Availability
Showing In Stock Items. Show All 63 Items.
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1519 )
$269.99
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 313 )
$180.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 802 )
$289.95
$159.95
—
$271.95
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 19 )
$202.99
—
$241.99
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 42 )
$176.99
—
$219.99
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
Bosch remanufactured alternators and generators have new parts and are performance-tested to ensure longer, more reliable, vibration-free, and quiet operation with maximum performance. Features: * Full-load tested to guarantee compliance with Bosch's strict performance specifications * 100 percent factory-tested, units are remanufactured (not rebuilt) * Rotor slip rings machined to the toughest concentricity specifications in the industry for increased brush life and reduced electrical interference on computer-controlled vehicles * 100 percent new high-quality bearings * Voltage regulators and rectifiers tested (and replaced where required) ensuring stable voltage output and eliminating shorts and open circuits for maximum reliability, cranking, and starting * Built to last using high-quality materials and the most technologically advanced developments
( 21 )
$134.99
—
$254.99
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$133.99
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$117.99
—
$186.99
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$140.95
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 53 )
$131.99
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 240 )
$224.96
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 202 )
$164.99
Don't take chances with an old, questionable, or malfunctioning knock sensor that diminishes your vehicle's fuel economy, or worse, your engine. The engine knock sensors play a dual role in helping to monitor and protect your engine. Like other sensors, knock sensors monitor engine operation to optimize performance. In addition, knock sensors protect the engine against power-robbing and potentially destructive engine knock. Standard Motor Products replacement knock sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Performance.
( 12 )
$181.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1956 )
$178.95
Dorman power window switches are high-quality replacements to facilitate the ups-and-downs of window operation. They're designed to meet all OEM specifications and install in the stock location. Dozens of styles are available for fitment in specific vehicles.
( 76 )
$166.95
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 99 )
$134.99
The only way to maximize horsepower from a Honda® or Acura® engine is to get rid of the weak coil mounted inside the cap. These MSD Pro-Cap brass terminal distributor caps are specially constructed to allow the use of an external coil, such as an MSD Power Tower, to accept the high voltage of an MSD Blaster Coil. They also include an 8.5mm Super Conductor coil wire and crimp tool.
( 1 )
$131.95
The mass air flow (MAF) sensor detects the amount of air drawn into the engine and relays a signal to the engine control unit (ECU) to calculate the proper fuel delivery to the engine. DENSO created the world's first plug-in mass air flow sensor in 1996 and Denso mass air flow sensors meet the stringent requirements of auto manufacturers around the globe. Denso's improved MAF sensor technology utilizes a unique structure that reduces the exposure of the sensing unit. This helps to reduce sensor contamination for improved detection accuracy. Denso also uses a fine platinum wire sensing element coated with a glass film to further protect it from contaminants for extended sensor life. Key features and benefits of Denso mass air flow sensors include: * Denso's First Time Fit design allows for easy plug-in installation * Glass film coated sensing element reduces contamination and improves reliability * Platinum wire sensing element responds quickly to changes in air flow * Reduced size and weight * Sensing element air bypass structure is designed for improved detection accuracy * Helps deliver optimum combustion, performance, and emissions
( 6 )
$115.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 37 )
$102.99
—
$104.99
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 13 )
$147.99
Interstate Mega-Tron Plus automotive batteries are designed to meet or exceed OEM vehicle requirements for cold-cranking amps. They have removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron Plus automotive batteries will help you fire up your engine, time and time again, with no trouble.
( 38 )
$190.99
Interstate Mega-Tron II automotive batteries are designed to keep your vehicle starting, day after day. They feature removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron II automotive batteries are an excellent replacement for your dead battery.
( 47 )
$177.99
—
$227.99
Beck/Arnley offers a wide variety of direct-replacement turn signal/combination switches. They are critical replacement items for safety and are essential for passing state inspections. These complex switches combine turn signal functions with other vehicle functions, all on the same lever. Beck/Arnley turn signal/combination switches are plug-and-play for easy installation and are all quality-tested for trouble-free performance.
Not Yet Reviewed
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
