Availability
Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.
( 1 )
$634.70
—
$781.77
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
—
$699.99
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$646.99
No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.
( 71 )
$585.00
—
$615.00
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$534.95
—
$749.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
Keep your car level through the turns with a sway bar set from ST Suspensions. These front and rear assemblies will drastically reduce body roll when cornering. The solid steel bars are available in different thicknesses and configurations for precise fitment on specified vehicles. They're powdercoated for an attractive and durable finish. Order the ST Suspensions kit recommended for your application.
( 20 )
$629.00
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$549.58
—
$578.40
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$506.33
—
$514.57
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$560.00
SPEC Stage 3+ clutch kits are primarily intended for street use, drag racing, pulling, and autocrossing. As the flagship stage for a high-powered street or race car that requires a manageable and friendly engagement, Stage 3+ clutch kits feature carbon-graphite full-faced material that offers unparalleled life, friction co-efficient, and drivability in one package. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3+ clutch kits: * High-clamp pressure plate * Carbon semi-metallic friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 4 )
$517.50
SPEC Stage 5 clutch kits feature full-metallic discs with the highest possible friction co-efficient. They are street-drivable but not street friendly. Their hubs are solid with 12 rivets and each assembly is heat-treated for strength and durability. Additional features of SPEC Stage 5 clutch kits: * High-clamp pressure plate * Full-metallic friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Best for extreme street use and drag racing * Also excellent for pulling and autocross
Not Yet Reviewed
$508.50
Canton Racing canister oil filter kits give you everything you need to install a CM canister oil filter. The kits contain: * Billet remote CM oil filter housing * CM high-flow fine filtration filter element * 90 degree rotating billet aluminum block adapter * 8 ft. of stainless steel braided hose * All of the necessary fittings
( 1 )
$531.00
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$550.63
—
$628.78
Air Lift rear suspension kits, when integrated with the front, will allow you to adjust your ride height from the extreme, lowered stance popular at car shows to a safer, more comfortable height for road driving. Don't give up your drivability just to "dog leg". Take control and roll low!
Not Yet Reviewed
$650.00
Air Lift Performance Series air suspension kits offer 30 levels of awesome adjustability, giving you the ability to comfortably drive your car daily, slam it to the ground for a show-winning stance, or tear up your favorite racetrack--all with the touch of a button and twist of a knob. Performance Series options include lightweight monotube shocks or struts, with many of them offering up to 3 in. of threaded adjustability, allowing you to set the desired length for additional lift if you want more ground clearance or that perfect slammed position. This flexibility enables you to tune the suspension to match your needs without sacrificing precious stroke. Also, the monotube internals run cooler, are more sensitive, and weigh less than twin-tube models. Most Air Lift Performance air suspension kits require no modifications for installation. Every upper and lower mount is designed to facilitate an exact fit to your vehicle, and kits always include tabs and brackets for brake lines and ABS wiring, just like OEM. Everything needed to install is included (even specialized hardware), ensuring the best fit, the highest performance, and the lowest ride. Get your vehicle down with the versatility of Air Lift Performance Series kits. Order the kit(s) designed for your vehicle.
Not Yet Reviewed
$620.00
XClutch Stage 2R clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. XClutch utilizes the latest ceramic technology in their Stage 2R performance kits and are mated with a high performance pressure plate. These kits are recommended for vehicles requiring a higher level of torque holding and heat capacity. Order the clutch kit designed for your application needs.
( 1 )
$715.81
If you live where the sun is intense you need to use a lot of sunscreen and vehicles sitting outside need the sunscreen protection of Covercraft Custom Fit Sunbrella vehicle covers. Designed for sun-drenched areas where UV rays can rapidly degrade paint and interiors, Sunbrella covers are crafted from solution dyed woven acrylic and provide years of protection blocking UV and heat damage from your vehicles exterior and interior. Sunbrella is exceptionally strong making it perfect for any wheels that spend extended time stored outdoors. These durable, great-fitting, long-lasting covers feature reinforced, non-scratch grommets for easy tie-down and stay-put protection against wind. From the humid hot air of ocean communities to the hot dry arid desert communities, fading paint and dashboards are a problem. Provide an umbrella for your car, truck, or any vehicle under the sun with Covercraft Custom Fit Sunbrella vehicle covers.
( 3 )
$609.99
Don't let Mother Nature get the best of your vehicle. Protect it with custom fit WeatherShield HD vehicle covers from Covercraft. Their heavy-duty, 300 denier fiber construction results in extreme tear resistance and tensile strength. Developed for maximum performance in harsh environments, like intense sun climates and along the coast, a special process is used to treat the fibers of the fabric to provide UV opacity, repel water, block dust, tree sap, and bird droppings, and yet is still breathable to allow moisture and heat to escape from under the cover. These heavier covers have a much greater tensile strength to resist tears and gouges and feature double stitched overlapping seams, neoprene elastic in front and rear hems to keep cover in place, and reinforced, non-scratch grommets with a protective flap for use with tie-down rope. Shield your vehicle from nature's wrath with Covercraft Custom Fit WeatherShield HD vehicle covers.
Not Yet Reviewed
$613.99
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$598.00
—
$639.00
Action Clutch Ironman unsprung clutch kits are specifically designed for track-use applications and offer a 250 percent increased holding capacity. Utilizing extremely durable American sintered iron friction material, the rigid or unspring hub-type discs feature American-grade rivets. Best suited for those not looking to upgrade to a multi-disc kit yet, but who want to enjoy something affordable with a high torque holding capacity, these kits offer nearly double the clamping force which increases the torque capacity. The Ironman kits also offer some slippage on takeoff, which champions these kits as "go-to" kits with their repeatability and endurance. The clutch engagement is aggressive with an on/off feel and the kits will not introduce clutch chatter, but will have light engagement noise and some gear rattle. Action Clutch Ironman sprung clutch kits go through multiple quality checks after assembly, ensuring quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American sintered iron friction material * American grade rivets
Not Yet Reviewed
$535.46
Action Clutch Ironman sprung clutch kits are specifically designed for track-use applications and offer a 250 percent increased holding capacity. Utilizing extremely durable American sintered iron friction material, the spring hub-type discs feature full enclosed spring retainers and American-grade rivets. Best suited for those not looking to upgrade to a multi-disc kit yet, but who want to enjoy something affordable with a high torque holding capacity, these kits offer nearly double the clamping force which increases the torque capacity. The Ironman kits also offer some slippage on takeoff, which champions these kits as "go-to" kits with their repeatability and endurance. The clutch engagement is aggressive with an on/off feel and the kits will not introduce clutch chatter, but will have light engagement noise and some gear rattle. Action Clutch Ironman sprung clutch kits go through multiple quality checks after assembly, ensuring quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American sintered iron friction material * American grade rivets
Not Yet Reviewed
$535.46
Optic Armor oversized formed windows are highly scratch and chemical-resistant while being 50 to 75 percent lighter than glass. They are made from high-optical grade polycarbonate, making them virtually shatterproof, providing added durability as well as safety for the driver or operator. Products requiring a screen printed border are printed with a high-quality, permanent ink that will not flake or crack and gives the window a professional touch. Optic Armor offers many vehicle applications in a formed to factory curvature and their oversized windows allow for a cut-to-fit, flush-to-body install that is not only aerodynamic, but gives the installer the ability to create a custom look. Optic armor windows can be cleaned with standard glass cleaner.
( 7 )
$540.00
—
$615.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
