JEEP J-3800 | Summit Racing

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 1011 )

$112.74

—

$139.98

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$192.15

—

$199.29

Powermaster XS Torque Starters

Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.

4.56 out of 5 stars ( 918 )

$249.99

Lokar Hi-Tech Flexible Braided Stainless Transmission Dipsticks

Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.

4.55 out of 5 stars ( 341 )

$138.95

—

$163.95

Powermaster OEM-Style High-Torque Replacement Starters

Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.

4.35 out of 5 stars ( 468 )

$160.99

—

$238.99

Lokar Speedometer Cables

Lokar premium speedometer cables feature PTFE-lined housings with machined aluminum fittings. The inner and outer housings are designed to be cut-to-fit, so they can be tailored to your needs. These kits come complete with all fittings. They're compatible with any cable-driven aftermarket speedometers, or factory speedometers with a 5/8 in.-18 male thread. Order the model recommended for your transmission application.

4.74 out of 5 stars ( 72 )

$129.95

—

$205.95

PerTronix Ignitor III® Solid-State Ignition Systems

These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.

4.52 out of 5 stars ( 85 )

$195.96

Lokar Midnight Series Flexible Braided Stainless Transmission Dipsticks

Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.

4.65 out of 5 stars ( 81 )

$151.95

—

$176.95

Lokar Hi-Tech Kickdown Kits

Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.

4.79 out of 5 stars ( 469 )

$135.62

—

$147.95

On Sale

Earl's Performance Oil Cooler Adapters

Earl's Performance oil cooler adapters replace the OEM oil filter housing. These oil filter bypass adapters allow for the installation of a remote oil filter and optional oil cooler. Their billet construction is black anodized and stainless hardware is included. They use O-ring seals for a leak-free installation.

4.93 out of 5 stars ( 15 )

$157.95

TCI Full Manual Valve Bodies

Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.

4.59 out of 5 stars ( 59 )

$221.95

Proform Street/Strip HEI Distributors

Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.

4.07 out of 5 stars ( 172 )

$239.99

—

$243.99

Derale Engine Oil Filter Relocation Kits

Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.

3.85 out of 5 stars ( 40 )

$104.38

—

$112.40

Trans-Dapt Performance Remote Oil Filter Relocation Kits

Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.

3.51 out of 5 stars ( 79 )

$121.99

—

$122.99

PRW Sportsman Steel Roller Tip Rocker Arms

PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls

3.92 out of 5 stars ( 36 )

$204.78

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 2007 )

$158.95

$143.05

Lokar Midnight Series Stainless Steel Hi-Tech Kickdown Kits

Lokar Midnight Series stainless steel Hi-Tech kickdown kits have PTFE-lined cables, which are made with an extruded liner for extended life. They feature black anodized aluminum fittings and ferrules to eliminate frayed ends and a black stainless steel braided cable jacket. The kits are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the model recommended for your transmission application.

4.57 out of 5 stars ( 37 )

$161.95

Powermaster Street Alternators

Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.

4.63 out of 5 stars ( 1844 )

$171.99

—

$245.99

PRW High Performance Sportsman Harmonic Dampers

PRW High Performance Sportsman harmonic dampers are cast from nodular iron, and are suitable for engines generating up to 400 hp. Unlike most OEM dampers, the hub and ring are splined to prevent radial movement of the outer ring. These dampers are 30 percent stronger than OEM dampers made from gray iron. With the combination of top-quality and affordability, these PWR dampers really raise the bar in the high performance industry. Features and specs include: * Ideal for street rebuilds * Accurate crank bore for a proper pressed-fit * Externally balanced dampers include removable counterweights * Available in black with laser-etched timing marks * Not SFI-certified

4.46 out of 5 stars ( 39 )

$227.19

Centerforce Performance Clutch Discs

Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.

4.7 out of 5 stars ( 54 )

$178.95

Mr. Gasket Automatic Transmission Oil Pans

These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.

4.21 out of 5 stars ( 96 )

$127.95

—

$135.95

U.S. Wheel 75 Series Chrome 8-Spoke Wheels

U.S. Wheel's 75 Series wheels are made from heavy-gauge steel for strength and durability and feature a high-luster chrome finish for show-quality looks. They have a familiar 8-spoke design that is available in a large range of sizes and bolt patterns, in both standard and reverse offset models, to fit nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations. Center caps are sold separately.

4.12 out of 5 stars ( 59 )

$192.99

—

$236.99

TCI Speedometer Gear Housings

TCI speedometer gear housings are designed to replace the OEM gear housing in your automatic transmission. They install easily into the removable section of the rear tailhousing of the transmission. The TCI speedometer gear housings are available in different tooth combinations and are identified by their color. Upgrading to larger diameter tires? Changing ring and pinion gear ratios? Make sure you use one of these TCI speedometer gear housings to keep track of your speed accurately.

4.71 out of 5 stars ( 171 )

$114.95

BedRug Classic Bed Mats

Protect your truck bed, even if it already has a sprayed-on or drop-in bed liner installed. BedRug Classic Bed Mats add a rugged polypropylene fiber and closed-cell foam liner for an extra layer of looks and durability. These waterproof foam pads are comfortable, easy to install—and are resistant to gas, oil, bleach, and acid. BedRug Classic Bed Mats offer a non-skid surface for your truck bed, preventing unwanted cargo shift, and they're easily cleaned with a garden hose, vacuum, or pressure washer. Order the mat designed to fit your specific vehicle.

3.75 out of 5 stars ( 4 )

$119.95

JEEP J-3800 Parts and Accessories