Availability
On Sale
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 27 )
$899.99
$809.99
On Sale
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$999.99
$919.99
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
Painless Performance 23-circuit direct-fit Jeep YJ harnesses fit 1987-91 YJ Jeeps. These harnesses feature a factory-style bulkhead connector that mounts the fuse block in the OEM location. Each harness includes all the connectors and terminals needed as well as a detailed manual. Painless harnesses are factory color-coded and labeled for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay * Fuel injection power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Third brake light * Turn signals * Wipers and washer pump (front and rear)
( 4 )
$999.99
$899.99
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 1 )
$799.91
On Sale
DiabloSport Trinity 2 EX Platinum PCM swaps saves factory settings and returns easily to stock. Trinity T2 Platinum PCM swaps are designed for those who want the best of both worlds, pre-loaded, high performance tunes in addition to custom tuning capability. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows you like to bolt-on upgrades and extract every bit of horsepower out of your vehicle. That is where CMR custom tuning comes in. Their nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. These kits offer the most advanced performance programmer and monitoring setup of its kind. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Taking advantage of DiabloSports cutting-edge PCM Swap program allows you to focus on the sleek, new look with T2, while enjoying power and improved drivability, and the swap process is seamless, affordable, and best-in-class.
( 2 )
$1,099.95
$808.95
—
$999.95
On Sale
DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 2 )
$799.95
—
$849.95
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$765.24
On Sale
DiabloSport inTune i3 PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Select the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
Not Yet Reviewed
$873.95
$785.95
—
$799.95
Kleinn heavy-duty onboard air systems with horns are designed for the serious truck owner in mind. The 100 percent duty-cycle systems will supply air for inflating tires, powering air tools, and air suspension—and of course, honking your Kleinn train horn! Kleinn heavy-duty onboard air systems include: * Heavy-duty 150 psi waterproof air compressor (rated at 100 percent duty cycle) * 3-gallon air tank * Custom designed bolt-on powdercoated mounting brackets * Remote mount quick-connect tire inflator with storage bag and all necessary hardware, airline, and wiring * Kits are 100 percent bolt-on and require no drilling, welding, or vehicle modification
Not Yet Reviewed
$979.95
On Sale
Superchips Plus computer programmers deliver a dynamic blend of innovation paired with safety, simplicity, and assurance. With hundreds of gas vehicles covered, you can count on impressive power gains, improved mpg potential, and superior drivability. Dashpaq Plus includes high-definition screens, upgraded processor for quick read/write speed and monitor refresh rates, along with several innovative features, like Wi-Fi, multiple vehicle license options, and the ability to load custom tunes using DiabloSport CMR software. Additional features and benefits include: * Sharp, high-definition, 5 in. color touch screen * Pre-loaded tunes for performance, tow, economy, and more * Tap-and-Go quick navigation options to easily pull up your favorite options or gauge layout * Calculated data parameters (PIDs) including boost, horsepower, and torque ratings * Speedometer and rev limiter options * Manual entry options for tires, gears, and more * Virtual drag trip * Extensive data-logging capabilities with option to export and view on DataViewer software * Compatible with the Expandable Accessory Systems (EAS) sensors to monitor more parameters * Read and clear diagnostic trouble codes * Manage gauge art colors, set warning and alert thresholds, and customize your screen layout * Wi-Fi updates * Add additional vehicle licenses to tune multiple vehicles via Internet Update Software
( 8 )
$849.95
On Sale
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$899.95
OMIX-ADA alternators will keep the current flowing. They offer several styles and amperages for many applications. Get OMIX-ADA alternators to power your vehicle systems and accessories.
( 2 )
$759.99
On Sale
DiabloSport Trinity 2 EX PCM swaps deliver the sleek look of their advanced T2 programmer, while you enjoy more power and improved drivability. Each swap kit sets you up with Trinity 2 EX high-resolution 5 in. capacitive touch screen with full-swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. DiabloSport PCM swap kits include a one-time, free cross shipment of an unlocked PCM directly to you. This allows you to swap the PCM in your vehicle, without disabling the vehicle for long periods of time to send the PCM in to be unlocked. And DiabloSport modified PCMs offer some of the best mods in the industry. The swaps will also include an OBD2 extension cable that will be required to install in order to allow tuning and monitoring on that dash. DiabloSport Trinity 2 EX PCM swaps are best-in-class tuning solutions for your vehicle.
Not Yet Reviewed
$899.00
$808.95
Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.
( 14 )
$762.99
—
$1,034.99
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their Totally Integrated Power Modules (TIPM) control the distribution of power throughout your entire vehicle via the fuses and a computer. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. Choose the smart option to maintain the optimal performance of your Mopar's operations with Mopar Replacement modules.
( 1 )
$827.99
—
$1,036.99
Mopar Replacement offers engine control modules for a wide range of applications, including many Jeep, Dodge, Chrysler, and Ram vehicles from the 1950s and up. These new or remanufactured replacements are among the best and longest-lasting electrical system parts available. They will deliver the fit and performance you expect. Select the ECM recommended for your Mopar ride.
Not Yet Reviewed
$757.99
—
$1,067.99
Mopar Replacement body control modules are available for your Mopar vehicle to keep your electronic systems functioning properly. These Mopar Replacement parts are factory OEM parts and will fit and function just like the original. Programming may be required during installation. With genuine Mopar Replacement parts, quality is a starting point, not an afterthought.
( 2 )
$774.99
—
$1,076.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$752.99
—
$1,142.99
Mopar Replacement instrument panel wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that Mopar Replacement instrument wiring harnesses will provide the fit, form, and function of OE specifications. Select the harness designed to fit your application.
( 1 )
$751.99
—
$1,014.99
Mopar Replacement door wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that they will provide the fit, form, and function of OE specifications. Order the harness designed to fit your application.
( 2 )
$852.99
Mopar Replacement clips and multi-purpose retainers are genuine OE-replacements. These versatile clips are manufactured from quality materials and factory specs to fit and perform just like the originals. Restore, repair, or maintain your vehicle with the correct Mopar components.
( 4 )
$752.99
—
$1,052.99
Dorman remanufactured totally integrated power modules require no programming. They restore your vehicle's electrical system to original operation, regulating proper voltage distribution to functions you invariably rely upon, including the windshield wipers, the headlamps, the radio, the climate control and much more. Made from high-quality materials to meet or exceed OE power modules.
( 30 )
$773.99
—
$987.99
Mopar Replacement alternators will generate energy for specific vehicle applications. You can count on these genuine parts to provide the OEM fit and function that will keep your battery charged and power your electrical systems with the engine running. Restore and repair your vehicle with a Mopar alternator.
Not Yet Reviewed
$771.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
