Availability
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,595.00
On Sale
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
$5,129.99
On Sale
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$9,499.99
$9,309.99
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$7,250.00
—
$7,750.00
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,429.99
On Sale
Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy
( 2 )
$6,772.95
$6,095.66
—
$8,347.95
Find adventure with AccuAir Suspension's advanced and proven dynamic lift kit systems for Jeeps--complete kits that allow for total versatility when it comes to on and off-road fun. And, while air springs and air lift kits are not common on Jeep suspensions, these kits give you capabilities no other Jeep has. More than a lift to ride higher and more comfortably than factory spring and shock kits; with AccuAir dynamic lift kits you will have the option to raise and lower your Jeep at the push of a button. AccuAir dynamic lift kit systems lower to stock level for garage entry then automatically adjusts to 3.5 in. of lift. While off-roading under 25 mph the Jeep can be adjusted to 5.5 in. of lift. The underbody mounted air tank is regulated onboard air for inflating tires and tools. The system automatically adjusts to optimal ride height at speeds above 25 mph. These dynamic lift kits will auto level your vehicle, a must when towing, and overlanding enthusiasts can easily level their Jeep for overnight stops. The fully bolt-on system includes new lower control arms, sway bar links, and front track bar for increased strength and FMVSS 126 compliant handling. Each system includes JRi shocks and AccuAir e-Level Plus control system, which can be controlled via a hardwired Touchpad+ or by Bluetooth through the ePlus app. Choose the AccuAir dynamic lift kit packaged for your Jeep.
Not Yet Reviewed
$6,999.99
—
$7,499.99
TeraFlex Jeep JT Alpine RT Hybrid coilover suspension systems are designed specifically to fit the needs of the JT Gladiator, both 3.0L diesel and 3.6L gas. For each Gladiator powertrain, a corresponding TeraFlex suspension system has been meticulously crafted to accommodate the subtle differences among the available motor choices within the Rubicon Gladiator lineup. These Hybrid systems integrate front bolt-on coilover brackets and JT-specific Falcon 3.3 coilovers, ensuring a high-performance, noise-free ride. Also, the rear extended travel suspension coupled with Falcon 3.3 quick-adjust piggyback shocks allow for up to 16 in. of travel. The systems cater to JL Rubicon factory width axles, as well as the Tera60 or other axles featuring a 3.25 in. axle tube diameter, while addressing the common shortcomings prevalent in today's noisy coilovers. Falcon coilover shocks are meticulously designed for utterly silent operation with sealed gimble bearing shock mounts, ensuring solid and noiseless control when combined with the TeraFlex coilover mount solution. This unique mount design allows for full suspension cycling without any component contact. Select a TeraFlex Alpine RT Hybrid coilover system designed for your Jeep JT. Additional features and benefits: * Race-inspired performance for increased vehicle stability * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for unobstructed suspension travel and articulation * 13 in. stroke front coilovers * Adjustable crossover for True Dual-Rate * JT-specific springs and shock tuning * Refreshed speed bumps silently provide 4 times the bottoming resistance * RT4 long arm suspension for control, flex, and stability * Bolt on 1/4 in. laser-cut reinforced coilover brackets * Adjustable Alpine IR long arms and brackets balance front caster angle and pinion angles, as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * TeraFlex rear sway bar included * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Heavy-duty forged adjustable track bars and track bar brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling * Falcon's sleek, hard-anodized shock body serves as the perfect bearing surface for the new sealed and lubricated spring sliders * Sliders also boast roller-bearing spring seats, guaranteeing noiseless spring movement during compression and extension, even during spring twisting
Not Yet Reviewed
$10,399.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$6,462.99
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$7,051.99
—
$8,661.99
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,197.99
—
$11,544.99
TeraFlex Alpine RT3 short arm suspension systems are available for 3 in. and 3.5 in lift applications—with or without Falcon 3.3 Fast Adjust shocks. These Rogue Trail (RT) kits include all of TeraFlex's top-of-the-line components, including their IR (independent rotation) control arms and innovative IR bushings. The adjustable control arms tune caster angle, anti-squat geometry, and tire position; while the HD forged adjustable track bar(s) works with the track bar bracket(s) to improve steering response, optimize vehicle roll center, and reduce body roll for unsurpassed handling. This results in increased suspension articulation, along with superior ride quality and performance, regardless of terrain. It also minimizes brake dive and acceleration squat. IR bushings reduce bind during droop for less overall bushing load during articulation. TeraFlex suspension systems also provide reduced noise, vibration, and harshness (NVH). Order the short arm suspension system model recommended for your Jeep application.
