Availability
Showing In Stock Items. Show All 93 Items.
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 176 )
$134.99
OEM Automotive Tools GM harmonic balancer pullers save you time when removing harmonic balancers without tapped holes. They eliminate the need to remove the radiator. Many balancers found on GM and Mopar vehicles do not have tapped holes; these tool feature a "clip-in" design, allowing removal without bolting the puller to the balancer.
( 16 )
$65.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$40.99
—
$113.99
Connect your scan tool to your vehicle using Innova scan tool and code reader connection cables. They are available for the most popular computer types and simply plug-in your scan or code reader tool.
( 9 )
$19.99
Innova OBD1 kits offer compatibility with all their OBD2 code readers featuring removable cables in both the CarScan and FixAssist lines of tools. With these sets, you can perform tests like KOEO, KOER, timing check, cylinder balance, output state, wiggle, and more. As a leading supplier of test equipment and diagnostic reporting for the automotive aftermarket, Innova Electronic Corporation offers high-quality products, innovative diagnostics, and value to their customers with products like their OBD1 kits. OBD1 adapters included with the kit: * General Motors (1982-93 and some 1994-95 models) * Ford, Lincoln, Mercury (1983-95 models with EEC-IV systems) * Toyota, Lexus (1991-95) * Chrysler, Dodge, Plymouth (1984-95) * Jeep (1993-95) * Honda
( 4 )
$100.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$21.99
The right equipment can make your projects simpler and more enjoyable. Allstar Performance heavy-duty engine cradles will store, transport, and allow you to work more conveniently on your engines. Manufactured from 14-gauge, 1 in. square tubing, these cradles are given a black powdercoat finish to ward off rust and corrosion. The cradles include Grade 5 fasteners and a provision for mounting wheels (not included) with 1/2 in. studs. Your project's finished? Simply disassemble and store the cradles to free up floor space in your garage or shop. Allstar cradles are available for specific engine types, including LS, GM, Mopar, Ford, Chrysler, Dodge, Hemi, Jeep, Oldsmobile, and Pontiac. Order the model that best suits your application.
( 122 )
$99.99
Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines. Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge. The kits are available for a variety of master cylinders.
( 650 )
$82.35
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
Motive Products domestic and import adapter kits include everything you need to convert your existing power bleeder to work on most import and domestic cars using a round master cylinder reservoir. They include mounting hardware and multiple fittings for fast, easy brake bleeding.
( 122 )
$34.30
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$149.99
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 84 )
$160.95
Manufactured by Excel from Richmond, these axle seal installation tools are designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. The different inner and outer diameters of the puck part of the tool press can be used on many different seals. This superior quality tool provides more efficiency to save you time and is available in several models to work on a broad range of applications, including Dana 30, 44, 50, 60 and Dana 44 ICA. Choose the axle seal installation tool in the model designed for your application needs.
( 1 )
$63.99
On Sale
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
$541.44
—
$654.49
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
Roll and store your Jeep's doors with complete security and confidence using EZ4X4 EZ Rolling door carts. Doors are expensive and can become damaged when storing on the floor or leaning against the garage wall. With the EZ Rolling Door Cart home storage has never been more complete. Doors are secured on protective surface while the security hardware accepts the T-50 bracket to hold doors on the cart just like they were secured on the Jeep. Overtop adjustable lockers keep doors from bouncing out of place when the cart is being rolled to its storage location and locking caster wheels prevent the cart from moving once in secure a location. The durable lightweight aluminum EZ4X4 EZ Rolling carts, when not in use, fold in half, so they can go on vacation or travel with you to ensure a safe and convenient doors-off anywhere experience.
( 1 )
$329.99
—
$349.99
On Sale
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
$7.16
Summit Bucks
Are you replacing worn ball joints? Don't worry--Moog ball joint tools are there to help. Moog designed these tools with the professional mechanic and DIY specialist in mind. Don't struggle with lesser tools, trust the same Moog ball joint tools that the professionals trust.
( 3 )
$41.99
OTC secondary timing chain holders are part of OTC cam tool sets—and are also offered individually. These special tools hold the camshaft secondary chains in place on the idler sprocket during timing chain installation. Service your timing chains with the help of OTC specialty tools.
( 3 )
$68.99
Proform offers specialty tools to make harmonic balancer installation easier. Just thread the proper end into the crankshaft, and then rotate the nut pressing the bearing against the balancer. This in turn will slide the harmonic balancer onto the crankshaft smoothly. The tools are available in more than a dozen balancer bolt thread sizes, for universal or year/make and engine-specific applications.
( 156 )
$52.99
TeraFlex lower ball joint preload adjusting tools enable you to easily to adjust the lower ball joint preload amount. This preload tool is a must have for your new or broken-in TeraFlex HD ball joints.
( 1 )
$12.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
