Availability
Showing In Stock Items. Show All 78 Items.
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
( 2 )
$1,499.95
The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic. When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a "service axle locker" message and the lockers will no longer engage. The repair would normally be to replace the sensor or the locker assembly, but they are not available, so the entire axle assembly needs replaced. Developed in a partnership with Americas Most Wanted 4X4, Z Automotive Jeep JL/JT Z-Locker OEM controller harnesses provide a simple fix for faulty OEM axle locker. Each harness will bypass the problematic sensor, allowing the locker to operate without the position sensor and provide the proper feedback to the Jeep's computers to keep the system operational without any errors or warnings. You get fully functioning lockers with no side effects. Installation is simple and they will not harm the Jeep's computers as they use the same signaling that it expects from the sensor. The connectors are the same ones used by Jeep and are watertight.
( 29 )
$179.00
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$696.99
—
$831.99
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$188.99
$170.09
—
$228.99
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$16.99
—
$38.99
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
On Sale
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$231.99
—
$235.99
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$924.99
—
$1,333.99
Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.84
Take your off-road or racing vehicle to a new level of traction with Spicer Drivetrain Products performance full spools. These unique carriers keep your axles spinning together for a competitive edge, eliminating the need for a differential case. This prevents gear failure from high-torque or high-impact conditions. The spools are machined from heat-treated chromoly 4130 forged steel for maximum strength, tested for hardness, and available for all makes. Say goodbye to case deflection and differential gear failure with performance full spools from Spicer Drivetrain!
( 2 )
$338.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 57 )
$26.99
—
$38.99
Driving off-road is what weekend thrillseekers live for, but over time it causes even the best automotive parts to wear. Warn service kits provide the correct parts for maintaining their locking hubs and getting your vehicle back on the trails. Most of these kits include new hardware, snap rings, and O-rings designed to bring new life to your hubs. Replacing part-time hubs can be expensive, so freshen them up instead with Warn service kits.
( 16 )
$38.99
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$140.99
On Sale
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$354.99
—
$428.99
$141.50
—
$386.09
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 21 )
$10.99
—
$19.99
Summit Bucks
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,554.99
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$324.99
—
$333.99
Currie ring and pinion sets are designed for outstanding durability and precise fit. These high-quality drivetrain components are available for popular differentials. Complete your build or replacement project with the help of Currie.
( 2 )
$348.99
On Sale
aFe Pro Series differential covers bring performance engineering to the protection of your axle's differentials. The durable cast aluminum construction with reinforced ribs provide maximum strength, while the machined fins and textured powdercoating provide a distinctive look. aFe Pro Series differential covers are available individually for front or rear with or without PRO Guard D2 synthetic 75W-90 oil and in complete sets with front, rear, and oil. Features: * Increased oil capacity * Internal/external ribs/fins transfer heat from oil to outside air for maximum cooling * Dual neodymium magnetic plugs--magnetic drain and deep reach fill plug—capture loose particles for maximum gear protection * Large oil level sight glass allows quick and easy oil inspection * Calibration plug set to the factory oil level to eliminate overfilling
( 21 )
$367.50
$177.00
—
$330.75
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$267.74
—
$526.99
Z Automotive Jeep JL/JT Z-Locker extension harnesses are optional accessories needed if you have a different mating connector or need to run the wires longer--usually needed for Air Locker installations. Z-Locker extension harnesses give a total reach from the factory locker location of over 7 1/2 ft.
Not Yet Reviewed
$15.00
Clearance
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$166.00
$117.50
—
$209.99
Crown Automotive axle oil slingers will help you guide your axle through the inner axle seal with ease. Crown makes these handy, yet hard to find, parts for many years, makes, and models.
( 2 )
$2.99
—
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