Not Yet Reviewed
$5,589.88
TeraFlex Jeep JT Gladiator 3.5 in. Alpine CT3 long arm extended-travel suspension systems open a new world of tire sizes and off-road possibilities. If you have that "do it all" attitude, these 3.5 in. Alpine CT3 systems will make it happen. TeraFlex Alpine CT (Cross-Trail) systems feature Alpine long arms and brackets, as well as a front heavy-duty forged adjustable track bar and brackets for maximum tunability and flawless performance for years to come. These extended-travel suspension systems include carefully selected components to safely provide 16 in. of rear suspension travel, resulting in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort. Features and benefits: * Adjustable Alpine long arms and brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * Constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength * On higher lifts, bolt-on long arm brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the long control arms * Brackets are gusseted and reinforced for superior strength with reduced NVH * Brackets feature a triple-stage powdercoating that provides superior durability and corrosion resistance * Long arm suspension crossmember provides additional strength * Driveshaft lowering spacers, forged ST sway bar, and extended-travel accessory kit safely provide 16 in. of rear suspension travel * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Delivers true Cross-Trail (CT) performance * Dependable performance with zero worries * Positive, responsive handling with reduced NVH * High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality * Front heavy-duty forged adjustable track bar and brackets improve steering response, center axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling * Front and rear progressive bump stops provide progressive compression during high-speed suspension movement * Front sway bar quick-disconnects * Full range of movement for off-road flex and articulation * TeraFlex Limited Lifetime Warranty against defects
Not Yet Reviewed
$5,562.86
TeraFlex Jeep JT Gladiator 4.5 in. Alpine CT4 long arm extended-travel suspension systems are engineered for the enthusiast who demands an off-road capable suspension with maximum adjustability, flex, durability, and quiet performance. TeraFlex Alpine CT (Cross-Trail) systems are all-inclusive, including everything from the industry leading adjustable Alpine long arms and brackets to TeraFlex's exclusive rear extended-travel system. Alpine CT4 systems are designed to flex and droop over boulders and fly across flats like nothing you have ever experienced. And like all TeraFlex lifts, the highway manners of the CT4 are legendary--engineered for hardcore Jeeping without sacrificing weekday ride comfort. Features and benefits: * Adjustable Alpine long arms and brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * Constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength * On higher lifts, bolt-on long arm brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the long control arms * Brackets are gusseted and reinforced for superior strength with reduced NVH * Brackets feature a triple-stage powdercoating that provides superior durability and corrosion resistance * Long arm suspension crossmember provides additional strength * Driveshaft lowering spacers, forged ST sway bar, and extended-travel accessory kit safely provide 16 in. of rear suspension travel * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Delivers true Cross-Trail (CT) performance * Dependable performance with zero worries * Positive, responsive handling with reduced NVH * High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality * Front heavy-duty forged adjustable track bar and brackets improve steering response, center axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling * Front and rear progressive bump stops provide progressive compression during high-speed suspension movement * Front sway bar quick-disconnects * Full range of movement for off-road flex and articulation * TeraFlex Limited Lifetime Warranty against defects
Not Yet Reviewed
$5,817.86
