Availability
Showing In Stock Items. Show All 25 Items.
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$54.99
RAM 200 Series clutch discs deliver drivability with performance. They're designed for mild horsepower increases in vehicles that are street-driven, where drivability is an important factor. The 200 Series features organic woven friction material that provides smooth engagement and a high level of driver comfort in operation. Order the model recommended for your vehicle and engine application.
( 7 )
$107.00
CV joints not only take the hassle out of lubing bearings, but they also transmit power at different angles without an increase in friction. When these joints have seen better days, update them with Crown Automotive CV joint repair kits. The leading detriment to CV joints is contamination through torn boots. Each kit comes with grease, small parts, and a new boot to allow for a clean joint and long life. Take care of your vehicle's joints with Crown Automotive CV joint repair kits.
( 2 )
$98.99
Advance Adapters offers a variety of overdrive replacement components—including these T90 transfer case dual handle shifters. They're available for many Jeep and truck applications, from the 1940s and up.
( 1 )
$92.40
Designed specifically for installations with clutch to transmission misalignment resulting in noise and vibration, Hays self-aligning throw-out bearings minimize these conditions. Clutch alignment can also vary due to normal wear and tear. Self-aligning bearings with their rugged performance characteristics are also a functional upgrade from standard bearings on older cars, when applicable.
( 4 )
$103.95
With Advanced Adapters clutch slave cylinders, you'll enjoy the consistent engagement of your clutch for new custom installations or as OEM replacements. Offered in different styles to fit a variety of applications, they help ensure reliable performance. Don't let your defective components sideline you—get back in the action with the Advance Adapters clutch slave cylinders!
Not Yet Reviewed
$92.40
Your vehicle can't go anywhere without wheels. Crown Automotive wheel hub assemblies get your wheels bolted up for smooth rolling. They have a selection to fit a range of applications, and all offer steel construction in direct replacement designs. Crown wheel hub assemblies ensure a good fit and lasting durability to take you wherever you want to go.
( 5 )
$95.99
Clearance
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 155 )
$57.99
—
$74.99
In a lifted Jeep JT application, it's necessary to lower the driveshaft carrier bearing to reduce driveline angles. These beautifully machined, billet aluminum bearing spacers from Rock Jock fit between the factory carrier bearing and the frame. They include new, longer hardware for installation.
Not Yet Reviewed
$79.00
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$58.99
Clearance
RSO Suspension ring and pinion gears are designed for the performance minded driver that requires strength and reliability above all else. They are forged from 8620 steel and heat-treated to handle the excess loads, from on the street to off-roading, while maintaining the ability to be used as a daily driver. Increase your lifted vehicle's performance and take your rock crawling experience to a whole new level with an upgraded ring and pinion gear kit from RSO Suspension. These aftermarket upgrade gear kits are sure to breathe new life into your lifted vehicle, especially when equipped with larger size aftermarket tires. Select the ring and pinion gear set from RSO Suspension that is recommended for your application. Features and benefits: * Forged 8620 steel and heat-treated to ensure a durable long lasting surface * RSO Suspension uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to setup * Regain lost power and torque from installing larger tires * Maximizes off-road and rock crawling performance * Mechanical expertise or professional installation recommended * All RSO Suspension ring and pinion sets come with one-year manufacturer warranty
Not Yet Reviewed
$109.99
$60.50
—
$109.99
Artec Industries 1-ton APEX front differential top caps are included in swap kits with the Daystar bushings or RockJock Johnny Joints UCA brackets, but not with the single adjustable truss upper link mount kits. Artec conveniently offers the APEX front differential top caps individually. These heavy-duty caps are CNC-cut and bent from thick mild steel and will weld directly to the differential casting, allowing the mounting of driver side upper control arm brackets. Choose the one designed to match your vehicle's application.
Not Yet Reviewed
$76.99
Having trouble getting into gear? Your synchronizer could be worn. Crown Automotive offers manual transmission synchros to restore smooth, accurate shifts. They will prevent gears from grinding during engagement and facilitate optimum performance. You can choose from the wide selection of applications available. Renew your shifting performance—get your collar and gears in sync with Crown Automotive manual transmission synchros.
( 2 )
$68.99
—
$106.99
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$77.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
