Availability
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 424 )
$600.00
—
$629.00
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
—
$699.99
Pacer Performance Flexy Flares fender flares offer extra protection against the mud, dirt, gravel, and road debris that would otherwise be thrown into your fenders and doors. Flexy Flares are manufactured from heavy-duty EPDM synthetic rubber that is steel-reinforced. These durable bolt-on flares won't crack or peel in cold weather. They're available in numerous sizes for both universal and custom-fit applications.
( 50 )
$610.99
—
$654.99
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$596.74
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 31 )
$519.00
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 42 )
$516.99
—
$580.99
Niche M248 Misano wheels feature five layered split-spokes, a recessed center hub designed for exposed lugs, and a flashy chrome finish. The one-piece cast aluminum rims are available in a variety of widths, diameters, bolt patterns, and other fitment options. A contemporary blend of style, strength, and performance!
Not Yet Reviewed
$529.00
Niche M249 Gamma wheels feature 10 split-Y spokes, a center hub designed for recessed lugs, and a brilliant chrome finish. These one-piece cast aluminum rims are available in multiple widths, diameters, bolt patterns, and other fitment options. A dazzling blend of style, strength, and performance!
Not Yet Reviewed
$529.00
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 322 )
$528.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$724.40
PowerStop Z17 Evolution Plus stock replacement brake kits with calipers have everything you need for an easy, bolt-on solution for your daily driver. They include Z17 Evolution Plus ceramic pads, Autospecialty brake rotors, and non-coated replacement calipers, along with stainless steel hardware. If you need a complete, fast, and easy solution that meets original equipment standards, then PowerStop's Z17 Autospecialty brake kits with calipers are the ideal choice to refresh your braking power. (Some models may include rotors for only the front or only the rear.)
( 47 )
$623.74
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$507.99
—
$615.99
Catco prides itself on leading the industry in new product development and efficient manufacturing processes for its EPA- and CARB-compliant catalytic converters. Aristo's proprietary substrate chemistry yields highly efficient loadings for lower cost and better converter efficiency while Catco's latest advanced-manufacturing technology ensures that all converters are built to exact OE dimensions and fitment. All this allows Catco to maintain industry-leading efficiency, productivity, and competitive pricing. Catco Federal/EPA direct-fit catalytic converters feature: * 409 stainless steel shell and neck construction for longer life * Aristo Clean by Design advanced catalyst technology to handle the toughest emissions problems * Increased precious metals loadings * Improved O2 storage and release * Exact O2 sensor location(s) * Lower emissions output * Long-term reliability * Keeps the MIL light off * Hardware included (where needed) * Provides for faster and easier installations * 5-year/50,000-mile warranty on converter body * 25,000-mile warranty on emissions
( 7 )
$504.99
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$566.99
If you've never seen rain run off fabric as quick as it hits then you need to take a look at these Covercraft Custom Fit WeatherShield HP vehicle covers. Covercraft teamed up with Nextec Applications who developed the EPIC encapsulating process, changing ordinary woven fibers into a strong shield that with proper care protects vehicles from rain, snow, pollutants, and UV damage. This process also protects vehicles from dust, bird droppings, and tree sap. Heat and condensation easily escape these breathable covers, while silicone polymers used in the encapsulating process protect painted finishes. These covers feature front and rear sewn-in urethane elastic for a tight fit, overlapped double needle stitched seams, non-scratch grommets, and due to their single incredible EPIC layer, can be maintained at home. Keep Mother-Nature at bay with Covercraft Custom Fit WeatherShield HP vehicle covers.
( 12 )
$598.99
—
$674.99
Baseplates are an essential part of flat towing, creating a connection point between the tow bar and your vehicle. Blue Ox tow bar baseplates are engineered to be strong, making connections safe and secure when flat towing. Vehicle specific, they provide the proper attachment points for your tow bar and feature durable steel construction, are hidden beneath the vehicle body, and bolt directly to chassis. Create a solid connection between your dinghy towed vehicle and your towing vehicle with Blue Ox two bar baseplates. Choose the one designed for your vehicle.
( 1 )
$609.00
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$558.00
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$661.50
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$575.10
SPEC Stage 2 Plus clutch kits are designed for street, drag race, pulling, and autocross use. They feature a multi-friction disc in a full-faced configuration with carbon semi-metallic material on one side and Kevlar® on the other. Bridging the gap between SPEC Stage 2 and Stage 3 clutch kits, the 2+ offers drivability and engagement quality characteristics of the Stage 2, but with a 15 to 20 percent higher torque capacity. Hubs are double-sprung with spring cover reliefs for flexibility—and heat-treated components for strength and durability. More than 700 models are available for vehicle-specific applications. Additional features of SPEC Stage 2 Plus clutch kits: * High-clamp pressure plate * Hybrid carbon-graphite and Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 7 )
$647.10
SPEC Stage 4 clutch kits are solid hub versions of their Stage 3 clutches. Each hub is solid with eight rivets and the assembly is heat-treated for strength and durability. They are available in a 3, 4, and 6-puck configurations. Use a 3-puck for the lightest option or a 6-puck for the smoothest engagement. The 4-puck kit is a good compromise for both. Street-drivable in 6-puck configuration, but not street friendly due to the rigid hub. Additional features of SPEC Stage 4 clutch kits: * High-clamp pressure plate * Carbon-graphite friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Great for road racing, rally, drag racing, drifting, and pulling
( 3 )
$575.10
SPEC Stage 5 clutch kits feature full-metallic discs with the highest possible friction co-efficient. They are street-drivable but not street friendly. Their hubs are solid with 12 rivets and each assembly is heat-treated for strength and durability. Additional features of SPEC Stage 5 clutch kits: * High-clamp pressure plate * Full-metallic friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Best for extreme street use and drag racing * Also excellent for pulling and autocross
Not Yet Reviewed
$746.10
McGard lug nuts are designed to last for life. These wheel fasteners are made of restricted chemistry steel for structural integrity, then triple nickel chrome plated in silver or black for lasting beauty. All McGard lug nuts are through-hardened and tempered, reaching the depth of hardness needed for their unsurpassed level of safety (unlike case-hardening, which is only a surface treatment). They're available in a variety of thread sizes, shank lengths and diameters, and seat and conical styles. McGard lug nuts also offer a lifetime guarantee against rust!
( 593 )
$592.99
Walker direct-fit catalytic converters outflow stock converters, and also include these features: Aluminized steel heat shields (many have dual shields), 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat. The materials and construction contribute to a long life and better performance. Walker units are direct replacements for OE converters and will install with little or no modification. Some converters have steel air tubes with perforated holes to help distribute the airflow evenly, without robbing power. New flanges are included when necessary. Hundreds of models and configurations are available for fitment on specific vehicle applications.
( 32 )
$531.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