TeraFlex Jeep JT Gladiator 3.5 in. Alpine RT3 long arm extended-travel suspension systems provide a completely new driving experience with carefully selected components to safely provide 16 in. of rear suspension travel. TeraFlex Alpine RT (Rogue-Trail) systems include top-of-the-line components. The bolt-on Alpine IR long arms and brackets and HD forged adjustable track bars and brackets offer maximum adjustability making them the perfect mix of performance and comfort. Features and benefits: * Adjustable IR Alpine long arms and brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * Constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength * On higher lifts, bolt-on long arm brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the long control arms * Brackets are gusseted and reinforced for superior strength with reduced NVH * Brackets feature a triple-stage powdercoating that provides superior durability and corrosion resistance * Long arm suspension crossmember and RockGuard transmission skid plate provides additional strength * Driveshaft lowering spacers, forged ST sway bar, and extended-travel accessory kit safely provide 16 in. of rear suspension travel * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Delivers true Rogue-Trail (RT) performance * Dependable performance with zero worries * Positive, responsive handling with reduced NVH * Innovative, maintenance-free IR bushings provide unrestricted rotation and flex, as well as excellent NVH damping to improve on- and off-road ride quality and performance * Heavy-duty forged adjustable track bar and brackets improve steering response, center axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling * SpeedBump and progressive bump stops provide progressive compression during high-speed suspension movement * Front sway bar quick-disconnects * Full range of movement for off-road flex and articulation * TeraFlex Limited Lifetime Warranty against defects
Not Yet Reviewed
$7,588.82
TeraFlex Jeep JT Gladiator 4.5 in. Alpine RT4 long arm extended-travel suspension systems excel on the highway, off-road, through the desert, or rock crawling! They feature full suspension adjustability with carefully selected components to safely provide 16 in. of rear suspension travel. TeraFlex Alpine RT (Rogue-Trail) systems include top-of-the-line components. The bolt-on Alpine IR long arms and brackets and HD forged adjustable track bars and brackets allow full suspension adjustability, while the SpeedBumps smooth out unexpected trail bumps. Features and benefits: * Adjustable IR Alpine long arms and brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * Constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength * On higher lifts, bolt-on long arm brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the long control arms * Brackets are gusseted and reinforced for superior strength with reduced NVH * Brackets feature a triple-stage powdercoating that provides superior durability and corrosion resistance * Long arm suspension crossmember provides additional strength * Driveshaft lowering spacers, forged ST sway bar, and extended-travel accessory kit safely provide 16 in. of rear suspension travel * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Delivers true Rogue-Trail (RT) performance * Dependable performance with zero worries * Positive, responsive handling with reduced NVH * Innovative, maintenance-free IR bushings provide unrestricted rotation and flex, as well as excellent NVH damping to improve on- and off-road ride quality and performance * Heavy-duty forged adjustable track bar and brackets improve steering response, center axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling * SpeedBump and progressive bump stops provide progressive compression during high-speed suspension movement * Front sway bar quick-disconnects * Full range of movement for off-road flex and articulation * TeraFlex Limited Lifetime Warranty against defects
Not Yet Reviewed
$7,649.83
Turn your Jeep into a serious off road rig with JKS J-Krawl Fox 3.0 Factory Race Series suspension systems. Designed for maximum articulation and adjustability with added tire and ground clearance, these complete hardcore systems take your Jeep down to its bare frame to make room for an all-new suspension using the factory pick-up points. At the heart of each J-Krawl lift kit is a set of J-Flex or J-Link upper and lower adjustable control arms and sway bar Quicker disconnects providing more strength for trails and extreme rock crawling brawn, along with adjustability to dial in front caster, rear pinion, and overall vehicle wheelbase. In addition to the high-strength adjustable control arms, the J-Krawl systems include dual rate coil springs, adjustable front track bar, rear track bar bracket, and Fox 3.0 Factory Race Series shocks to maximize travel and performance. Select the kit designed for your Jeep. Fox 3.0 Factory Race Series shocks feature: * 3.0 in. diameter bodies -- Impact extruded and CNC-machined 6061-T6 aluminum -- Type III anodized -- Weighs less than steel -- Resists corrosion * Position-sensitive internal bypass technology -- Plush, predictable ride over normal off-road driving conditions -- Counteract harsh bottom-outs or top-outs * Aluminum-finned remote reservoir -- Recirculating Reservoir Bridge dissipates heat fast for long lasting performance * Extreme-duty, hard chrome and heat-treated 7/8 in. steel shafts -- Add strength and rigidity -- Prevents bending or damage upon impacts * DSC—Dual Speed Compression adjusters -- Dial-in your Jeep's ride -- Adjust stiffness or softness -- Tool-free high- and low-speed compression adjustment * Race-bred high-flow pistons and proprietary seals * End treatments and components -- Anodized aluminum
