Availability
Showing In Stock Items. Show All 96 Items.
On Sale
With Summit Racing branded all 100% silicone 8mm constructed wire, a 300ohm per foot wire wound EMI suppression core, high heat silicone boots and stainless steel and brass terminals, you get all the high end features a wire set can offer, without breaking the bank! The dual silicone High-Tear resistant jacketing with fiberglass matting, gives you the highest heat protection and superior terminal pull off values in the business! With our 300ohm per foot Wire-Wound magnetic suppression core, you can be sure of maximizing the voltage output of your ignition system, while maintaining high EMI resistance values. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery. Ultra High heat silicone spark plug boots provide superior radiant heat protection. High dielectric strength properties virtually eliminate voltage leakage and blow through. With all of these features built into our Summit Racing high-end 8mm sets, along with Made in the USA workmanship, you can be assured that installing one of our sets will give you the confidence and reliability you have come to expect from Summit Racing products.
( 1008 )
$49.99
—
$55.99
Summit Bucks
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$38.99
—
$47.99
Summit Bucks
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 12 )
$21.99
—
$34.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$40.99
—
$53.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$45.99
Summit Bucks
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$31.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$42.99
ACDelco ignition coil mounting brackets are GM-recommended replacement parts. These original equipment brackets deliver the ideal fit and function to restore support of your ignition coil. They're manufactured from steel and given a black finish. The brackets are available in models for hundreds of vehicles from the 1990s and up. Keep your ignition coils securely in place with ACDelco ignition coil mounting brackets.
( 2 )
$27.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$23.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 146 )
$43.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 23 )
$47.99
These Chevrolet Performance Parts MAF sensor housing adapters are designed to get your MAF sensor mounted properly. They are manufactured from quality materials and install onto the MAF sensor with no modifications.
( 7 )
$20.19
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 13 )
$27.99
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 24 )
$23.99
Standard Motor Blue Streak Premium Street Performance spark plug wire sets feature the same premium materials and workmanship as those Blue Streak supplies to winning race teams, but are engineered to fit street performance engine compartments. The patented clear-coat formulation and thick silicone outer jackets provide the best protection against heat and abrasion, while the fiberglass braid and Kevlar fiber give the wires superior strength. The wires feature 170 ohms/ft of resistance.
( 61 )
$37.99
Clearance
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 35 )
$42.99
$21.50
—
$37.99
Summit Bucks
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$34.99
—
$52.99
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$39.95
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$52.99
Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.
( 16 )
$30.99
—
$32.99
ACDelco GM Genuine Parts individual spark plug wires consist of a single wire, encased in an insulating material, connectors, and insulating boots. They are GM-recommended replacements for your vehicle's original components. The wires transfer high-voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 2 )
$28.99
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$21.99
—
$23.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$20.99
—
$35.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
