for your application.
Not Yet Reviewed
$141.99
—
$161.99
$117.50
—
$140.50
Clearance
Most people change their oil 3-5 times a year. Instead of going through the hassle of trying to find the correct part every time, use Crown Automotive oil filters. Each filter has the same specs as the originals for easy installation and reliable performance. Crown Automotive knows that playtime is in limited supply, so get the right oil filter the first try.
( 2 )
$10.99
$6.50
Clearance
Clean air in, exhaust air out—Crown Automotive valves fit your vehicle with quality and value you can count on. Maintaining efficient engine power depends on the operation of the intake and exhaust valves. These Crown replacements are made from quality materials to provide long-lasting service. Valves are available for a wide range of Jeep and Dodge models, in particular.
( 2 )
$15.99
$10.50
Clearance
Are you rebuilding an engine and need a fresh set of pistons? OMIX-ADA offers high-quality replacement pistons from standard to .080 thousands over size—and wrist pins are included. The cast aluminum pistons are available in various styles—such as flat top with a trough D-shaped cup—and bore sizes. Order the model recommended to fit your vehicle and engine application.
Not Yet Reviewed
$64.99
$36.50
Clearance
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,778.99
$1,480.50
Clearance
Mopar Replacement expansion plugs help restore original performance with the proper fit, form, and function. They feature high-quality materials and strict design requirements that meet or exceed OE specifications—critical to ensuring an easy installation and dependable service. Choose the Mopar Replacement expansion plugs designed for your application and help guard your engine against freeze damage.
Not Yet Reviewed
$33.99
$15.50
Clearance
When your timing belt tensioners wear out and need replaced, choose these direct-fit replacements from Mopar Replacement. They are manufactured from durable quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to help you to restore and/or repair your Chrysler, Dodge, or Jeep properly and safely.
Not Yet Reviewed
$176.99
$78.50
Clearance
The PCV valve is an important part of the engine, even though it may not look it. PCV stands for Positive Crankcase Ventilation. The PCV valve was the first of the emission system components to be put into production vehicles. Critical to Emissions Compliance Testing, these Fram PCV valves can help to ensure that your vehicle meets emissions standards. Regular maintenance helps to prevent poor engine performance, rough idling, and stalling. The replacements are available in a variety of configurations for fitment on numerous makes and models.
Not Yet Reviewed
$13.99
$6.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
