Availability
Showing In Stock Items. Show All 171 Items.
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 43 )
$2,895.00
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,132.95
—
$2,182.95
Introduced in the early 1980s, the Tremec T-5 has become a highly evolved, extremely compact, and versatile 5-speed manual transmission. In its rich history, the T-5 has been installed as original equipment in pickup trucks, SUVs, and performance automobiles. Today, the T-5 is available in its best form to date—sometimes referred to as "world class" or Z spec (from Ford's part number 7003Z). It has a 2.95 first gear with .63 overdrive, hardened gears, short throw factory shifter, steel front bearing retainer, tapered output shaft bearing, and a seven tooth-drive speedometer gear. Best of all, the T-5 transmission has a torque rating of 300 lbs.-ft., making it a perfect option for any moderate powered hot rod, street car, or kit car. Additional details: * The most compact Tremec transmission available, making it a "go to" for projects with limited space * At 75 lbs. dry, it's attractive for weight-conscious builds * Excellent drivability is achieved with light shift effort and smooth, positive shift quality * Its .63 overdrive provides exceptional fuel mileage * Popular choice for weekend cruisers, street-rodders, and kit car enthusiasts
( 7 )
$2,000.00
Ford Performance Super-Duty T-5 transmissions are world class components for your hardcore street machine. Features include: * Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter * 300 ft./lbs. torque capacity * Double-moly 2nd speed, 3rd speed and countershaft cluster gears * Carbon-fiber 3-4 blocker rings * Improved synchronizers and bearings * 1-1/16 in. diameter 10-tooth input spline * 28-tooth output spline * 7-tooth speedometer drive gear * Cobra-style pocket bearing
( 32 )
$2,286.99
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,967.95
—
$2,606.95
These Ford Performance Parts Tremec 6-speed transmissions are designed to withstand the abuse of the street or strip. The hardened internals are built to withstand up to 700 ft.-lbs. of torque, while still giving you quick and precise shifts throughout the rev range. These T56 Magnum transmissions come equipped with multiple shifter mounting options and provisions for either an electronic or mechanical speedometer, making them very versatile. Whether you're building a drag car, hot rod, or just wanting to beef up your existing system, these Ford Performance Parts Tremec 6-speed transmissions are the answer you are looking for.
( 4 )
$3,899.99
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 195 )
$405.99
Ford Performance Parts 8.8 in. IRS loaded differential housings are improvements to the rear axle of your Mustang. Whether you're replacing the original in your manual or strengthening the cast aluminum model in your automatic, there's nothing better than Ford Performance differential housings to do the job perfectly. Besides, who knows your Mustang better than the maker? These 8.8 in. IRS housings are fully loaded with forged, and CNC-cut gear sets installed. They feature strong cast iron topped with an aluminum differential cover, and, depending on the application chosen, a Torsen or Traction-Lok differential is included. If your automatic sees a lot of track time or your manual has a broken housing, your only choice should be genuine Ford Performance 8.8 in. IRS loaded differential housings.
( 3 )
$1,189.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$3,349.95
—
$3,375.95
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 30 )
$1,809.95
—
$1,865.95
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 98 )
$870.41
—
$1,392.65
A must for your 2015 and later model Mustang—Ford Performance Parts half shaft upgrade axles deliver a robust drivetrain solution to support the higher torque loads of your power-producing muscle car. These better-than-stock performance shafts feature larger diameters, proprietary materials, and CNC-machining—which makes them a stronger and healthier option for your high-powered, sticky-tire-running machine. And with their anti-wheel hop technology, your Mustang will surely put its power to the pavement. Factory half shafts can't handle the additional stresses of your modified ride; for optimum performance, install the Ford Performance Parts half shaft upgrade axles designed for your submodel.
( 2 )
$2,274.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$463.99
—
$581.99
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,095.00
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
South Bend Clutch stock replacement kits are an upgrade for your GM, Ford, or Dodge diesel rig. These single-disc kits offer organic friction material for smooth engagement with a high-quality construction for longer service life. The kits are available with or without a solid flywheel. Whether you need to replace your failing stock clutch or you want to increase your truck's horsepower and need a clutch that can keep up, South Bend Clutch has the best options for you. Select the stock replacement clutch needed.
( 5 )
$669.30
—
$696.32
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,095.00
—
$1,495.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 63 )
$799.00
Ford Performance Parts 2015-16 Mustang half shaft assemblies come as original equipment on Mustang GT350s. So whether you are replacing or upgrading, these are the parts you know will fit your Pony. Overview of Ford Mustang half shaft kits: * Fits 2015-17 Mustang GT, 2.3L EcoBoost, and V6 * Original equipment on 2015-17 Mustang GT350 * Increased diameter left side half shaft vs. Mustang GT * Value-priced upgrade for mild drivetrain modifications and naturally aspirated engines * Includes both right and left half shafts
( 5 )
$432.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
