Availability
Showing In Stock Items. Show All 54 Items.
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 493 )
$734.99
—
$929.99
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 43 )
$554.97
—
$907.99
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$884.99
—
$1,099.99
Yukon Gear & Axle Trac-Loc carrier cases are for Ford 8 in. and 9 in. housings and are available in street or race versions. These robust cases are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Trac-Loc carrier cases feature a left case half of 1541H billet steel for increased strength, eliminating the weak point where most failures are found. The top half is made from forged steel. Whether your application is for the street or drag racing, Yukon Gear & Axle Trac-Loc carrier cases will have your rig roaring with performance.
( 2 )
$821.99
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 144 )
$775.99
Yukon Gear & Axle Grizzly lockers offer fierce power! These robust lockers are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Grizzly lockers feature forged cases with 8620 internals and a patent-pending internal locking mechanism for maximum strength. Assembled in the USA, these lockers will provide 100 percent power to both your tires, while still allowing for disengagement while negotiating turns. Whether your application is for the street, off-road, or drag racing, Yukon Gear & Axle Grizzly lockers will have your rig roaring with performance.
( 22 )
$988.99
—
$1,065.99
Yukon Gear & Axle Trac Loc positraction internals will help you get your truck back on the road and working the way it is supposed to. After years and miles of use and abuse, your posi differential is going to need to a rebuild in order to operate efficiently. Yukon offers these inclusive kits for the maintenance overhaul. To ensure a top-notch gear set that will last longer than stock, Yukon utilizes better materials and manufacturing techniques than original specifications. Your truck is too big of an investment to neglect or to service with poor-quality parts. Order Trac Loc positraction internals from the experts at Yukon Gear & Axle.
( 6 )
$768.99
—
$878.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$864.99
—
$1,039.99
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 135 )
$822.99
—
$1,083.99
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 3 )
$843.99
—
$1,201.99
These Yukon Gear & Axle locking hubs feature all-steel construction, including chromoly internals, for the ultimate in durability and strength. They will not disengage under high-torque applications and default to the locked position under use. Engagement comes from just a 1/3-turn of the all-steel, low-profile bezel that offers improved ground clearance. The Yukon Gear & Axle locking hubs feature a proprietary coating on the locking gears for decreased friction and long life.
( 15 )
$753.99
Manufacturer Rebate
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 12 )
$755.99
—
$1,046.99
Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.
( 137 )
$762.53
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 43 )
$778.99
—
$930.99
Summit Racing™ Positraction differential carriers deliver aggressive, yet smooth, controllable traction. Our carriers feature nodular iron cases, forged steel internals, strong teeth—and they're fully rebuildable. We offer fitments for dozens of axle models. Whether replacing or upgrading, Summit Racing™ Positraction differential carriers will put power to the pavement, providing the confidence and performance you need.
( 49 )
$904.99
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 102 )
$787.99
—
$889.99
Yukon Gear & Axle Ultimate 88 axle kits offer maximum strength for the trails! Manufactured from 4340 chromoly, these double-drilled axles eliminate your factory C-clips and convert your housing to a stronger C-clip eliminators. No welding is required--just a little cutting to remove the factory axle bearing seat. Get years of hard use on the trails with Yukon Gear & Axle Ultimate 88 axle kits.
Not Yet Reviewed
$1,017.99
Yukon Gear & Axle offers differential carriers for a wide range of applications. Yukon uses top-quality materials and the latest manufacturing technologies to produce strong, durable carriers that you can depend on for proper traction. These aftermarket units are available in a variety of styles—such as limited-slip, open, Traction-Lok, and locker—for fitment on dozens of axle models and vehicle apps.
( 13 )
$754.99
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$764.98
—
$1,026.98
Motive Gear offers differential carrier cases for thousands of applications from 1955 and up. These replacements feature rugged steel construction and will accept all of your factory internal parts without any modifications. Models are available for countless differential case design types, including Chrysler, Dana, Ford, GM, and Toyota. Keep your wheels turning effectively; order the case and options recommended for your vehicle.
( 24 )
$883.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$820.98
—
$887.98
Alloy USA chromoly front axle shaft kits use high-tensile strength 4340 chromoly that is heat-treated twice, making them up to 30 percent stronger than stock. Keep your truck going on the trail, rocks, or mud with Alloy USA front axles.
( 4 )
$827.99
—
$944.99
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$827.99
Yukon Gear and Axle offers an extensive line of general replacement and high performance differential and axle combo kits for passenger car, SUV, and truck applications. High-quality alloys and the latest in heat-treating technologies provide strong components for on and off-road or at the track. Step up to the quality of Yukon parts produced in conjunction with world leaders in automotive manufacturing techniques and equipment.
( 3 )
$775.99
—
$1,099.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
