Availability
Showing In Stock Items. Show All 25 Items.
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 492 )
$857.99
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$964.99
—
$1,061.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$899.95
—
$999.95
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$899.95
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,132.99
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,049.95
Yukon Gear & Axle manual locking hub conversion kits are designed to replace the unreliable factory automatic hubs with high quality locking hubs. These kits include new premium locking hubs, spindles, high-strength Yukon 4340 chromoly outer axles (where applicable), and all mounting hardware for installation.
Not Yet Reviewed
$979.99
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$870.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$1,049.95
Need a new driveshaft for your rig? OMIX-ADA has a wide variety of stock replacement driveshafts offering OE quality for your Jeep or Willys vehicles. Get back on the trail with OMIX-ADA.
( 1 )
$759.99
Errrr, bang! Clunk clunk clunk. Very few parts last forever, especially those rotating at a high rate of speed. Spicer Drivetrain Products ring and pinion gears are perfect for replacing worn or damaged gears, changing ratios, or when refreshing the differentials. They hob and shave the gears for longevity with minimal mating stress, combine modern designs and materials including heat-treating and shot-peening to maximize life, and use high-grade steel for consistency and exceptional durability. Each gear set meets or exceeds Dana's standards for OEM equipment. Whether you need lower, higher, or the same ratio gears, look into Spicer Drivetrain ring and pinion gears with installation kit, available for hundreds of applications.
( 12 )
$846.99
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$757.44
Crown Automotive ring and pinion gear and installation kit combos are complete with all the components needed to swap out your ring and pinion gears. Everything required for a gear replacement and/or upgrade is included—gaskets, seals, shims, bearings, and all necessary hardware. These convenient kits are available for a wide variety of submodels, with component ratios tailored to your specific vehicle. Crown quality combos offer great performance and the best bang for your maintenance buck!
Not Yet Reviewed
$1,196.99
Crown Automotive stocks differential case kits that will keep your vehicle moving. They feature rugged steel construction and are available in a selection of assemblies with gear sets, or with shims, gaskets, and ring gear bolts—and many other choices in-between. Replace or build your needed power to keep those wheels turning with help from Crown differential case kits.
Not Yet Reviewed
$1,139.99
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$760.99
Yukon Gear & Axle Super Joint kits feature U-joints that will stand up to abuse and never let you down. Your off-road adventures can get a little crazy, and you need really good components to keep you travelin' over the terrain. Yukon Super Joints are forged from through-hardened 4340 chromoly and then titanium nitrite coated—creating U-joints with ultimate yield and tensile strength, plus an extremely hard surface! Some kits also include a nifty little grease gun and a tube of copper-based grease. Beef up your axle with the super strength of Yukon Gear & Axle Super Joint kits.
( 1 )
$772.99
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$768.99
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$784.99
—
$815.99
USA Standard gear axle shafts are high-quality replacements machined from steel for superior strength and performance. They're available for dozens of differential case design applications, such as AMC, Ford, GM, Chrysler, and Dana. The shafts are offered in nearly a hundred lengths and numerous wheel stud patterns. Order the model recommended for your vehicle.
( 36 )
$902.99
—
$1,016.99
Get your transmission in gear with OMIX-ADA manual transmission overhaul kits. Whether you're servicing a Borg-Warner T90 3-speed manual transmission from your Willys or a Tremec T150 manual transmission, these overhaul kits are specifically designed for each application to provide the fit and performance for easier shifting.
( 3 )
$886.99
Yukon Gear & Axle Grizzly lockers offer fierce power! These robust lockers are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Grizzly lockers feature forged cases with 8620 internals and a patent-pending internal locking mechanism for maximum strength. Assembled in the USA, these lockers will provide 100 percent power to both your tires, while still allowing for disengagement while negotiating turns. Whether your application is for the street, off-road, or drag racing, Yukon Gear & Axle Grizzly lockers will have your rig roaring with performance.
( 22 )
$988.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
