Availability
Showing In Stock Items. Show All 251 Items.
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 233 )
$467.78
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 111 )
$256.99
—
$494.99
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$307.99
Fox 2.0 Factory Race Series ATS steering stabilizers offer unrivaled steering control, a striking high-tech appearance, and can be tailored to any driving style and setup! The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine-tune the feel. An integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is Fox's relocating hardware that moves the steering stabilizer up and out of the way, utilizing a new track bar relocation bolt and tie-rod mounting clamp. Take control of your steering with the customizable Fox Racing Shox 2.0 Factory Race Series ATS steering stabilizer, available for countless applications from 2007 and up. Additional features: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Hard-anodized for a durable finish * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Race-developed high-flow piston design * External reservoir design separates shock oil from the high-pressure nitrogen * Shaft is 5/8 in. hard-chrome plated heat-treated alloy steel * Unique tie rod mounting clamp * Quiet nitrile rubber allows for increased suspension articulation * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Direct replacement for stock and aftermarket lift kits
( 2 )
$524.95
Borgeson Universal Saginaw 525 manual steering boxes are recommended for manual box applications on all street rods, especially those over 2,500 lbs. They can easily be adapted to the majority of street rod models. The steering boxes feature a 3/4 in. input for a simple steering shaft connection and are manufactured from OEM-quality cast iron.
( 22 )
$317.52
—
$362.17
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 11 )
$318.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 55 )
$275.00
—
$425.00
These Borgeson Universal telescoping steering shafts can be used in a variety of applications and will make the installation and removal of steering system components simple and easy. By pulling or pushing on the shafts, you can shorten or increase their overall length. They meet NHTSA guidelines for collapsibility in passenger cars and add a measure of safety. The steering shafts can also be trimmed to fit shorter applications.
( 396 )
$281.80
—
$341.97
Derived from Fox Racing Shox original ATS stabilizer, the 2.0 Performance Series TS steering stabilizers utilize a Through Shaft (TS) architecture that eliminates shaft fluid displacement throughout the stabilizer's entire travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback. The result is unrivaled steering control--at a nice price point--in a single, bolt-on stabilizer. Want to improve the comfort and handling in your Jeep Wrangler JK? Fox Racing Shox has the solution with 2.0 Performance Series TS steering stabilizers! Features and benefits include: * Impact extruded and CNC-machined 6061-T6 clear anodized aluminum one-piece body resists rust over time * Body plating is clear-anodized for a durable finish * External reservoir design separates shock oil from high-pressure nitrogen * Components are black anodized, CNC-machined 6061-T6 billet aluminum * Application specific mounting hardware (multiple clamp sizes are available for stock or aftermarket heavy-duty tie-rods) * Hard chrome-plated, heat-treated alloy steel shaft * Race-developed high-flow piston design * Redundant sealing pack system main seal, wiper seal, scraper seal * Quiet nitrile rubber bushings allow for increased suspension articulation * Direct replacement for stock and aftermarket lifts kits
( 4 )
$375.95
Air Lift Load Controller 1 systems are the ultimate in heavy-duty air control. They're designed for heavy applications such as motor homes, towing fifth wheels, and commercial use. These systems work great on class A and C motor homes, and adjust easily for changing road and load conditions.
( 18 )
$280.99
TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizers offer a wide range of adjustability with a 3-position fast adjust knob featuring soft, medium, and firm settings. These Jeep-specific steering stabilizers deliver a properly weighted steering feel and consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Built from the ground up with a focus on fitment and function, these Wrangler-specific Falcon Nexus EF (Equal Force) steering stabilizers deliver the best damping characteristics possible.
( 1 )
$434.99
Reid Racing offers heavy-duty steering knuckles for a variety of your off-road applications. These heavy-duty steering knuckles are cast from high-strength ductile iron and beefed up with extra material and ribbing. Fully machined and ready to install, Reid Racing heavy-duty steering knuckles feature cast-in steering stops that eliminate bent stop bolts and they are topped off with a bright powdercoated finish.
( 15 )
$399.00
Rock Jock Antirock sway bar kits provide the balanced performance of front and rear suspension for rugged off-road conditions. They give the driver increased traction by balancing and distributing the weight over all four tires. The bars are made of SAE 4130 heat-treated steel for ultimate strength. Kits are available with various components and in sizes for universal and vehicle-specific applications.
( 8 )
$535.00
—
$554.00
AEV Conversions Tuned Bilstein 5100 shocks offer a slightly firm, sportier feel and they are available in different AEV kits as well as in sets by themselves. Combined with AEV's progressive rate coil springs in their DualSport kits, the pairing produces an increase in both up travel and down travel with better articulation, along with improved off-road speed potential and bottoming control. For a suspension system that will impress on the street and trails, try on a set of AEV-tuned Bilstein RT5100 shocks. Sets include front and rear shocks; choose the ones designed for your Jeep.
Not Yet Reviewed
$368.00
Yeti XD Series is Steer Smarts' most extreme steering linkage for your Jeep JK Wrangler. These "No Drill" top mount drag links are complete bolt-ons for high steer applications—and feature the patent pending reverse taper mount design. They're the quickest and easiest drag link flip on the market; installation takes just minutes, and there's no need to modify or alter your stock knuckle. The drag links bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences * A minimum of 17 in. wheels is recommended. 16 in. wheels with a maximum 4.5 backspacing might fit but not guaranteed BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves Steer Smarts' ball joint reliability over the competition * Fully greaseable DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents the linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability
Not Yet Reviewed
$426.55
—
$475.00
TeraFlex Jeep JL/JT Dana 30/44 heavy-duty ball joints are designed to fit all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. These heavy-duty ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. Whether you want to restore your stock chassis to like-new performance or you're looking to improve upon the factory design, TeraFlex has got the right upper and lower ball joints to replace your worn out, damaged, or inferior ball joints.
