Availability
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 61 )
$2,295.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$2,491.95
—
$4,996.95
"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware
( 2 )
$2,659.99
—
$3,859.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 16 )
$3,099.99
On Sale
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,730.95
Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.
( 101 )
$2,155.71
—
$2,857.65
On Sale
B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.
( 13 )
$3,749.95
—
$4,049.95
$3,373.95
—
$3,643.95
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$4,527.95
—
$5,128.95
Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 3 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 3 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 heads * ATK dual plane intake manifold * Quick Fuel 680 cfm vacuum secondary carburetor * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Hydraulic roller camshaft .495in/.502ex 110LSA * HEI Distributor, plug wires and plugs * Holley 110 GPH mechanical fuel pump * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate
( 1 )
$4,504.99
Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 6 )
$3,034.99
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$2,122.95
—
$4,575.95
QA1 1988-98 C1500 level 2 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven single adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The kit will provide a total of 4 in. of drop when used with drop spindles, or 2 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. Level 2 easy bolt-on kits will add more stability and allow for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding required.
( 7 )
$2,219.95
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 7 )
$3,334.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
RideTech bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$2,550.00
—
$2,895.00
Classic Performance complete front and rear disc brake kits are designed as direct bolt-on applications. They include front rotors and calipers, a master cylinder, and rear rotors and calipers. The complete kits are available in different configurations to fit either stock or aftermarket drop spindles. Brake lines, a proportioning valve, and mounting hardware are also included to complete the installation. Improve your ride, braking, steering, and handling with Classic Performance complete front and rear disc brake kits.
( 21 )
$2,048.99
These Wilwood TC6R big brake front kits feature everything you need for maximum stopping power. They use a TC6R billet aluminum brake caliper, which generates unmatched clamping efficiency through six thick-walled stainless steel pistons. Those are matched to an advanced formula high-friction compound for quick response and extended fade resistance. These Wilwood TC6R big brake front kits are available with your choice of standard 16 in. directional-vane GT rotors or the high performance 16 in. cross-drilled, slotted, zinc-washed SRP rotors. Each rotor is mated to high-strength, forged aluminum hats that are rib-reinforced to carry extreme loads and are black anodized to prevent oxidation. Get your truck or SUV stopped quickly with one of these Wilwood TC6R big brake front kits.
( 20 )
$2,901.75
—
$3,092.33
QA1 1988-98 C1500 level 3 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven double-adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The bolt-in upper control arm mount provides enhanced suspension geometry, which reduces anti-dive and ties in the upper shock mount. The kit will provide a total of 6 in. of drop when used with drop spindles, or 4 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. This easy bolt-in kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding is required.
( 4 )
$2,610.95
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,250.95
—
$3,478.95
Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 7 )
$2,988.99
QA1 1988-98 C1500 rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 torque arm suspension with C-notch bracket is manufactured from 12-gauge HSLA steel tubing for increased strength and powdercoated for long-lasting durability. Systems come complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This easy bolt-on kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything needed is included, all the way down to the hardware; no welding or bed removal required.
( 3 )
$2,791.76
—
$2,887.95
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,279.99
—
$5,172.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
