Availability
Showing In Stock Items. Show All 18 Items.
On Sale
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
( 1 )
$269.95
$242.95
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 89 )
$42.79
—
$117.95
$38.51
—
$106.15
On Sale
Are you tired of jiggling your ignition key to get your engine started? Replace that worn-out ignition switch with a quality reproduction piece from Scott Drake. Scott Drake manufactures these switches from stock specifications for maintenance-free operation.
( 17 )
$22.55
$20.30
On Sale
Holley drive-by-wire throttle body wiring harnesses are designed for use with the Holley Dominator ECU, as well as the factory drive-by-wire throttle body. These harnesses feature pre-terminated connections, ensuring true plug-n-play installation.
Not Yet Reviewed
$474.95
$426.95
On Sale
Morimoto OEM LED conversion harness H129K is designed to adapt the 2017-19 Ford F-250 LED headlights onto trucks that came standard with base H13 dual halogen headlamps. This wiring harness kit allows you to upgrade to the most modern Super Duty look without cutting, splicing, or modifying anything on the truck's factory harness. * PLUG-N-PLAY: This wiring harness kit is a seamless solution to keep your low and high beams under control on the new OEM LED lights using the original controls inside the cabin. The outputs plug directly into the multi-pin connector on the back of each headlight from Ford. * ADVANCED: The unique Morimoto relay harness is designed to retain full function of the OEM headlight just like it came from the factory. No hiccups, no flickering, no problem! * OEM GRADE: Aside from being ahead of the game from a technical standpoint, the Morimoto HD relay harness is also a work of art. With its wiring protected by abrasion-resistant Techflex mesh sleeving and its extruded aluminum relay shell that's been anodized and laser-engraved, the MotoControl harness will look factory fresh under the hood!
( 2 )
$368.00
$294.40
On Sale
Due to the routing, exposure, and general lack of protection on the small charging circuit sense wires that are routed from Powertrain Control Module (PCM) to the alternator, it is common for wire damage to be experienced. And if the charging circuit MIL illuminates intermittingly or continuously on your truck dash, this may be your problem. A Fleece Performance charging circuit harness is your fix. These harness solutions are drop replacements—no cutting or splicing--for failed factory harnesses causing the problem. Each one installs directly in-line with factory connections, allowing you to reroute the alternator connection along the top side of the engine, and avoiding the unprotected channel routing on the underside of the engine. Designed and produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.
Not Yet Reviewed
$125.99
$107.09
On Sale
SCT X4 OBD II cables will keep you connected to your vehicle. The cable that came with your X4 is missing, or maybe it's damaged. No problem--SCT has HDMI/OBD II replacements that will once again allow you to easily and quickly install your X4 to the port on your vehicle. Power up your device with genuine SCT Performance X4 OBD II cables.
Not Yet Reviewed
$28.99
$26.09
On Sale
For classic car owners, every detail matters—right down to the keys they carry. Scott Drake blank keys are exact replicas of the factory originals for your '60s or '70s era Mustang. These keys are available for the ignition, doors, trunk, and glove box, all ready for you to have cut for precise fitment and use. Several shapes and styles are available, featuring the Ford logo engraved on one side, with the iconic Pony emblem on the flip side (where shown). These vintage keys are ideal for replacements, a fresh appearance, or to display as part of a Mustang collection.
( 16 )
$4.70
—
$5.16
$4.23
—
$4.64
On Sale
Morimoto X3B LED third brake flash modules can be added to your X3B brake light setup to automatically pulse the brake light optics 3x before staying on when you step on the brake pedal. Though the standard optics and powerful 3W LEDs in the X3B brake lights are already highly visible day and night, the addition of this module makes sure that followers will notice when you step on the brakes. This feature has become standard on many of the most modern trucks and cars. The X3B Rapid Flash module is 100 percent plug-and-play with the Morimoto X3B brake lights and can be connected in seconds. It is not compatible with other aftermarket products or OEM units.
Not Yet Reviewed
$36.00
$28.80
On Sale
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$14.99
—
$56.99
$12.74
—
$48.44
On Sale
Freshen up your ride's interior with reproduction interior bezels by Scott Drake. These bezels are manufactured using quality materials, ensuring a proper fit. If you need a radio, an ignition switch bezel, etc., Scott Drake has you covered!
( 11 )
$27.31
$24.58
On Sale
Fleece Performance fuel heaters ensure optimal fuel flow and combustion in engines, especially in cold climates. They are for use in Fleece's heated fuel filter kits, including PowerFlo lift pumps with a heater provision on the filter base. Fuel heater specifications: * At typical fuel flow rates a temperature increase between 4 to 8 degrees F will occur across the heating element * Temperature switching points: -- ON: 28.4 degrees +/- 5.4 degrees F -- OFF: 48.2 degrees +/- 5.4 degrees F
Not Yet Reviewed
$139.00
$118.15
On Sale
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 18 )
$77.99
—
$83.99
$66.29
—
$71.39
On Sale
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
$44.80
On Sale
Yukon Gear & Axle offers Zip Locker switch covers for the front or rear of your Yukon Zip Locker system. Yukon's Zip Locker system is the latest in "on-demand" traction and its air-operated design allows you to switch from an open differential to 100 percent lockup when you need it, giving you the ultimate in driver selectability. The switch covers are sold individually. Select the Yukon Zip Locker cover switches designed for your application needs.
Not Yet Reviewed
$10.99
$9.34
On Sale
Morimoto XB LED headlight adapters allow you to upgrade your existing units. These headlight adapters retain all OE functions and make installation of the XBs a simple plug-and-play operation. Morimoto headlight adapters are vehicle-specific, choose the correct XB LED connection for your vehicle.
Not Yet Reviewed
$11.99
$8.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