( 3 )
$299.99
Steer Smarts YETI XD sector shaft braces will make an immediately noticeable improvement to the overall drivability of your vehicle. These braces with frame-side track bar reinforcement bracket, were engineered to bolt onto the stock track bar mount on the frame. The purpose of this is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing, deflecting, moving when cycling your steering system side to side. The second part is to reinforce the frame-side track bar mounting location to help minimize the deflection of these frame-side brackets and ensure that the mount doesn't break under extreme stress. Select the one designed for your Jeep. Features: * Easy bolt-on installation with minimal modification needed * 1/4 in. thick wall steel laser-cut bracket * 1/2 in. steel sector support with sealed roller bearing * All upgraded fasteners included * E-coated for corrosion resistance that won't chip when torqued
Not Yet Reviewed
$320.00
Steer Smarts offers Yeti XD Pro-Series front track bars for a variety of applications, including many Jeep models from 2007 and up. They're fully adjustable on the vehicle and are designed to be the strongest track bar available for the Wrangler JL/JT. Pro-Series bars come with polyurethane bushings rather than rubber, which is a harder durometer, limiting the amount of deflection allowed by the bushing. Available in red or black. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from solid steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry on the Jeep Wrangler JL * Includes all necessary installation hardware
( 1 )
$335.00
TeraFlex front adjustable track bars locate the axle side-to-side in the vehicle. They're designed to raise and lower with the suspension movement in an arc that matches the arc of the drag link. These track bars can be adjusted to achieve that optimum angle to maximize suspension travel and efficiency. They'll also eliminate bump steer problems without the need of drilling any holes. When you're ready to lift your vehicle, TeraFlex front adjustable track bars will eliminate any steering or suspension travel issues that may occur. Order the model recommended for your Jeep application.
( 7 )
$271.99
—
$336.99
Rock Jock lifted coil springs will provide 3.5 to 5 in. of lift to your Jeep. Many are designed to work with their Johnny Joint suspension systems, as well as other manufacturer's lift kits. Available for front or rear or both, Rock Jock coil springs deliver a comfortable ride and excellent performance off-road. With the perfect combination of rates, quality materials, and construction, Rock Jock lifted coil springs won't let you down.
( 1 )
$284.00
—
$521.00
Crown Automotive offers leaf spring kits for a variety of Jeep applications with Dana 35 rear axle. These suspension lift and leveling assemblies include heavy-duty front and rear leaf springs, pivot bushings, U-bolts, and a set of four RT Off-Road shackles. Kit LSK4 is designed to lift the vehicle 1-1.5 in. Box measures: 12.25 in. x 8.25 in. x 7 in.; front springs measure 46.5 in. x 10 in. x 3.25 in.; rear springs measure 47 in. x 9.75 in. x 3.25 in. Order the leaf spring replacement kit designed to fit your vehicle.
Not Yet Reviewed
$319.99
—
$524.99
Fox Racing Shox 2.0 Performance Series LSC reservoir smooth body shocks deliver race-dominating performance in hassle-free, bolt-on packages. Plus, 10 clicks of compression adjustability to fine-tune your ride! From very soft to very firm, the improved LSC adjusters provide increased oil flow over their predecessors, eliminating harshness associated with restricted oil flow. They also feature hard stops at either end of adjustment to prevent continuous rotation of the knob, making it easier to track adjustments in hard-to-reach locations. Fox Shox 2.0 Performance LSC shocks maintain their heat-reducing design that includes metal-impacted aluminum shock bodies to dissipate heat faster than conventional steel. The external reservoirs allow for increased oil and nitrogen capacity, while delivering a striking race look. And the shock's race-developed, high-flow damping piston is matched with application-specific valving to ensure predicable ride quality capable of handling the roughest road conditions. Models are available for front and/or rear applications from 1984 and up. Additional features: * One-piece 2.0 in. impact-extruded, CNC-machined 6061-T6 aluminum bodies * Clear anodized for a durable finish * Smooth bore hard-anodized 6061-T6 aluminum reservoirs * Black anodized, CNC-machined 6061-T6 billet aluminum components * Hard-chrome plated heat-treated alloy steel shafts * Race-developed high-flow piston design * Application-specific valving to maximize performance * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation
Not Yet Reviewed
$495.95
With their ball-in joint, massive 2 1/2 in. diameter body, and huge 1 1/4 in. threads, Rough Country X-Flex joints offer considerable range, strength, and safety for off-road applications. The upper arm X-Flex joints pivot up to 20 degrees, while the lower arm joints are capable of a staggering 35 degrees of pivot range. Rough Country X-Flex control arms will help transform your vehicle into a legend when you order the set specifically designed for your application! More product features and items may include: * Front upper adjustable control arms (application dependent) * Front lower adjustable control arms (application dependent) * Rear upper adjustable control arms (application dependent) * Rear lower adjustable control arms (application dependent) * Fully greaseable * Flex joints and hardware * Allows for greater off-road articulation * Detailed instructions
( 1 )
$259.95
—
$399.95
Bilstein B8 5160 Series stock-mount remote reservoir shocks feature the company's industry-leading monotube design, with a reservoir mounting configuration specifically designed for each application. Their unique digressive valving system instantly produces full damping capabilities for serious off-road performance and control. The remote reservoir dramatically increases shock oil capacity for excellent heat dissipation and damping sensitivity. A floating dividing piston is located in the reservoir of these shocks to offer increased wheel travel and more shaft movement. Special swivel banjo fittings on the reservoir hose allow for 360 degrees of rotation. Bilstein's exclusive Triple-C Technology finish provides the B8 5160 Series shocks with lasting great looks and easy care.
( 11 )
$289.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
