Availability
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1974 )
$118.95
—
$276.95
$107.05
—
$193.45
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 218 )
$259.95
$233.95
On Sale
Range Technology DFM modules are designed for late model GM refresh trucks and SUV's. This innovative device is the first in the market to provide a solution for disabling the dynamic fuel management system in these vehicles. By installing the DFM Module, users can effectively override the vehicle's built-in cylinder management system, allowing the engine to run on all cylinders, all the time! This leads to a better driving experience, and better long term engine reliability. This device is a true dual threat eliminating the most frustrating features your brand new truck or SUV's came equipped with, DFM and engine auto start/stop. By simply plugging this device on to your ECM, both systems will remain inactive at all times, leaving you with the peace of mind your engine will run more consistently without issues or interruption. Just hop in and drive without the worry of cylinders cutting off leaving you powerless or the engine shutting off at every stop sign, creating a hesitation on take-off or killing power to your in-cabin luxuries like A/C and rear entertainment systems. Features: * Disables dynamic fuel management (DFM) and engine auto start/stop systems * Smart inline technology integrates seamlessly with the ECM * Allows a true 'return to stock' status when removed with no trace for worry free dealer services * All-time V8 mode means better power on demand, a more consistent driving experience, reduced engine and valvetrain wear, and improved long term engine reliability * Enjoy that V8 rumble and avoid unpleasant exhaust notes and drone from running in cylinder deactivation mode * Plug-and-play installation can be completed in minutes * Some applications may still encounter 0-Cylinder Mode while coasting when 0% throttle input is detected at the ECM * 49-State Emissions Compliant * Made in USA
( 15 )
$249.95
$224.95
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
—
$289.95
$113.35
—
$217.95
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 464 )
$160.95
—
$263.15
$129.95
—
$202.45
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$142.95
—
$161.95
$121.95
—
$128.65
On Sale
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 69 )
$199.95
—
$230.95
$179.95
—
$207.85
On Sale
Hooker Blackheart steering shafts are designed to work with the Blackheart headers, but will also work as factory replacements. Blackheart steering shafts are e-coated for maximum protection against corrosion. These shafts offer a complete bolt-on solution, with no modifications necessary.
( 66 )
$179.95
$161.95
On Sale
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 107 )
$211.95
$190.75
On Sale
Mr. Gasket cast aluminum covers are constructed of high quality die-cast aluminum for an excellent fit. They are available in polished, finned, and ball-milled versions to fit a variety of engines. Features: * Top quality cast aluminum construction * Choice of smooth top polished, finned, or ball-milled designs * Some available in tall versions for additional rocker arm clearance * Thick gasket rail area for excellent sealing * Pre-punched breather openings with baffles * Includes mounting hardware
( 90 )
$114.95
—
$121.95
$103.45
—
$109.75
On Sale
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
$110.65
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$126.95
—
$132.95
$114.25
—
$119.65
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$155.95
—
$205.95
$140.35
—
$185.35
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 993 )
$237.95
—
$255.95
$178.95
—
$230.35
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
Whether your classic truck is a showpiece or a workhorse, you want to protect your bed floor from unsightly scratches and scuffs. Holley Classic Trucks heavy-duty bed mats cover your truck's bed with a high-strength, cord enhanced rubber compound that will not crack or break in extreme temperatures, safeguarding the floor against marks and damage. Every mat is custom-designed and molded to each application for a perfect fit without trimming for an easy, worry-free installation. Classic Trucks heavy-duty bed mats are extra-thick for toughness, keeping them from moving and your cargo in place. They also feature bumps on the bottom to allow for proper water drainage and airflow, keeping your bed floor dry, free of rust, and looking new. Protect your pride and joy; choose the Holley Classic Trucks bed mat that fits your vehicle.
( 17 )
$118.95
—
$178.95
$107.05
—
$161.05
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$168.94
—
$322.46
$152.05
—
$290.21
On Sale
Weiand Action Plus pumps are ideal for street use. They feature a stamped steel impeller that provides optimum water flow, while consuming less horsepower than stock pumps. The impeller also limits high rpm cavitation (air in the water) and will not crack, corrode, or fatigue like aluminum impellers can. The Action Plus pumps also feature a heavy-duty shaft, bearing, and seal. Action Plus aluminum pumps weigh approximately 30 to 50 percent less than stock iron pumps, and have an exclusive counterbore to keep the bearing from "walking" in the housing.
( 154 )
$181.95
—
$249.95
$163.75
—
$224.95
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 367 )
$164.95
—
$184.95
$148.45
—
$166.45
On Sale
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 100 Classic Series polished wheels. They'll amp up your ride's aesthetics with some old-school charm in a classic 5-spoke design that is sure to look great on both old and new muscle cars! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series polished rims designed to fit your application!
( 10 )
$181.95
—
$191.95
$163.75
—
$172.75
On Sale
Superlift lift leaf springs feature a spring rate that is reduced as much as possible, to emphasize suspension travel and a more compliant ride. These leaf springs are designed for your specific application, to ensure the lift and tire clearance you're looking for.
( 64 )
$129.99
—
$279.99
$110.49
—
$237.99
On Sale
Brothers Trucks Tucked Rear Bumper Brackets are exactly what you need for that "finished" look. Their tucked brackets pull the rear bumper inward enough to take up the unsightly factory gap between the rear bumper and the bed. This provides a greatly improved look while maintaining an OE appearance. Whether you are repairing due to damage, or just simply replacing them for those finishing touches, Brothers Trucks has exactly what you're looking for with their Tucked Rear Bumper Bracket Kits. These bracket kits include all brackets as well as all necessary hardware for installation. They are constructed with heavy gauge steel, then EDP coated, to provide high strength and corrosion protection. Features: * Custom length to tuck the rear bumper closer to the truck for a cleaner appearance that looks original at a glance * Brackets are heavy gauge steel for strength * Black EDP coated for corrosion protection * Fits trucks with fleetside bed and full size SUV's * Sold as a kit. Includes bumper brackets and hardware to bolt brackets to frame, bumper bolts sold separately
( 3 )
$149.95
$134.95
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 185 )
$149.95
—
$189.95
$107.95
—
$170.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
