Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
GMC YUKON XL 1500 Parts and Accessories
Showing In Stock Items. Show All 858 Items.
Not Showing Customizable Items. View Customizable Items.
ACDelco GM Genuine Parts Knock Sensors
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 111 )
$60.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 73 )
$69.99
—
$96.99
ACDelco Rear Main Seal Housings
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 10 )
$67.99
ACDelco Crankshaft Position Sensors
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 12 )
$59.99
ACDelco GM Genuine Parts Oil Pan Gaskets
ACDelco GM Genuine Parts oil pan gaskets are genuine parts that will provide the same performance, durability, and service life as the factory originals. Choosing the best quality to maintain your GM vehicle is easy--ACDelco GM Genuine Parts has the right fit, function, and form for confident, hassle-free service.
( 4 )
$51.99
Melling Oil Pumps
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 331 )
$72.99
Melling Factory Hydraulic Roller Lifters
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 22 )
$58.99
ACDelco Engine Oil Pressure Indicator Switches
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 30 )
$50.99
Hayden Rapid-Cool Transmission Oil Coolers
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 167 )
$53.99
—
$62.99
Dorman Rear Main Seal Covers
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$50.78
King HP-Series Rod Bearings
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 37 )
$61.99
—
$95.99
Summit Racing™ Street / Strip Series 8mm 300 Ohm Ignition Wires
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! - Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business - Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values - Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery - Ultra-high heat silicone spark plug boots provide superior radiant heat protection - High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1033 )
$59.99
—
$81.99
Cometic MLS Head Gaskets
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for additional strength over traditional gaskets. They contain load-controlled embossments that help conform load distribution across the sealing area, and where applicable, valve pocketing to avoid chamber intrusion. This creates an exceptional seal by requiring less clamp load and resulting in less bore distortion. The stainless-steel outer layers utilize a rubber-binder coating that features high-temperature and chemical-resistant polymers. These gaskets are available for most cylinder heads. As with all Cometic MLS head gaskets, no sealants or re-torque is required when properly installed on prepared surfaces. Get the engine performance you want with an assist from the Cometic MLS head gaskets best suited for your application.
( 576 )
$85.39
—
$92.35
TCI Filler Tubes and Dipsticks
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 189 )
$65.95
Chevrolet Performance Composition Head Gaskets
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 124 )
$59.99
—
$99.99
Hastings Premium Ductile Ring Sets
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 155 )
$55.99
—
$92.99
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 99 )
$51.99
—
$66.99
ATP Flexplates
ATP offers replacement flexplates in a variety of sizes, shapes, and configurations. The steel plates are manufactured to exacting tolerance for precise fit. Order the model recommended for your year/make, engine, and transmission application.
( 202 )
$62.99
—
$87.99
Chevrolet Performance Replacement Timing Chains
Replace your timing chain with a new one from Chevrolet Performance. Designed specifically for your engine, many applications are available.
( 1 )
$74.99
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 9 )
$77.99
—
$94.99
ACDelco Ignition Coils
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 35 )
$53.99
—
$92.99
Fel-Pro PermaTorque MLS Head Gaskets
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 91 )
$50.99
Melling Timing Chain Sets
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 142 )
$52.99
—
$82.99
Dorman Knock Sensor Kits
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 21 )
$61.99
