Availability
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
B&M Racing introduces the Precision SportShifter for 2007-18 Jeep Wrangler JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish which houses internal components made from super tough 4140 chromoly. The shift throw has been reduced by 35 percent over the factory shifter along with the detent pressure which has been significantly increased creating a noticeably stiffer shift feel. This was done to address problems with the softness of the factory shifter detent springs which easily pop out of gear while off-roading. The shifter uses the factory shift stick and knob.
( 12 )
$749.95
$673.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$999.95
$359.95
—
$898.95
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$631.95
$538.95
—
$899.95
On Sale
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 12 )
$175.95
—
$182.95
$158.35
—
$164.65
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$412.95
—
$449.95
$370.95
—
$403.95
On Sale
B&M Jeep shifter stick assemblies are designed specifically for all Jeep Wrangler TJ/JK models with 6-speed manual transmissions and can be used as either a direct-replacement of the factory shifter stick, or as the finishing touch when used with the B&M JK Precision SportShifter. They are constructed from high-strength 4340 nickel-chromoly steel and feature improved bends that provide more shifting leverage and comfort than the factory stick. The stock Jeep shift handle has a thick and soft rubber isolator between the shifter and the stick that reduces transmission noise inside of the Jeep, but degrades over time and results in a very "mushy" feel. B&M Jeep shifter stick assemblies feature a billet aluminum block with four replaceable rubber O-rings that provide isolation from transmission gear noise and also result in shorter, noticeably firmer and more positive shifts. The shift handle is finished off with a durable black e-coat and topped with a black round B&M logo engraved shift knob showing that you take off-road performance seriously. They feature a 3/8 in. x 16 thread pattern so you can also customize the look of your shifter with other styles and colors of shift knobs.
( 12 )
$274.95
$247.45
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$479.95
On Sale
Magnum Grip Pro Stick shifters from B&M include all of the standard Pro Stick features, plus the new Magnum grip handle, CNC-machined from billet aluminum. Compact, strong, and functional--what more could you ask for in a shifter for a drag race car--they're the ultimate shifter for Powerglide applications.
( 20 )
$389.95
—
$472.95
$253.95
—
$307.95
On Sale
B&M high-flow transmission filters are designed to help protect your transmission component, by removing unwanted particles from your automatic transmission fluid--and that's a good thing!
( 14 )
$31.92
$28.73
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$27.14
$24.43
—
$30.51
B&M heavy-duty transfer case shift cables are a must for select Jeep Wrangler JK owners from the early 2000s and up. These cables replace the failure-prone plastic ends with 6061 aluminum ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 37 in. long cable is an excellent option for lifted builds, and the powdercoated brackets will provide years of trouble-free shifts. These cables are compatible with the factory shifter but complement any aftermarket shifter designed to use a factory cable. Features at a glance: * Replaces the stock Jeep JK cable and plastic ends for reliable, positive shifts * Heavy-duty .425 in. cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 1 )
$188.95
On Sale
Recalibrate your automatic transmission for optimum performance and extended life! B&M Transpak kits create new shifting characteristics by re-routing fluids through your transmission's valve body. Each kit includes two options: RV/Heavy-Duty and Hi-Performance Street. RV/Heavy-Duty is for towing, off-roading, or other heavy-duty use. Hi-Performance Street gives you quicker, snappier shifts than RV/Heavy-Duty, with standard shift points and automatic features when in "drive."
( 24 )
$199.95
On Sale
B&M extended transfer case handles allow for easy reach and operation. The extended length also provides additional leverage, which reduces the effort required to shift. They are available in 6061 T-6 billet aluminum or in heavy-duty 4340 steel. Both include black ABS shift knob and offer easy direct-fit installation. Shift in and out of gear ranges with ease using B&M extended transfer case handles. Features include: * Replacement for factory stick * Ergonomic bends for improved shifting comfort * Billet aluminum is anodized black * Heavy-duty 4340 steel has a durable black E-coat finish
( 2 )
$299.95
—
$318.95
$194.95
—
$287.05
Made from the highest quality materials, these B&M manual shifter knobs incorporate the latest styling to give you the look and performance you want in a shift knob. They're available in a variety of materials and finishes to suit your needs.
( 2 )
$331.95
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$399.95
$219.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
