Availability
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 191 )
$119.99
—
$191.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 389 )
$228.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 353 )
$149.99
—
$202.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$123.99
—
$152.99
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
If you're running headers with close tolerances or have an engine bay with little room, Summit Racing™ ceramic ignition wire sets are the cure for burnt and melting boots. Their ceramic coating acts as a heat mirror, reflecting infrared energy and heat away from the plug boot—and it's engineered to resist flaking and peeling. The 8mm spiral core silicone wires deliver maximum energy to the spark plugs with built-in RFI suppression for your street-driven vehicle. These affordably priced wire sets are true performance upgrade replacements for OE types. They're available (assembled or non-assembled) with different terminal and boot ends for fitment on a range of vehicle applications.
( 88 )
$127.99
—
$134.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1967 )
$118.95
$107.05
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$160.95
—
$189.95
$144.85
—
$170.95
These Chevrolet Performance engine valley covers are made of aluminum. They can be used for Chevrolet Performance SB2.2, Spider-type, intake manifolds, runners, or race applications.
( 47 )
$209.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$111.99
—
$186.99
Dragon Fire offers Performance ignition coils for a wide range of cars and trucks—including Chevrolet, GMC, Buick, Cadillac, Hummer, Isuzu, Pontiac, and Saab models from the early 2000s and up. These replacements are engineered to provide reliable spark energy and complete combustion. Their watertight, weatherproof connectors are designed using advance thermoresistant plastic to resist fracture and cracking from radiant heat and thermal cycling. The coils are tested to meet or exceed OE output voltage. High-temp epoxy filled construction prevents voltage leaks and RFI interference. Each unit also includes performance-grade primary and secondary bobbins with premium copper windings to ensure peak performance under load and extended service life. Order the coil packs recommended for your vehicle. FEATURES AND SPECS: * Direct OEM replacement * High-energy output * High-RPM Rated for NA or boosted applications * Brass high-tension terminals * Manufactured in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure long service life and perfect fitment
( 16 )
$249.95
Summit Bucks
ACDelco mechanical pumps are ideal replacement components for many vehicles on the road today. They're manufactured to meet and exceed OE specifications for fit and performance. The pumps are available in many styles, materials, and other options. Order the model recommended for your application. Features and benefits include: * Available for practically all GM vehicles as well as a wide range of non-GM vehicles * Completely pressure-tested for reliable, leak-free performance * Coated seals support seal longevity and durability * Heat-treated shaft assemblies and impellers provide superior strength and durability * High-quality bearings are permanently sealed and lubricated for greater durability and long life * Uniform wall sections and smooth coolant-flow cavities for efficient operation * Cast iron, aluminum, or steel design, depending on vehicle
( 440 )
$162.99
Summit Bucks
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1522 )
$252.40
Summit Bucks
ACDelco GM Genuine Parts lifter valley plates are designed, engineered, and tested to rigorous standards--and backed by General Motors. They're available in a variety of styles for vehicles from the 1990s and up. These true OE replacement parts offer a precise fit for an easier install. For optimal performance, stay with the brand your vehicle came with: GM Genuine Parts.
( 2 )
$166.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$123.99
—
$275.99
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 81 )
$150.99
—
$172.99
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control—on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model. Additional features: * 2 in. seamless extruded tube * 14mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm Bilstein digressive piston * Self-adjusting, deflective-disc independent rebound and compression
( 1404 )
$118.00
—
$156.00
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$156.99
Summit Bucks
ACDelco coil and ignition wiring harnesses will spark renewed energy for your engine. Wiring harnesses can deteriorate over time, leaving them unable to deliver the necessary voltage for power. Replace worn wiring with ACDelco coil and ignition wiring harnesses and keep the spark alive!
( 20 )
$106.99
On Sale
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$204.99
$174.24
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$106.95
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 142 )
$154.99
—
$305.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$152.99
—
$257.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