Not Yet Reviewed
$8,855.55
—
$9,039.55
Turn your Jeep into a serious off road rig with JKS J-Krawl Fox 2.5 Performance Elite Series suspension systems. Designed for maximum articulation and adjustability with added tire and ground clearance, these complete hardcore systems take your Jeep down to its bare frame to make room for an all-new suspension using the factory pick-up points. At the heart of each J-Krawl lift kit is a set of J-Flex or J-Link upper and lower adjustable control arms and sway bar Quicker disconnects providing more strength for trails and extreme rock crawling brawn, along with adjustability to dial in front caster, rear pinion, and overall vehicle wheelbase. In addition to the high-strength adjustable control arms, the J-Krawl systems include dual rate coil springs, adjustable front track bar, rear track bar bracket, and Fox 2.5 Performance Elite Series shocks to maximize travel and performance. Select the kit designed for your Jeep. Fox 2.5 Performance Elite shocks feature: * 2.5 in. diameter bodies -- Impact extruded and CNC-machined 6061-T6 aluminum -- Type III anodized -- Weighs less than steel * External reservoirs -- Increased oil and nitrogen capacity for fade-free operation * Extreme-duty, hard chrome and heat-treated 7/8 in. steel shafts -- Add strength and rigidity * DSC—Dual Speed Compression adjusters -- Dial-in your Jeep's ride -- Adjust stiffness or softness * Race-developed high-flow pistons and proprietary seals * End treatments and components -- Black anodized aluminum
Not Yet Reviewed
$5,765.55
—
$5,949.55
Icon's entry-level offering, Stage 8 suspension systems improve performance and ride quality with the added lift and wheel travel you desire to tackle everything from rock crawling to high-speed desert running, and then drive home in comfort. Available in several lift heights, the kits include Icon's no-sag dual rate and/or multi-rate coil springs and their rebuildable, revalvable Vehicle-Specific (VS) Aluminum Series shocks with remote/piggyback reservoirs. Remote reservoir shocks are great for additional heat dissipation to prevent shock fade during off-road use. Together with other complementing components, these kits give your vehicle the superb ride, precise handling, and clearance to perform its best on and off-road. Choose the Icon Vehicle Dynamics Stage 8 suspension lift kit best suited to your vehicle.
Not Yet Reviewed
$6,458.69
—
$7,646.79
Icon's entry-level offering, Stage 7 suspension systems improve performance and ride quality with the added lift and wheel travel you desire to tackle everything from rock crawling to high-speed desert running, and then drive home in comfort. Available in several lift heights, the kits include Icon's no-sag dual rate and/or multi-rate coil springs and their rebuildable, revalvable Vehicle-Specific (VS) Aluminum Series shocks with or without remote/piggyback reservoirs. Remote reservoir shocks are great for additional heat dissipation to prevent shock fade during off-road use. Together with other complementing components, these kits give your Jeep the superb ride, precise handling, and clearance to perform its best on and off-road. Choose the Icon Vehicle Dynamics Stage 7 suspension lift kit best suited to your Jeep.
Not Yet Reviewed
$5,726.21
—
$6,914.31
Icon's entry-level offering, Stage 5 suspension systems improve performance and ride quality with the added lift and wheel travel you desire to tackle everything from rock crawling to high-speed desert running, and then drive home in comfort. Available in several lift heights, the kits include Icon's no-sag dual rate and/or multi-rate coil springs and their rebuildable, revalvable Vehicle-Specific (VS) Aluminum Series shocks or Omega Series 2 shocks with or without remote/piggyback reservoirs. Remote reservoir shocks are great for additional heat dissipation to prevent shock fade during off-road use. Together with other complementing components, these kits give your Jeep the superb ride, precise handling, and clearance to perform its best on and off-road. Choose the Icon Vehicle Dynamics Stage 5 suspension lift kit best suited to your Jeep.
Not Yet Reviewed
$5,145.21
Summit Bucks
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,509.00
—
$7,834.00
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,399.00
—
$8,159.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
